Navigation

  • Page 1

    V1.4

  • Page 2

    andronic 2060 2 Operating Instructions Version V 1.4 Date 07.04.2011 Author Pa/Scho Editing/Illustrations Pa Filename operating_instructions_andronic_2060 _v1_4.doc Trademark All product names or trademarks are properties of their respective own...

  • Page 3

    andronic 2060 Operating Instructions3 Table of contents Table of contents .................................................................. 3,3 3, Revisions.............................................................................. 3,3 3, Notice ...........................................

  • Page 4

    andronic 2060 4 Operating Instructions Notice In the creation of this manual, we have made the greatest effort and have taken the greatest care. We reserve the right to make changes to this handbook and to the controller or the programs, which are made necessary by technical progress, with...

  • Page 5

    andronic 2060 Operating Instructions5 Use as directed Introduction andron products are developed and produced according to the latest technologies. They are not delivered unless they have been tested for service reliability. The products may only be used as directed. If they are not used as ...

  • Page 6

    andronic 2060 6 Operating Instructions Switch on, start-up phase, turn off Switch on The switching on of the control as well as the entire system can be realized in different ways, therefore observe the informations of the machine manufacturer! Start-up phase 1. Switch on the control ...

  • Page 7

    andronic 2060 Operating Instructions7 Switch off / Shut down For switching off of the control as well as the whole machine pay attention to the following notes: To avoid a data lost or a hard disk damage the control must be shut down always in the correct way. That means the operating s...

  • Page 8

    andronic 2060 8 Operating Instructions Operating system setting, system additionals, user profiles, etc. Microsoft® Windows® XP Professional (SP2) is the installed operating system on the HMI computer of the andronic. Furthermore are essential patches form Service Pack 3 (SP3) installed...

  • Page 9

    andronic 2060 Operating Instructions9 Coordinate systems, zero points, reference points Machine zero point unequal control zero point 1 Machine zero point 2 Control zero point (Setpos) 3 Zero point workpiece pallet 4/5/6/7 Workpiece zero point (There can be even further relative zero po...

  • Page 10

    andronic 2060 10 Operating Instructions Menu overview ExpertModeShut downcontrolNC-Satz ModePanel-VersioneitherPanel versionorXPanel versionmenu_overview1_e.epsF3F5F1 INFO EXPF2SH-DOWNNCInformationsand messagesChange currentdatabaseInformationsand messagesF1F3F5F6F8F9F2ErrordirectorySystem ...

  • Page 11

    andronic 2060 Operating Instructions 11 NC ModePosition displayXPanel versionRemoteControlON / OFF menu_overview2_e.epsPANEL F5F8 F10 NCF7REM ONMACONSYSTEM F1 F1 F1F3F4F5F6F8F9F2F5 F6 F7 F8 F9 F2 F3 F10EXIT INFOINFO EDITG&M-CNVG&M code converterDNCF1F3F4F5F6F7F8...

  • Page 12

    andronic 2060 12 Operating Instructions Operating panel keys andron supports the control with a basic PLC program for the operating and control functions described below. It is possible that the machine manufacturer delivers a own PLC program with different functions and extensions. If th...

  • Page 13

    andronic 2060 Operating Instructions 13 + ALL MOVE SET B A X Y Z C 01 001 0001 ALL MOVE MOVE SET SET ANM013 ! + + % I II 50 70 85 95 105 115 60 80 90 100 110 120 % 0 100 0 2 6 10 20 40 60 80 90 100 110 120 panel_keys_2_e.eps Machine keys Absolute, relative and reference point keys Reference p...

  • Page 14

    andronic 2060 14 Operating Instructions + ALL MOVE SET B A X Y Z C 01 001 0001ANM013 ! % I II 50 70 85 95 105 115 60 80 90 100 110 120 % 0 100 0 2 6 10 20 40 60 80 90 100 110 120 B A X Y Z C panel_keys_3_e.eps Manual travel keys Machine keys The manual travel keys consist of the axis keys A,...

  • Page 15

    andronic 2060 Operating Instructions 15 The Info system The Info system (INFO) can be called up in all operating modes with the function key F1. With the info selection box, following informations, news and programs are accessible: (Select and start with F1 [SELECT] or ENTER) Change da...

  • Page 16

    andronic 2060 16 Operating Instructions NC Mode The G&M code program conforming to DIN 66025/ISO 6983 is a widely-used standard, and the most frequently used type of tool machine programming. The G&M code converter is used to produce the control code required for processing in aut...

  • Page 17

    andronic 2060 Operating Instructions 17 5. Only now may the (environment) function simulation record be exited with END. 6. With another „NC START“ the currently valid functions as toll or pallet change, clamping (M10/M11) spindle start or spindle positioning, coolant (M7/M8/M9/M13/M14/...

  • Page 18

    andronic 2060 18 Operating Instructions Zero point offset (0-OFFS) The table contains the absolute displacement parameters for the G functions G54-G59. They can be manually entered or transferred as a position. There are four zero point offset tables. The first is for the programmable zero...

  • Page 19

    andronic 2060 Operating Instructions 19 Tool management Overview of functions 100 tool magazine locations, any number of tools in the data base, free configuration of tool types, several tool magazines, fixed coding of locations, duplo tools, tool life control, 3 different types o...

  • Page 20

    andronic 2060 20 Operating Instructions Edit magazine assignment table (TT-EDIT) The magazine assignment table contains the assignation of the T-number and of the tool (tool designation) to a magazine location and the reference to a duplo tool. The magazine assignment tool can be accessed...

  • Page 21

    andronic 2060 Operating Instructions 21 Edit tool data (TL-EDIT) The tool data blocks (data for a tool) are stored in individual files. Thanks to this, individual tools can be used on various tool lists (combination of different tools for one application), without producing double definitio...

  • Page 22

    andronic 2060 22 Operating Instructions Tool life acquisition To use the tool life acquisition, a value for the total tool life must be entered in the corresponding tool file. After the first application of the tool by the machine the status and the remaining tool life is entered automati...

  • Page 23

    andronic 2060 Operating Instructions 23 Options (OPTION) „Tool with expired tool life is inserted after inquiry, if no other tool is available“ This option is intended to facilitate that a tool is used longer than the entered tool life. 0 = no: If the tool management does not find a ...

  • Page 24

    andronic 2060 24 Operating Instructions Expert Mode In the EXPERT MODE, programming on the machine is restricted to the dialogue-led and graphically-supported entry of geometrical and technological parameters in a menu. The machine operator does not have to worry about axis movements. He ...

  • Page 25

    andronic 2060 Operating Instructions 25 Delete ident file (DELETE) Deletes selected ident file from the database. Load automatic program (AUTOM) Select ident file names and program names with the cursor (↑/↓) and acknowledge with ENTER. On the screen, the small position display appe...

  • Page 26

    andronic 2060 26 Operating Instructions System Applications Über den Menüpunkt der System-Anwendungen (F10 SYSTEM) sind eine Reihe von System-Programmen zugänglich. Die Programme sind unterteilt in Konfigurations- (F2) und Diagnose-Tools (F3). Configuration – main menu F1 androni...

  • Page 27

    andronic 2060 Operating Instructions 27 Technial Data Control andronic 2060L andronic 2060s CPU card Full-Size Slot CPU (alternatively) Pentium 4 / Pentium M / Celeron M Graphic, Ethernet, IDE controller onboard USB 2.0 Half-Size Slot CPU (alternatively) Celeron / Pentium M / Celeron M ...

  • Page 28

    andronic 2060 28 Operating Instructions andron GmbH Schlätterstraße 2 D-88142 Wasserburg/B. GermanyTel.: +49 (0) 8382/9855-0 Fax: +49 (0) 8382/9855-50 info@andron.de www.andron.de

x