Navigation

  • Page 1

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC1JINAN BCAMCNC MACHINERY CO.,LTD isthe professional manufacturer of Laser machineand CNC router for many years in China.We keep idea of innovation, workhard to makefamous brand and service for society.We treat ...

  • Page 2

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC2CNC ROUTER INSTRUCTIONBCM woodworking SERIES ADVERTISING MACHINEThank you for buying our series CNC router .This technical instruction goes with machines, it is also the instructional document whichmake sure y...

  • Page 3

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC3ⅠUnpacking InspectionBefore ex works, all the transducers of our CNC routers are inspected strictly and packedcarefully. However, damages may occur during transportation process due to variousfactors. Please...

  • Page 4

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC4to touch the tool and other motorial parts.2.6 Make sure the electric power is off when clean the machine. Do not clean it with theliquid or the spray, but the dry dust cloth and meanwhile with slushing oil.2....

  • Page 5

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC53.1 Installation Instruction of JINAN BCAMCNC BCM2030 CNC ROUTER:1). Put the engraving machine on a plane surface, using the sizing block to adjust the fourangles of the machine, we suggest to use gradienter t...

  • Page 6

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC66. Start driver program installation, when there is prompt of “ no subscription ofMS-WORD”, choose “continue”, appear prompt for finish, click “yes”.Download file from upper part program to the con...

  • Page 7

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC73. “function” + “num”, stop point processing function4. “function” + “ high speed”, display process5.“yes”+”stop”, help information3.25 Upgrade operationWhen the system need to upgrade,...

  • Page 8

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC8Our CNC router is a machine tool equipment, it has a certain running in period, it is betterto use in the low speed in the first three months, please use it intermittently and keep themotor not too hot, freque...

  • Page 9

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC95.15 The working material uneven or curve can affect the useful life of tools .Especially when the cutting depth is deeper than the edge cutting depth, thepart upper the edge will touch the working ware. In th...

  • Page 10

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC10to factory for maintenance.● After connect the controller with the computer, open the Control Program, whichreads “The edition is too old, and please download the update Control Program”Analysis and Sol...

  • Page 11

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC11The pulse equivalence of chosen file is not consistent with the pulse equivalence of thecontroller.Amend the pulse equivalence match with the chosen file, or download the file once more.● Finish size is not...

  • Page 12

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC12Analysis and Solution:1. Clearance in transmission parts of machine . Readjust the transmission parts.2. The line between Z axis driver and Z axis motor is damaged because of usage for longtime Or connecting ...

  • Page 13

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC13Analysis and Solution:1. Open circuit between aligning signal line and “TOOL” connection port on interfaceboard .2. ”CU-”connection port on interface board is not connected with the shell of spindlemo...

  • Page 14

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC143. 50 connecting line between controller and interface board relaxes or not connectedwell. Inspect if the connecting plug is damaged or not insert well. Re-insert the plugfirmly.4. Pulse signal lines of drive...

  • Page 15

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC15Analysis and Solution:1. There is no 5V voltage to support the controller . Inspect the 5v voltage output ofon-off electrical source. If output normal, then inspect the connecting line betweenelectrical sourc...

  • Page 16

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC16broken stitches don’t connect with plug well . Send it back to factory formaintenance.All the problems above can be found out through inspecting the voltage of correspondinglevel input point with multimeter...

  • Page 17

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC17COMMONFAULTREASONJUDGEMENTRESOLVENTMain spindle runningdown1.short circuit orcircuit obstruction2.transducer showsexceptional,transducer outputexceptionally3.main spindle fault1. using millimeter to measureth...

  • Page 18

    顾客至上 质量第一 服务优质Customer First Service First Quality FirstBCAMCNC18Do not workmomentarilyFluctuant voltageThere are mainly four conditions caused by fluctuant voltage.During Automatically working:1. the screen shows normal, but the data stop to change, it is nouse to press a...

x