Navigation

  • Page 1

    Machine operation stepsStart-up procedures1. Turn on the main machine switch2. Turn on pump switch3. Turn on machine the emergency stop switch4. Turn on the machine Rotary Switches5. The machine back to the mechanical origin6.In the processing of material surface for XYZ coordinate = 0.7. Z-axis ...

  • Page 2

    Thank you for purchasing BCAMCNC productsWebsite:actionURI(http://www.bcamgroup.com):www.bcamgroup.comactionURI(http://www.bcamcnc.com):www.bcamcnc.comactionURI(http://www.bcamlaser.com):www.bcamlaser.comService email: actionURI(mailto:service@bcamcnc.com):service@bcamgroup.comactionURI(mailto:Se...

  • Abstract

    Machine operation stepsStart-up procedures1. Turn on the main machine switch2. Turn on pump switch3. Turn on machine the emergency stop switch4. Turn on the machine Rotary Switches5. The machine back to the mechanical origin6.In the processing of material surface for XYZ coordinate = 0.7. Z-axis origin is cleared (Shift + z)8. In the lower left corner of the plate will be (xy = o)9. In the ArtCAM software mapping and saved to U disk10.U disk enclosure USB cable connection11. U disk file handle in which to find and load the file (Menu--↑ ↓--ok - 1)12. The start processing files (Start)Shutdown procedures1. Turn off the machine rotary switch2. Turn off the machine the emergency stop switch3. Turn off the pump switch4. Turn off the machine main switch

x