Navigation

  • Page 1

    CNC machine safety operationThis manual describes aware of safety considerations engravingmachine when using it, please read the manual carefully to avoidpersonal injury and damage to the machine.First, CNC engraving machines use basic precautionsl. Machine should be fixed on a stable ground, adj...

  • Page 2

    such as the machine does not start for a long time, can be manually eachpart of the lubrication; After adding the oil slowly back and forth, toensure lubrication oil can be uniformly applied to the rail and screw.2. Due to low temperatures, can be both the rail and screw add oil, plusthe best ant...

  • Page 3

    accordance with the engraving depth, the workpiece and the jig isinterference, to meet the above conditions try to get short.12. Prior to processing must be correct definition of X, Y, Z axis from theknife point. After replacing the tool, you must immediately redefined Zaxis from the knife point,...

  • Page 4

    by hand, others use must consent.8. Its prohibited on the beam and put the machine baffle anything to avoidfalling injury.9. During operation on the machine is prohibited lie, but not allowed tosit or lean on the machine frame.Fourth, note after the work1. Remove the chips, clean the machine, kee...

  • Page 5

    2.Spindle mounted on the machine must have security guards, orhigh-speed rotating components may be injury the human body.3.The electro-spindle high-speed rotation of the process do not makecontact with the rotating part of the spindle arm, otherwise it will causeinjury.4. Spindle operators do no...

  • Page 6

    Thank you for purchasing BCAMCNC productsWebsite:actionURI(http://www.bcamgroup.com):www.bcamgroup.comactionURI(http://www.bcamcnc.com):www.bcamcnc.comactionURI(http://www.bcamlaser.com):www.bcamlaser.comService email: actionURI(mailto:service@bcamcnc.com):service@bcamgroup.comactionURI(mailto:Se...

  • Abstract

    CNC machine safety operationThis manual describes aware of safety considerations engravingmachine when using it, please read the manual carefully to avoidpersonal injury and damage to the machine.First, CNC engraving machines use basic precautionsl. Machine should be fixed on a stable ground, adjust the machine avoidshaking and remain horizontal.2. Connected to the machine wire to ground firmly.3. Be careful not to place obstacles around the machine, work spaceshould be large enough.4. Engraving machine is high speed machining equipment, its speed up to24000RPM, so the operator must wear clothes, work wear hats, glovesprohibited.5. When the machine is working, staff and machines should keep certaindistance.6.When troubleshooting, It should cut power off to operate.7.To avoid lighting storm work to prevent the risk of long-range electricshock caused by lightning.Second´╝îPreparation work before use.1. Machine need warm up before work then check the lubrication system,

x