Navigation

  • Page 1

    PARAMETER MANUALB-63950EN/03FANUC Series 30*/300*/300*s-MODEL AFANUC Series 31*/310*/310*s-MODEL A FANUC Series 32*/320*/320*s-MODEL A

  • Page 2

    • No part of this manual may be reproduced in any form. • All specifications and designs are subject to change without notice. The products in this manual are controlled based on Japan’s “Foreign Exchange and Foreign Trade Law”. The export of Series 30i/300i/300is-...

  • Page 3

    Export Control Information This document and the information contained in this document are classified with an Export Control Classification Number of 2E201. It is restricted and controlled under US export regulations. If you intend to export (or reexport), the document, directly or i...

  • Page 4

  • Page 5

    B-63950EN/03 DEFINITION OF WARNING, CAUTION, AND NOTE s-1 DEFINITION OF WARNING, CAUTION, AND NOTE This manual includes safety precautions for protecting the user and preventing damage to the machine. Precautions are classified into Warning and Caution according to their bearing on safety. Also...

  • Page 6

  • Page 7

    B-63950EN/03 PREFACE p-1 PREFACE Applicable models The models covered by this manual, and their abbreviations are : Model name Abbreviation FANUC Series 30i –MODEL A 30i –A Series 30i FANUC Series 300i–MODEL A 300i–A Series 300i FANUC Series 300is–MODEL A 300is–A Series 300is FAN...

  • Page 8

    PREFACE B-63950EN/03 p-2 Related manuals of Series 30i/300i/300is- MODEL A Series 31i/310i/310is- MODEL A Series 32i/320i/320is- MODEL A The following table lists the manuals related to Series 30i/300i /300is-A, Series 31i/310i /310is-A, Series 32i/320i /320is-A. This manual is indicated by an...

  • Page 9

    B-63950EN/03 PREFACE p-3 Related manuals of SERVO MOTOR αi/βi series The following table lists the manuals related to SERVO MOTOR αi/βi series Table 2 Related manuals Manual name Specification number FANUC AC SERVO MOTOR αi series DESCRIPTIONS B-65262EN FANUC AC SPINDLE MOTOR αi series ...

  • Page 10

  • Page 11

    B-63950EN/03 TABLE OF CONTENTS c-1 TABLE OF CONTENTS DEFINITION OF WARNING, CAUTION, AND NOTE .................................s-1 PREFACE....................................................................................................p-1 1 DISPLAYING PARAMETERS................................

  • Page 12

    TABLE OF CONTENTS B-63950EN/03 c-2 4.6 PARAMETERS OF CNC SCREEN DISPLAY FUNCTIONS........................ 37 4.7 PARAMETERS OF ETHERNET/DATA SERVER FUNCTIONS.................. 38 4.8 PARAMETERS OF POWER MATE CNC.................................................... 42 4.9 PARAMETERS OF SYSTEM CON...

  • Page 13

    B-63950EN/03 TABLE OF CONTENTS c-3 4.39 PARAMETERS OF EXTERNAL DATA INPUT/OUTPUT .......................... 407 4.40 PARAMETERS OF MANUAL HANDLE RETRACE (1 OF 2) .................... 409 4.41 PARAMETERS OF GRAPHIC DISPLAY (1 OF 4) .................................... 415 4.42 PARAMETERS OF SCRE...

  • Page 14

    TABLE OF CONTENTS B-63950EN/03 c-4 4.71 PARAMETERS OF AXIS SWITCHING ..................................................... 557 4.72 PARAMETERS OF TOOL RETRACT AND RECOVER ............................ 557 4.73 PARAMETERS OF SCREEN DISPLAY COLORS (2 OF 2)...................... 558 4.74 PARAMETERS...

  • Page 15

    B-63950EN/03 TABLE OF CONTENTS c-5 4.104 PARAMETERS OF STRAIGHTNESS COMPENSATION (2 OF 2) ........... 658 4.105 PARAMETERS OF FLEXIBLE SYNCHRONOUS CONTROL (2 OF 2) .... 661 4.106 PARAMETERS OF MANUAL LINER/CIRCULAR INTERPOLATION........ 662 4.107 PARAMETERS OF THE MACHINING CONDITION SELECTION ...

  • Page 16

  • Page 17

    B-63950EN/03 1.DISPLAYING PARAMETERS - 1 - 1 DISPLAYING PARAMETERS Follow the procedure below to display parameters. 1 Press the function key on the MDI as many times as required, or alternatively, press the function key once, then the PARAM section display soft key. The parameter screen is t...

  • Page 18

    2.SETTING PARAMETERS FROM MDI B-63950EN/03 - 2 - 2 SETTING PARAMETERS FROM MDI Follow the procedure below to set parameters. 1 Place the NC in the MDI mode or the emergency stop state. 2 Follow the substeps below to enable writing of parameters. 2-1 To display the setting screen, press the fun...

  • Page 19

    B-63950EN/03 2.SETTING PARAMETERS FROM MDI - 3 - [Example] 12000 [INPUT] Data can be entered continuously for parameters, starting at the selected parameter, by separating each data item with a semicolon (;). [Example] Entering 10;20;30;40 and pressing the INPUT key assigns values 10, 20, 30...

  • Page 20

    B-63950EN/03 - 4 - 3. INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3 INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE This section explains the parameter input/output procedures for input/output devices connected to the reader/puncher interfac...

  • Page 21

    B-63950EN/03 - 5 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.1 OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE 1 Select the EDIT mode or set to Emergency stop. 2 To select the parameter screen, press the function key as many times as required, or al...

  • Page 22

    B-63950EN/03 - 6 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.2 INPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE 1 Place the NC in the emergency stop state. 2 Enable parameter writing. 2-1 To display the setting screen, press the function key as many ...

  • Page 23

    B-63950EN/03 - 7 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3 I/O FORMATS This section describes the I/O formats of parameters. Parameters are classified by data format as follows: Data format Remarks Bit Bit machine group Bit path Bit axis Bit spindle Data o...

  • Page 24

    B-63950EN/03 - 8 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.3.2 Inch/Metric Switching For parameters dependent on inch/metric switching such as those for length and feedrate, whether data is inch data or metric data is specified by the input mode in the case ...

  • Page 25

    B-63950EN/03 - 9 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3.4 Bit Machine Group Format N *****Q1 T ** P ******** T ** P ******** ・・ ・ ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numeric value...

  • Page 26

    B-63950EN/03 - 10 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.3.5 Bit Path Format N *****Q1 L ** P ******** L ** P ******** ・・ ・ ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numeric value after ...

  • Page 27

    B-63950EN/03 - 11 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3.6 Bit Axis Format N *****Q1 A ** P ******** A ** P ******** ・・ ・ ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numeric value after A...

  • Page 28

    B-63950EN/03 - 12 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.3.7 Bit Spindle Format N *****Q1 S ** P ******** S ** P ******** ・・ ・ ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numeric value aft...

  • Page 29

    B-63950EN/03 - 13 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3.8 Byte/Word/Two-Word Format N *****Q1 P ******** ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numeric value after P represents a paramete...

  • Page 30

    B-63950EN/03 - 14 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.3.10 Byte/Word/Two-Word Path Format N *****Q1 L ** P ****** L ** P ****** ・ ・ ・ ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numeric...

  • Page 31

    B-63950EN/03 - 15 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3.12 Byte/Word/Two-Word Spindle Format N *****Q1 S ** P ****** S ** P ****** ・ ・ ・ ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A numer...

  • Page 32

    B-63950EN/03 - 16 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.3.13 Real Number Format N ***** Q1 P ****** ; N ***** Q1 M ****** ; N ***** Q1 I****** ; A numeric value after N represents a parameter number. Q1 indicates that the data is parameter data. A ...

  • Page 33

    B-63950EN/03 - 17 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3.15 Real Number Path Format N ***** Q1L ** P ****** L ** P ****** ・ ・ ・ ; N ***** Q1L ** M ****** L ** M ****** ・ ・ ・ ; N ***** Q1L ** I****** L ** I ****** ・ ・ ・ ;...

  • Page 34

    B-63950EN/03 - 18 - 3.INPUTTING AND OUTPUTTING PARAMETERS THROUGH THE READER/PUNCHER INTERFACE3.3.16 Real Number Axis Format N ***** Q1A ** P ****** A ** P ****** ・ ・ ・ ; N ***** Q1A ** M ****** A ** M ****** ・ ・ ・ ; N ***** Q1A ** I****** A ** I ****** ・ ・ ・ ...

  • Page 35

    B-63950EN/03 - 19 - 3.INPUTTING AND OUTPUTTING PARAMETERSTHROUGH THE READER/PUNCHER INTERFACE3.3.17 Real Number Spindle Format N ***** Q1S ** P ****** S ** P ****** ・ ・ ・ ; N ***** Q1S ** M ****** S ** M ****** ・ ・ ・ ; N ***** Q1S ** I****** S ** I ****** ・ ・ ...

  • Page 36

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 20 - 4 DESCRIPTION OF PARAMETERS

  • Page 37

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 21 - 4.1 DATA TYPE Parameters are classified by data type as follows: Data type Valid data rangeRemarks Bit Bit machine group Bit path Bit axis Bit spindle 0 or 1 Byte Byte machine group Byte path Byte axis Byte spindle -128 to 127 0 to 255 Some param...

  • Page 38

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 22 - NOTE 1 Each of the parameters of the bit, bit machine group, bit path, bit axis, and bit spindle types consists of 8 bits for one data number (parameters with eight different meanings). 2 For machine group types, parameters corresponding to the max...

  • Page 39

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 23 - 4.2 REPRESENTATION OF PARAMETERS Parameters of the bit type, bit machine group type, bit path type, bit axis type, and bit spindle type #7 #6 #5 #4 #3 #2 #1 #0 0000 EIA NCR ISP CTV TVC Parameters other than the bit-type parameters above 1...

  • Page 40

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 24 - 4.3 STANDARD PARAMETER SETTING TABLES Overview This section defines the standard minimum data units and valid data ranges of the CNC parameters of the real type, real machine group type, real path type, real axis type, and real spindle type. The d...

  • Page 41

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 25 - (C) Velocity and angular velocity parameters Unit of data Increment system Minimum data unit Valid data range IS-A 0.01 0.0 to +999000.00 IS-B 0.001 0.0 to +999000.000 IS-C 0.0001 0.0 to +99999.9999 IS-D 0.00001 0.0 ...

  • Page 42

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 26 - (D)Acceleration and angular acceleration parameters Unit of data Increment system Minimum data unit Valid data range IS-A 0.01 0.00 to +999999.99 IS-B 0.001 0.000 to +999999.999 IS-C 0.0001 0.0000 to +99999.9999 IS-D...

  • Page 43

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 27 - 4.4 PARAMETERS OF SETTING #7 #6 #5 #4 #3 #2 #1 #0 0000 SEQ INI ISO TVC [Input type] Setting input [Data type] Bit path # 0 TVC TV check 0: Not performed 1: Performed # 1 ISO Code used for data output 0: EIA code 1: ISO code NO...

  • Page 44

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 28 - #7 #6 #5 #4 #3 #2 #1 #0 0001 FCV [Input type] Setting input [Data type] Bit path # 1 FCV Program format 0: Series 16 standard format 1: Series 15 format NOTE 1 Programs created in the Series 15 program format can be used for oper...

  • Page 45

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 29 - #7 #6 #5 #4 #3 #2 #1 #0 0010 PEC PRM PZS [Input type] Setting input [Data type] Bit path # 0 PZS When a part program is punched out, the O number is: 0: Not zero-suppressed. 1: Zero-suppressed. # 1 PRM When parameters are outpu...

  • Page 46

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 30 - 4.5 PARAMETERS OF READER/PUNCHER INTERFACE To transfer data (programs, parameters, and so forth) to and from an external input/output device through the I/O device interface (RS-232-C serial interface), the parameters described below need to be se...

  • Page 47

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 31 - 4.5.1 Parameters Common to All Channels 0020 I/O CHANNEL : Input/output device selection, or interface number for a foreground input device 0021 Foreground output device setting 0022 Background input device setting 0023 Background output de...

  • Page 48

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 32 - 0024 Setting of communication with the ladder development tool (FANUC LADDER-III, ladder editing package) [Input type] Setting input [Data type] Word [Valid data range] 0 to 255 This parameter is used to enable or disable the PMC online connec...

  • Page 49

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 33 - # 3 NCR Output of the end of block (EOB) in ISO code 0: LF, CR, CR are output. 1: Only LF is output. # 6 IOP Stopping a program output or input operation by a reset is: 0: Enabled 1: Disabled (Stopping a program input/output operation with...

  • Page 50

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 34 - # 7 MNC DNC operation from the memory card and external device subprogram call from the memory card are: 0: Not performed. 1: Performed. 4.5.2 Parameters of Channel 1 (I/O CHANNEL=0) #7 #6 #5 #4 #3 #2 #1 #0 0101 NFD ASI SB2 [Input t...

  • Page 51

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 35 - 0103 Baud rate (when I/O CHNNEL is set to 0) [Input type] Parameter input [Data type] Byte [Valid data range] 1 to 12 Set the baud rate of the input/output device corresponding to I/O CHANNEL=0. When setting this parameter, see the following t...

  • Page 52

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 36 - 0113 Baud rate (when I/O CHNNEL is set to 1) [Input type] Parameter input [Data type] Byte [Valid data range] 1 to 12 Set the baud rate of the input/output device corresponding to I/O CHANNEL=1. 4.5.4 Parameters of Channel 2 (I/O CHANNEL=2) ...

  • Page 53

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 37 - 4.6 PARAMETERS OF CNC SCREEN DISPLAY FUNCTIONS #7 #6 #5 #4 #3 #2 #1 #0 0300 PCM [Input type] Setting input [Data type] Bit # 0 PCM If the CNC screen display function is enabled, when a memory card interface is provided on the NC ...

  • Page 54

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 38 - 4.7 PARAMETERS OF ETHERNET/DATA SERVER FUNCTIONS #7 #6 #5 #4 #3 #2 #1 #0 0901 EFT [Input type] Setting input [Data type] Bit # 1 EFT The FTP file transfer function by the Ethernet function is: 0: Not used. 1: Used. NOTE In a mu...

  • Page 55

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 39 - # 6 DHC The DHCP client function is: 0: Not used. 1: Used. # 7 LCH In the LIST-GET service of the Data Server function, when a list file specifies 1025 or more files: 0: A check for duplicated file names is performed. 1: A check for duplic...

  • Page 56

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 40 - # 4 UNS In the CNC Unsolicited Messaging function, when the end of the function is requested by other than the CNC Unsolicited Messaging server currently connected: 0: The request for the end of the function is rejected. 1: The request for the ...

  • Page 57

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 41 - 0930 Maximum number of files that can be registered to the memory card of the Data Server and maximum size per file that can be registered [Input type] Parameter input [Data type] Word [Valid data range] 0, 10 to 15 No.930Maximum number of fi...

  • Page 58

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 42 - 4.8 PARAMETERS OF POWER MATE CNC #7 #6 #5 #4 #3 #2 #1 #0 0960 PPE PMN MD2 MD1 [Input type] Parameter input [Data type] Bit path # 1, 2 MD1,MD2 These parameters set a slave parameter input/output destination. Parameter MD2Parameter M...

  • Page 59

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 43 - 4.9 PARAMETERS OF SYSTEM CONFIGURATION 0980 Machine group number to which each path belongs NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte path [Val...

  • Page 60

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 44 - 0983 Path control type of each path NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 1 Set the path control type of each p...

  • Page 61

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 45 - 4.10 PARAMETERS OF AXIS CONTROL/INCREMENT SYSTEM #7 #6 #5 #4 #3 #2 #1 #0 1000 EEA [Input type] Parameter input [Data type] Bit # 0 EEA An extended axis name and extended spindle name are: 0: Invalid 1: Valid #7 #6 #5 #4 #3 #2 ...

  • Page 62

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 46 - # 4 XIK When LRP, bit 1 of parameter No.1401, is set to 0, namely, when positioning is performed using non-linear type positioning, if an interlock is applied to the machine along one of axes in positioning, 0: The machine stops moving along t...

  • Page 63

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 47 - #7 #6 #5 #4 #3 #2 #1 #0 1005 RMBxMCCxEDMxEDPxHJZx DLZx ZRNx [Input type] Parameter input [Data type] Bit axis # 0 ZRNx If a move command other than G28 is specified by automatic operation when no reference position return is performed yet...

  • Page 64

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 48 - # 5 EDMx In cutting feed, an external deceleration signal in the - direction for each axis is: 0: Invalid 1: Valid # 6 MCCx If a multi-axis amplifier is used, and another axis of the same amplifier is placed in the control axis detach stat...

  • Page 65

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 49 - #7 #6 #5 #4 #3 #2 #1 #0 ZMIx DIAx ROSx ROTx1006 ZMIx TCHxDIAx ROSx ROTx [Input type] Parameter input [Data type] Bit axis NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. ...

  • Page 66

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 50 - #7 #6 #5 #4 #3 #2 #1 #0 1007 G90xGRDxRAAx ALZx RTLx [Input type] Parameter input [Data type] Bit axis # 0 RTLx When manual reference position return is performed on a rotation axis (A type) with the deceleration dog pressed before a ref...

  • Page 67

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 51 - # 4 GRDx When absolute position detection is performed for an axis and the correspondence between the machine position and the position on the absolute-position detector has not yet been established for the axis, reference position setting with...

  • Page 68

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 52 - # 4 SFDx In reference position return based on the grid method, the reference position shift function is: 0: Disabled 1: Enabled # 5 RMCx When machine coordinate system selection (G53) is specified, bit 1 (RABx) of parameter No. 1008 for d...

  • Page 69

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 53 - #7 #6 #5 #4 #3 #2 #1 #0 1012 IDGx [Input type] Parameter input [Data type] Bit axis # 0 IDGx The function for setting the reference position again, without dogs, is: 0: Not inhibited. 1: Inhibited. (The alarm (PS0301) is issued.) ...

  • Page 70

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 54 - #7 #6 #5 #4 #3 #2 #1 #0 1013 IESP ISEx ISDx ISCx ISAx [Input type] Parameter input [Data type] Bit axis NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 0 ISA # 1 ...

  • Page 71

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 55 - #7 #6 #5 #4 #3 #2 #1 #0 1014 CDMx [Input type] Parameter input [Data type] Bit axis NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 7 CDMx The Cs contour control ax...

  • Page 72

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 56 - # 7 DWT When time for dwell per second is specified by P, the increment system: 0: Depends on the increment system 1: Does not depend on the increment system (1 ms) 1020 Program axis name for each axis [Input type] Parameter input [Data ty...

  • Page 73

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 57 - 1022 Setting of each axis in the basic coordinate system [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to 7 To determine a plane for circular interpolation, cutter compensation, and so forth (G17: Xp-Yp plane, G18: Z...

  • Page 74

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 58 - 1023 Number of the servo axis for each axis NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to Number of controlled axes Set...

  • Page 75

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 59 - 1031 Reference axis [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to Number of controlled axes The unit of some parameters common to all axes such as those for dry run feedrate and single-digit F1 feedrate may vary ac...

  • Page 76

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 60 - 4.11 PARAMETERS OF COORDINATES #7 #6 #5 #4 #3 #2 #1 #0 WZR NWS FPC ZCL ZPR 1201 WZR FPC ZCL ZPR [Input type] Parameter input [Data type] Bit path # 0 ZPR Automatic setting of a coordinate system when the manual reference position...

  • Page 77

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 61 - # 6 NWS The workpiece coordinate system shift amount setting screen is: 0: Displayed 1: Not displayed NOTE When the workpiece coordinate shift amount setting screen is not displayed, a workpiece coordinate system shift amount modification usi...

  • Page 78

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 62 - # 1 EWS The external workpiece zero point offset is made: 0: Valid 1: Invalid NOTE When the external workpiece zero point offset is made invalid, the following operation results: 1 As the external workpiece zero point offset on the workpiece ...

  • Page 79

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 63 - # 3 RLC Local coordinate system is 0: Not cancelled by reset 1: Cancelled by reset NOTE 1 When bit 6 (CLR) of parameter No. 3402 is set to 0, and bit 7 (WZR) of parameter No. 1201 is set to 1, the local coordinate system is cancelled, regardle...

  • Page 80

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 64 - # 5 R2O The output of the signal for the second reference position is: 0: Disabled. 1: Enabled. #7 WTC When workpiece coordinate system preset is done, actual tool length offset is: 0: Not considered. 1: Considered.. When this paramter is...

  • Page 81

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 65 - #7 #6 #5 #4 #3 #2 #1 #0 1207 WOL [Input type] Parameter input [Data type] Bit path # 0 WOL The calculation method for workpiece origin offset measurement value direct input is as follows: 0: In a machine that requires that the diff...

  • Page 82

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 66 - 1221 Workpiece zero point offset value in workpiece coordinate system 1 (G54) 1222 Workpiece zero point offset value in workpiece coordinate system 2(G55) 1223 Workpiece zero point offset value in workpiece coordinate system 3(G56) 1224 Workpie...

  • Page 83

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 67 - 1241 Coordinate value of the second reference position in the machine coordinate system 1242 Coordinate value of the third reference position in the machine coordinate system 1243 Coordinate value of the fourth reference position in the machin...

  • Page 84

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 68 - 1260 The shift amount per one rotation of a rotation axis NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Real axis [Unit of data] Degree [Minimum unit of...

  • Page 85

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 69 - 4.12 PARAMETERS OF STORED STROKE CHECK #7 #6 #5 #4 #3 #2 #1 #0 1300 BFA LZR RL3 LMS NAL OUT [Input type] Setting input [Data type] Bit path # 0 OUT The area inside or outside of the stored stroke check 2 is set as an inhibition area 0...

  • Page 86

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 70 - #7 #6 #5 #4 #3 #2 #1 #0 1301 PLC OTS OF1 NPC DLM [Input type] Setting input [Data type] Bit path # 0 DLM The stored stroke limit switching signals +EXLx and -EXLx for each axial direction are: 0: Disabled. 1: Enabled. When this parame...

  • Page 87

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 71 - # 7 PLC Stroke check before movement is: 0: Not performed 1: Performed NOTE This parameter is valid only when the option for stroke limit check before movement is selected. #7 #6 #5 #4 #3 #2 #1 #0 1310 OT3x OT2x [Input type] Settin...

  • Page 88

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 72 - 1320 Coordinate value I of stored stroke check 1 in the positive direction on each axis 1321 Coordinate value I of stored stroke check 1 in the negative direction on each axis [Input type] Parameter input [Data type] Real axis [Unit of data] m...

  • Page 89

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 73 - 1324 Coordinate value of stored stroke check 3 in the positive direction on each axis 1325 Coordinate value of stored stroke check 3 in the negative direction on each axis [Input type] Setting input [Data type] Real axis [Unit of data] mm, inc...

  • Page 90

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 74 - 4.13 PARAMETERS OF THE CHUCK AND TAIL STOCK BARRIER Profile of a chuck 1330 [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 1 Select a chuck figure. 0 : Chuck which holds a workpiece on the inner surface 1 : Chuck...

  • Page 91

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 75 - Dimensions of the claw of a chuck (L1) 1333 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 0 or positive ...

  • Page 92

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 76 - X coordinate of a chuck (CX) 1335 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 9 digit of minimum unit ...

  • Page 93

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 77 - Length of a tail stock (L) 1341 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 0 or positive 9 digit of m...

  • Page 94

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 78 - Length of a tail stock (L1) 1343 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 0 or positive 9 digit of ...

  • Page 95

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 79 - Length of a tail stock (L2) 1345 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 0 or positive 9 digit of ...

  • Page 96

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 80 - Z coordinate of a tail stock (TZ) 1348 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 9 digit of minimum ...

  • Page 97

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 81 - 4.14 PARAMETERS OF FEEDRATE #7 #6 #5 #4 #3 #2 #1 #0 1401 RDR TDR RF0 JZR LRP RPD [Input type] Parameter input [Data type] Bit path # 0 RPD Manual rapid traverse during the period from power-on time to the completion of the reference p...

  • Page 98

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 82 - # 1 JOV Jog override is: 0: Enabled 1: Disabled (tied to 100%) # 3 OV2 Signals used for 2nd feedrate override are 0: *AFV0 to AFV7 <G013> (specified every 1%) 1: *APF00 to *APF15 <G094, G095> (specified every 0.01%) # 4 JR...

  • Page 99

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 83 - #7 #6 #5 #4 #3 #2 #1 #0 FC0 FM3 DLF 1404 FC0 DLF [Input type] Parameter input [Data type] Bit path # 1 DLF After a reference position is set, manual reference position return performed at: 0: Rapid traverse rate (parameter No...

  • Page 100

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 84 - # 2 PCL The function for constant surface speed control without the position coder is: 0: Not used. 1: Used. NOTE The option for constant surface speed control without the position coder is required. # 3 HFR Feedrate command in rapid tr...

  • Page 101

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 85 - # 7 F1O For the cutting feedrate specified by a single-digit F code (F1 to F9), feedrate override, second feedrate override, and override cancellation are: 0: Disabled. 1: Enabled. NOTE For the F0 feedrate, rapid traverse override is enabled ...

  • Page 102

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 86 - 1411 Cutting feedrate NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Setting input [Data type] Real path [Unit of data] mm/min, inch/min, degree/min (input unit) [Minimum unit of ...

  • Page 103

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 87 - 1420 Rapid traverse rate for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range]...

  • Page 104

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 88 - 1424 Manual rapid traverse rate for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data...

  • Page 105

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 89 - 1428 Reference position return feedrate for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [V...

  • Page 106

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 90 - 1430 Maximum cutting feedrate for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data ...

  • Page 107

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 91 - 1441 External deceleration rate setting 2 for each axis in rapid traverse [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of t...

  • Page 108

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 92 - 1450 Change of feedrate for one graduation on the manual pulse generator during one-digit F feed code [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to 127 Set the constant that determines the change in feedrate as t...

  • Page 109

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 93 - 1460 Upper limit of feedrate for F1 to F4 1461 Upper limit of feedrate for F5 to F9 [Input type] Parameter input [Data type] Real path [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the incre...

  • Page 110

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 94 - 1474 Feedrate regarded as accumulated pulse 0. (corner control by feedrate (for gas cutting machine)) [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min,inch/min,deg/min (machine unit) [Valid data range] 0 to 32767 ...

  • Page 111

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 95 - 1496 Critical angle of automatic exact stop check [Input type] Parameter input [Data type] Word path [Unit of data] degree [Valid data range] 0 to 179 Set the critical internal angle of a corner in 1-degree steps to cause an exact stop in...

  • Page 112

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 96 - 4.15 PARAMETERS OF ACCELERATION/DECELERATION CONTROL #7 #6 #5 #4 #3 #2 #1 #0 1601 NCI RTO [Input type] Parameter input [Data type] Bit path # 4 RTO Block overlap in rapid traverse 0: Blocks are not overlapped in rapid traverse. 1:...

  • Page 113

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 97 - #7 #6 #5 #4 #3 #2 #1 #0 1604 SHP [Input type] Parameter input [Data type] Bit path # 0 SHP When automatic operation is started, the state equivalent to the specification of G5.1Q1 for AI contour control is: 0: Not set 1: Set Upon ...

  • Page 114

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 98 - # 5 THLx Acceleration/deceleration in threading cycles 0: Exponential acceleration/deceleration is applied. 1: The same acceleration/deceleration as for cutting feedrate is applied. (Depending on the settings of bits 1 (CTBx) and 0 (CTLx) of p...

  • Page 115

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 99 - # 3 TCO Blocks in a threading cycle are: 0: Not overlapped in rapid traverse. 1: Overlapped in rapid traverse. In a threading cycle that is a turning canned cycle, the rapid traverse overlap function can perform rapid traverse overlap between a ret...

  • Page 116

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 100 - For bell-shaped acceleration/deceleration Speed Rapid traverse rate(Parameter No. 1420) Time T1 T2 T2T2T2 T1 T1 : Setting of parameter No. 1620 T2 : Setting of parameter No. 1621 (However, T1 ≥ T2 must be satisfied.) Total acceleration (dece...

  • Page 117

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 101 - 1623 FL rate of exponential acceleration/deceleration in cutting feed for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment s...

  • Page 118

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 102 - 1627 FL rate for acceleration/deceleration in threading cycles for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system ...

  • Page 119

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 103 - 1671 Maximum allowable acceleration rate in acceleration/deceleration before interpolation for linear rapid traverse for each axis, or maximum allowable reference acceleration rate in optimum torque acceleration/deceleration [Input type] Parame...

  • Page 120

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 104 - 1672 Acceleration change time of bell-shaped acceleration/deceleration before interpolation for linear rapid traverse, or acceleration change time of bell-shaped acceleration/deceleration in optimum torque acceleration/deceleration [Input type]...

  • Page 121

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 105 - 1710 Minimum deceleration ratio (MDR) for inner circular cutting feedrate change by automatic corner override [Input type] Parameter input [Data type] Byte path [Unit of data] % [Valid data range] 0 to 100 Set a minimum deceleration ratio (M...

  • Page 122

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 106 - 1713 Start distance (Le) for inner corner override [Input type] Setting input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 digit ...

  • Page 123

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 107 - 1722 Rapid traverse feedrate reduction ratio for overlapping rapid traverse blocks [Input type] Parameter input [Data type] Byte axis [Unit of data] % [Valid data range] 0 to 100 This parameter is used when rapid traverse blocks are arranged ...

  • Page 124

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 108 - 1732 Minimum allowable feedrate for the deceleration function based on acceleration in circular interpolation [Input type] Parameter input [Data type] Real path [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data...

  • Page 125

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 109 - 1737 Maximum allowable acceleration rate for the deceleration function based on acceleration in AI contour control for each axis [Input type] Parameter input [Data type] Real axis [Unit of data] mm/sec2, inch/sec2, degree/sec2 (machine unit) ...

  • Page 126

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 110 - 1769 Time constant for acceleration/deceleration after cutting feed interpolation in the acceleration/deceleration before interpolation mode [Input type] Parameter input [Data type] Word axis [Unit of data] msec [Valid data range] 0 to 4000 ...

  • Page 127

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 111 - 1783 Maximum allowable feedrate difference for feedrate determination based on corner feedrate difference [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] De...

  • Page 128

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 112 - 1789 Maximum allowable acceleration change rate in feedrate determination based on acceleration change for each axis (linear interpolation) [Input type] Parameter input [Data type] Real axis [Unit of data] mm/sec2, inch/sec2, degree/sec2 (mac...

  • Page 129

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 113 - 1791 Acceleration rate on each axis for the outage-time deceleration stop function [Input type] Parameter input [Data type] Real axis [Unit of data] mm/sec2, inch/sec2, degree/sec2 (machine unit) [Minimum unit of data] Depend on the increment...

  • Page 130

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 114 - 4.16 PARAMETERS OF SERVO (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 1800 RBK FFR CVR [Input type] Parameter input [Data type] Bit path # 1 CVR When velocity control ready signal VRDY is set ON before position control ready signal PRDY comes...

  • Page 131

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 115 - # 5 CIN When CCI is set to 1, the dedicated parameter for specifying an in-position width for cutting feed is used: 0: Only when the next block specifies cutting feed. 1: Regardless of the next block. The table below indicates the relationship...

  • Page 132

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 116 - # 4 BKL15 When the direction of a movement is determined in backlash compensation: 0: The compensation amount is not considered. 1: The compensation amount (pitch error, straightness, external machine coordinate system shift, etc.) is conside...

  • Page 133

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 117 - # 5 ANA When an abnormal load is detected for an axis: 0: Movement along all axes is stopped, and a servo alarm is output. 1: No servo alarm is output, and movement along only the axes of the group containing the axis with the abnormal load is...

  • Page 134

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 118 - #7 #6 #5 #4 #3 #2 #1 #0 1814 ALGx [Input type] Parameter input [Data type] Bit axis # 7 ALGx The servo axis loop gain in the Cs contour control mode is: 0: Not matched with the Cs contour control loop gain. 1: Matched with the Cs ...

  • Page 135

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 119 - #7 #6 #5 #4 #3 #2 #1 #0 1815 RONxAPCxAPZxDCRxDCLx OPTx RVSx [Input type] Parameter input [Data type] Bit axis NOTE When at least one of these parameters is set, the powermust be turned off before operation is continued. # 0 RVSx Speci...

  • Page 136

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 120 - # 1 OPTx Position detector 0: A separate pulse coder is not used. 1: A separate pulse coder is used. NOTE Set this parameter to 1 when using a linear scale with reference marks or a linear scale with an absolute address zero point (full-clos...

  • Page 137

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 121 - # 6 RONx With a rotation axis A type, an absolute position detector (absolute pulse coder) using a scale without rotary data is: 0: Not used. 1: Used. NOTE 1 This parameter is available for only the rotary axis A type with an absolute positio...

  • Page 138

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 122 - #7 #6 #5 #4 #3 #2 #1 #0 1817 TANx SCPxSCRxSBLx [Input type] Parameter input [Data type] Bit axis NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 2 SBLx Smooth backla...

  • Page 139

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 123 - # 4 SCPx For two-point measurement (when bit 2 (DC2) of parameter No. 1802 is set to 1), the scale zero point direction is: 0: On the minus side. (The reference position is located in the plus direction when viewed from the scale zero point.) 1: O...

  • Page 140

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 124 - #7 #6 #5 #4 #3 #2 #1 #0 1818 SDC DG0 RF2x RFSx [Input type] Parameter input [Data type] Bit axis # 0 RFSx If G28 is specified for an axis for which a reference position is not established (ZRF = 0) when a linear scale with an absolut...

  • Page 141

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 125 - #7 #6 #5 #4 #3 #2 #1 #0 1819 NAHx DATx CRFx FUPx [Input type] Parameter input [Data type] Bit axis # 0 FUPx To perform follow-up when the servo is off is set for each axis. 0: The follow-up signal, *FLWU, determines whether follow-up ...

  • Page 142

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 126 - 1820 Command multiplier for each axis (CMR) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte axis [Valid data range] See below : Set a command multipl...

  • Page 143

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 127 - Least input increment Least command increment 0.000001 mm (diameter specification) 0.0000005 mm Millimeter input 0.000001 mm (radius specification) 0.000001 mm 0.0000001 inch (diameter specification) 0.0000005 mm Millimeter machine Inch input0.0...

  • Page 144

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 128 - As the size of the reference counter, specify the grid interval for the reference position return in the grid method. [Size of the reference counter]=[Grid interval]/[Detection unit] [Grid interval]=[Amount of travel per rotation of the pulse code...

  • Page 145

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 129 - 1822 Value of the numerator of arbitrary command multiplier n/m NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word axis [Valid data range] 0 to 9999 Set...

  • Page 146

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 130 - 1826 In-position width for each axis [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 99999999 The in-position width is set for each axis. When the deviation of the machine position f...

  • Page 147

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 131 - 1830 Axis-by-axis positional deviation limit at servo-off time [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 99999999 This parameter is used to set a positional deviation limit at ...

  • Page 148

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 132 - 1844 Distance to the first grid point when the reference position shift amount in the reference position shift function is 0 or when a reference position return is made by grid shift NOTE When this parameter is set, the power must be turned off...

  • Page 149

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 133 - 1846 Distance for starting the second stage of smooth backlash compensation [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 999999999 For each axis, set the distance from the point wh...

  • Page 150

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 134 - 1851 Backlash compensating value for each axis [Input type] Parameter input [Data type] Word axis [Unit of data] Detection unit [Valid data range] -9999 to 9999 Set the backlash compensating value for each axis. When the machine moves in a ...

  • Page 151

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 135 - 1868 Threshold position for converting scale data (each axis) [Input type] Parameter input [Data type] Real axis [Unit of data] degree (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data rang...

  • Page 152

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 136 - 1869 The amount of one rotation of rotary axis B type (each axis) [Input type] Parameter input [Data type] Real axis [Unit of data] degree (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data ...

  • Page 153

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 137 - 1874 Numerator of the flexible feed gear for the built-in position detector 1875 Denominator of the flexible feed gear for the built-in position detector NOTE When these parameters are set, the power must be turned off before operation is con...

  • Page 154

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 138 - 1881 Group number when an abnormal load is detected [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to 32 Set the group number on each axis when an abnormal load is detected. When an abnormal load is detected on an axi...

  • Page 155

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 139 - 1883 Distance 1 from the scale zero point to reference position (linear scale with absolute address reference marks) or distance 1 from the base point to reference position (linear scale with an absolute address zero point) NOTE When this param...

  • Page 156

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 140 - Mark 1 Mark 2 Mark 1 Mark 2 Zero point of encoder Encoder endReference position…….. Mark 1 = mark 2 41.8 8.242.08.0PRM.1821PRM.1882PRM.1884 × 1,000,000,000 + PRM.1883 [Example of parameter settings] When an encoder as shown below is used w...

  • Page 157

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 141 - <3> By jog feed or handle feed, place the machine at the accurate reference position. <4> In parameter No. 1883, set the machine coordinate of that time converted to the detection unit (machine coordinate × CMR). <5> If necessa...

  • Page 158

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 142 - NOTE 1 Set parameter Nos. 1883 and 1884 so that the distance from the scale zero point (for a linear scale with absolute address reference marks) or the base point (for a linear scale with an absolute address zero point) to the reference position ...

  • Page 159

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 143 - 1895 Servo motor axis number used for a milling tool [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to number of controlled axes This parameter sets the servo motor axis number used for displaying the speed of a milli...

  • Page 160

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 144 - #7 #6 #5 #4 #3 #2 #1 #0 1902 ASE FMD [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 0 FMD The FSSB setting mode is: 0...

  • Page 161

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 145 - # 6 PM1 The first separate detector interface unit is: 0: Not used. 1: Used. # 7 PM2 The second separate detector interface unit is: 0: Not used. 1: Used. NOTE When automatic setting mode is selected for FSSB setting (when the parameter...

  • Page 162

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 146 - Correspondence between connectors and connector numbers Connector Connector number JF107 6 JF108 7 Example of setting) Separate detector connection destination Parameter setting Controlled axis Connectors for 1st unit Connectors for 2nd unit Conn...

  • Page 163

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 147 - Parameters No.2000 to 2999 are for digital servo, The following parameters are not explained in this manual. Refer to FANUC AC SERVO MOTOR αi series PARAMETER MANUAL (B-65270EN) No. Data type Contents 2000 Bit axis PGEX DGPR PLC0 2001 Bit a...

  • Page 164

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 148 - No. Data type Contents 2055 Word axis Current dead-band compensation (PHYST) 2056 Word axis Variable current gain during deceleration 2057 Word axis Phase-D current at high speed 2058 Word axis Phase-D current limit at high speed 2060 Word axis To...

  • Page 165

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 149 - No. Data type Contents 2128 Word axis Weak magnetic flux compensation (coefficient) 2129 Word axis Weak magnetic flux compensation (base/limit) 2130 Word axis Two smooth compensations per magnetic pole pair 2131 Word axis Four smooth compensations...

  • Page 166

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 150 - No. Data type Contents 2319 Word axis Inertia ratio of disturbance elimination filter 2320 Word axis Inverse function gain of disturbance elimination filter 2321 Word axis Filter time constant of disturbance elimination filter 2322 Word axis Accel...

  • Page 167

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 151 - #7 #6 #5 #4 #3 #2 #1 #0 2008 VFA TNDM [Input type] Parameter input [Data type] Bit axis # 1 TDM This bit is automatically set to 1 when bit 6 (tandem axis) of parameter No. 1817 is set to 1. This bit cannot be directly set. #...

  • Page 168

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 152 - 2021 Load inertia ratio [Input type] Parameter input [Data type] Word axis [Valid data range] 0 to 32767 (Load inertia)/(motor inertia) × 256 For tandem control: (Load inertia)/(motor inertia) × 256/2 Set the same value for the master axis...

  • Page 169

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 153 - 2087 Preload value for each axis (Tcmd offset) [Input type] Parameter input [Data type] Word axis [Unit of data] (Ampere limit)/7282 [Valid data range] -1821 to 1821 An offset is applied to a torque command to suppress backlash. Set a value ...

  • Page 170

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 154 - [When spindle control with servo motor is used] Functions used when Normal position control is uded Permissible rotation speed Extended permissible feedrate Feedrate limit multiplied by 10 Detection unit:1/1000deg Detection unit:1/10000deg Detecti...

  • Page 171

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 155 - 4.17 PARAMETERS OF DI/DO (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 3001 MHI PGS RWM SON [Input type] Parameter input [Data type] Bit path # 1 SON Automatic operation is started: 0: On the falling edge ("1" → "0") of ...

  • Page 172

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 156 - #7 #6 #5 #4 #3 #2 #1 #0 3002 OVM POV IOV MFD [Input type] Parameter input [Data type] Bit path # 2 MFD When the high-speed M/S/T/B interface is used, if a block specifying an M, S, T, or B code does not contain a move command or d...

  • Page 173

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 157 - #7 #6 #5 #4 #3 #2 #1 #0 DEC DAU DIT ITX ITL 3003 DEC DIT ITX ITL [Input type] Parameter input [Data type] Bit path # 0 ITL Interlock signal for all axes 0: Enabled 1: Disabled # 2 ITX Interlock signals for each axis 0: Ena...

  • Page 174

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 158 - # 5 OTH The overtravel limit signal is: 0: Checked 1: Not checked WARNING For safety, usually set 0 to check the overtravel limit signal. #7 #6 #5 #4 #3 #2 #1 #0 3006 WPS EP2 EPS EPN GDC [Input type] Parameter input [Data type] B...

  • Page 175

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 159 - #7 #6 #5 #4 #3 #2 #1 #0 3008 XSG [Input type] Parameter input [Data type] Bit path NOTE When this parameter is set, the power must be turned off before operation is continued. # 2 XSG A signal assigned to an X address is: 0: F...

  • Page 176

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 160 - 3010 Time lag in strobe signals MF, SF, TF, and BF [Input type] Parameter input [Data type] Word path [Unit of data] msec [Valid data range] 0 to 32767 The time required to send strobe signals MF, SF, TF, and BF after the M, S, T, and B cod...

  • Page 177

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 161 - 3011 Acceptable width of M, S, T, and B function completion signal (FIN) [Input type] Parameter input [Data type] Word path [Unit of data] msec [Valid data range] 0 to 32767 Set the minimum signal width of the valid M, S, T, and B function ...

  • Page 178

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 162 - 3013 X address to which the deceleration signal for reference position return is assigned NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word axis [Vali...

  • Page 179

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 163 - 3018 Percentage assumed when the 1% rapid traverse override signal indicates 0% during execution of an auxiliary function [Input type] Parameter input [Data type] Byte path [Unit of data] % [Valid data range] 0 to 100 When the 1% rapid trav...

  • Page 180

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 164 - Example 2. When No.3012 is set to 5 and No.3019 is set to 5 When XSG (bit 2 of parameter No. 3008) is 1, the PMC axis control skip signal, measurement position arrival signal, and skip signal are allocated to X0005. #7 #6 #5 #4 #3 #2 #1 #0 X0...

  • Page 181

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 165 - 3021 Address to which an axis signal is assigned NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to 7, 10 to 17, 20 to 27,...

  • Page 182

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 166 - 3022 Address to which a spindle signal is assigned NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte spindle [Valid data range] 0to3,10to13,20to23, .....

  • Page 183

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 167 - 3030 Allowable number of digits for the M code 3031 Allowable number of digits for the S code 3032 Allowable number of digits for the T code [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to 8 Set the allowable n...

  • Page 184

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 168 - 4.18 PARAMETERS OF DISPLAY AND EDIT (1 OF 5) #7 #6 #5 #4 #3 #2 #1 #0 3100 CEM [Input type] Parameter input [Data type] Bit # 1 CEM On the help and operation history screens, CE-marked MDI keys are displayed with: 0: Key names. ...

  • Page 185

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 169 - # 3 PPD Relative position display when a coordinate system is set 0: Not preset 1: Preset NOTE If any of the following is executed when PPD is set to 1, the relative position display is preset to the same value as the absolute position disp...

  • Page 186

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 170 - #7 #6 #5 #4 #3 #2 #1 #0 3105 DPS PCF DPF [Input type] Parameter input [Data type] Bit path # 0 DPF The actual speed is: 0: Not displayed 1: Displayed # 1 PCF Addition of the movement of the PMC-controlled axes to the actual s...

  • Page 187

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 171 - #7 #6 #5 #4 #3 #2 #1 #0 3107 SOR [Input type] Setting input [Data type] Bit path # 4 SOR Display of the program directory 0: Programs are listed in the order of registration. 1: Programs are listed in the order of name. #7 #6...

  • Page 188

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 172 - #7 #6 #5 #4 #3 #2 #1 #0 3109 IKY DWT [Input type] Parameter input [Data type] Bit path # 1 DWT Characters G and W in the display of tool wear/geometry compensation amount 0: The characters are displayed at the left of each number...

  • Page 189

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 173 - # 7 NPA Action taken when an alarm is generated or when an operator message is entered 0: The display shifts to the alarm or message screen. 1: The display does not shift to the alarm or message screen. NOTE When MANUAL GUIDE i is provided,...

  • Page 190

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 174 - # 5 DCL The touch panel compensation screen is: 0: Disabled. 1: Enabled. Set this parameter to 0 usually. Touch panel compensation becomes necessary only when the panel is replaced or memory all clear operation is performed. Set this paramete...

  • Page 191

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 175 - # 6 ICU When the function key is pressed while the custom screen is being displayed: 0: The screen is changed. 1: The screen is not changed. #7 #6 #5 #4 #3 #2 #1 #0 3115 APLxPGA NDFx NDAx NDPx [Input type] Parameter input [Data type...

  • Page 192

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 176 - # 5 APLx When the active offset value modification mode based on manual feed is selected, the relative position display is automatically: 0: Not preset. 1: Preset. Use this parameter when returning a modified offset value to the original valu...

  • Page 193

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 177 - #7 #6 #5 #4 #3 #2 #1 #0 3117 SPP [Input type] Parameter input [Data type] Bit path # 1 SPP When a serial spindle is used, the position coder signal pulse data based on the one-rotation signal is: 0: Not displayed on diagnosis sc...

  • Page 194

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 178 - # 3 TPA When the option for the external touch panel interface is selected, the external touch panel interface connection is: 0: Valid. 1: Invalid. For an external touch panel (called ETP hereinafter), the RS-232C serial port 2 ((JD36A or JD...

  • Page 195

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 179 - #7 #6 #5 #4 #3 #2 #1 #0 3124 D08 D07 D06 D05 D04 D03 D02 D01 #7 #6 #5 #4 #3 #2 #1 #0 3125 D16 D15 D14 D13 D12 D11 D10 D09 #7 #6 #5 #4 #3 #2 #1 #0 3126 D24 D23 D22 D21 D20 D19 D18 D17 #7 #6 #5 #4 #3 #2 #1 #0 3127 D32 D31 D30 D29 D28...

  • Page 196

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 180 - #7 #6 #5 #4 #3 #2 #1 #0 MRE DAP DRP 3129 MRE [Input type] Parameter input [Data type] Bit path # 0 DRP For relative coordinate display: 0: The actual position considering a tool offset (tool movement) is displayed. 1: The ...

  • Page 197

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 181 - 3131 Subscript of axis name [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to 9, 65 to 90 In order to distinguish axes under parallel operation, synchronization control, and tandem control, specify a subscript for ea...

  • Page 198

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 182 - 3133 Axis name (relative coordinate) for current position display [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to 255 These parameters set the axis name for current position display. When G code system B or C is us...

  • Page 199

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 183 - 3141 Path name (1st character) 3142 Path name (2nd character) 3143 Path name (3rd character) 3144 Path name (4th character) 3145 Path name (5th character) 3146 Path name (6th character) 3147 Path name (7th character) [Input type] P...

  • Page 200

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 184 - 3160 Setting of MDI unit type [Input type] Parameter input [Data type] Byte [Valid data range] 0 to 4 Set the type of an MDI unit when the type of an MDI unit is not automatically identified. Setting value Type 0 Depends on the system type ...

  • Page 201

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 185 - #7 #6 #5 #4 #3 #2 #1 #0 3192 PLD TRA T2P [Input type] Parameter input [Data type] Bit # 1 T2P When more than one point is pressed on the touch panel: 0: The position at the center of gravity is obtained. 1: The point pressed first...

  • Page 202

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 186 - # 3 DPM The machine coordinates during diameter/radius specification switching are displayed: 0: According to the setting of bit 3 (DIAx) of parameter No. 1006. 1: According to the specification during switching. #7 #6 #5 #4 #3 #2 #1 #0 31...

  • Page 203

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 187 - # 7 HAL When an alarm is issued, additional information (modal data, absolute coordinates, and machine coordinates present at the issuance of the alarm) is: 0: Recorded in the operation history and alarm history. 1: Not recorded in the operat...

  • Page 204

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 188 - # 2 REP Action in response to an attempt to register a program whose number is the same as that of an existing program 0: An alarm is generated. 1: The existing program is deleted, then the new program is registered. Note that if the existing...

  • Page 205

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 189 - # 4 NE9 Editing of subprograms with program numbers 9000 to 9999 0: Not inhibited 1: Inhibited When this parameter is set to 1, the following editing operations are disabled: (1) Program deletion (Even when deletion of all programs is specifi...

  • Page 206

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 190 - #7 #6 #5 #4 #3 #2 #1 #0 3204 MKP PAR [Input type] Parameter input [Data type] Bit path # 0 PAR When a small MDI unit is used, characters "[" and "]" are: 0: Used as "[" and "]". 1: Used as...

  • Page 207

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 191 - # 7 NS2 CNC screen dual display function is: 0: Disabled. 1: Enabled. #7 #6 #5 #4 #3 #2 #1 #0 3207 TPP VRN EXS [Input type] Parameter input [Data type] Bit # 1 EXS Soft key expansion of the machine menu function is: 0: Disabl...

  • Page 208

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 192 - 3210 Program protection (PSW) [Input type] Parameter input [Data type] 2-word [Valid data range] 0 to 99999999 This parameter sets a password for protecting program Nos. 9000 to 9999. When a value other than zero is set in this parameter and...

  • Page 209

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 193 - 3216 Increment in sequence numbers inserted automatically [Input type] Setting input [Data type] 2-word path [Valid data range] 0 to 99999999 Set the increment for sequence numbers for automatic sequence number insertion (when bit 5 (SEQ) of...

  • Page 210

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 194 - 3222 Program protection range (minimum value) (PMIN) 3223 Program protection range (maximum value) (PMAX) [Input type] Locked parameter [Data type] 2-word [Valid data range] 0 to 99999999 The programs in a range set here can be locked. Set...

  • Page 211

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 195 - 3227 Selection of a block number of machine operation menu data (horizontal soft keys) 3228 Selection of a block number of machine operation menu data (vertical soft keys) [Input type] Parameter input [Data type] Byte [Valid data range] 0 ...

  • Page 212

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 196 - 3241 Character blinking in the AI contour control I mode (first character) 3242 Character blinking in the AI contour control I mode (second character) 3243 Character blinking in the AI contour control I mode (third character) 3244 Characte...

  • Page 213

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 197 - #7 #6 #5 #4 #3 #2 #1 #0 3280 NLC [Input type] Parameter input [Data type] Bit # 0 NLC Dynamic display language switching is: 0: Enabled. 1: Disabled. When dynamic display language switching is disabled, the language setting scre...

  • Page 214

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 198 - #7 #6 #5 #4 #3 #2 #1 #0 3282 SPN HGL ITA CHS CHT FRE GER JPN #7 #6 #5 #4 #3 #2 #1 #0 3283 RUS CZE SWE HUN POL POR DAN DTH #7 #6 #5 #4 #3 #2 #1 #0 3284 TRK NOTE 1 When at least one of these parameters is set, the power must be ...

  • Page 215

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 199 - #7 #6 #5 #4 #3 #2 #1 #0 KEY MCMGO2 IWZ WZO GOF WOF3290 KEY MCM IWZ WZO GOF WOF [Input type] Parameter input [Data type] Bit path # 0 WOF Setting the tool offset value (tool wear offset) by MDI key input is: 0: Not disabled. 1: Disabled...

  • Page 216

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 200 - # 7 KEY For memory protection keys: 0: The KEY1, KEY2, KEY3, and KEY4 signals are used. 1: Only the KEY1 signal is used. NOTE 1 The functions of the signals depend on whether KEY=0 or KEY=1. When KEY = 0: - KEY1: Enables a tool offset value...

  • Page 217

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 201 - 3294 Start number of tool offset values whose input by MDI is disabled 3295 Number of tool offset values (from the start number) whose input by MDI is disabled [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 999 ...

  • Page 218

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 202 - #7 #6 #5 #4 #3 #2 #1 #0 3299 PKY [Input type] Setting input [Data type] Bit # 0 PKY "Parameter write enable" is: 0: Set on the setting screen (bit 0 (PWE) of setting parameter No.8900). 1: Set by the memory protection ...

  • Page 219

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 203 - (1) CNC operation screens Screen No. Screen name Screen No.Screen name 99 Display of next page(*1) 143 Spindle setting 100 Absolute position display(*2) 144 Spindle adjustment 101 Relative position display(*2) 145 Spindle monitor 102 Overall pos...

  • Page 220

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 204 - (2) PMC operation screens (3) Communication operation screens Screen No. Screen name Screen No.Screen name 200 PMC signal status Ethernet setting 201 PMC IO link 300 [Built-in port] Common 202 PMC alarm 301 [Built-in port] FOCAS2/...

  • Page 221

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 205 - 4.19 PARAMETERS OF PROGRAMS (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 3400 SMX PGD MGC MGO [Input type] Parameter input [Data type] Bit path # 0 MGO If the program restart M/S/T/B code output function is used: 0: When bit 6 (MOA) of paramet...

  • Page 222

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 206 - # 6 SMX An S code specified in a block that specifies G92 (G50 with G code system A of the T series) is: 0: Regarded as a maximum spindle speed command. 1: Not regarded as a maximum spindle speed command (but regarded as a spindle speed comma...

  • Page 223

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 207 - # 6 GSB The G code system is set. # 7 GSC GSC GSB G code 0 0 G code system A 0 1 G code system B 1 0 G code system C NOTE G code system B and G code system C are optional functions. When no option is selected, G code system A is used, ...

  • Page 224

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 208 - # 6 CLR Reset button on the MDI panel, external reset signal, reset and rewind signal, and emergency stop signal 0: Cause reset state. 1: Cause clear state. For the reset and clear states, refer to Appendix in the User's Manual. # 7 G23 ...

  • Page 225

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 209 - # 4 M30 When M30 is specified in a memory operation: 0: M30 is sent to the machine, and the head of the program is automatically searched for. So, when the ready signal FIN is returned and a reset or reset and rewind operation is not performe...

  • Page 226

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 210 - # 1 DWL The dwell time (G04) is: 0: Always dwell per second. 1: Dwell per second in the feed per minute mode (G94), or dwell per rotation in the feed per rotation mode (G95). # 3 G36 As a G code to be used with the automatic tool length...

  • Page 227

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 211 - #7 #6 #5 #4 #3 #2 #1 #0 3406 C07 C06 C05 C04 C03 C02 C01 #7 #6 #5 #4 #3 #2 #1 #0 3407 C15 C14 C13 C12 C11 C10 C09 C08 #7 #6 #5 #4 #3 #2 #1 #0 3408 C23 C22 C21 C20 C19 C18 C17 C16 #7 #6 #5 #4 #3 #2 #1 #0 3409 CFH C30 C29 C28 C27 C2...

  • Page 228

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 212 - 3410 Tolerance of arc radius [Input type] Setting input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 0 or positive 9 digit of mini...

  • Page 229

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 213 - 3421 Range specification 1 of M codes that do not perform buffering (lower limit) 3422 Range specification 1 of M codes that do not perform buffering (upper limit) 3423 Range specification 2 of M codes that do not perform buffering (lower limi...

  • Page 230

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 214 - 3436 Range specification 1 of second auxiliary function codes that do not perform buffering (lower limit) 3437 Range specification 1 of second auxiliary function codes that do not perform buffering (upper limit) 3438 Range specification 2 of...

  • Page 231

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 215 - #7 #6 #5 #4 #3 #2 #1 #0 3450 BDX AUP [Input type] Parameter input [Data type] Bit path # 0 AUP The second auxiliary function specified in the calculator-type decimal point input format, with a decimal point, or with a negative va...

  • Page 232

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 216 - #7 #6 #5 #4 #3 #2 #1 #0 NBN 3451 NBN GQS [Input type] Parameter input [Data type] Bit path # 0 GQS When threading is specified, the threading start angle shift function (Q) is: 0: Disabled. 1: Enabled. # 4 NBN If bit...

  • Page 233

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 217 - #7 #6 #5 #4 #3 #2 #1 #0 CRD 3453 [Input type] Setting input [Data type] Bit path # 0 CRD If the functions of chamfering or corner R and direct drawing dimension programming are both enabled, 0: Chamfering or corner R is...

  • Page 234

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 218 - #7 #6 #5 #4 #3 #2 #1 #0 3455 AXDx [Input type] Parameter input [Data type] Bit axis # 0 AXDx If a decimal point is omitted for an axis address with which a decimal point can be used, the value is determined: 0: In accordance with...

  • Page 235

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 219 - # 1 MC2 MTB dedicated directory 2 "//CNC_MEM/MTB2/" of the initial directories is: 0: Set as a search directory. 1: Not set as a search directory. # 2 MC1 MTB dedicated directory 1 "//CNC_MEM/MTB1/" of the initial di...

  • Page 236

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 220 - # 7 SCF A search folder is: 0: Not added. 1: Added. When a search folder is added, a search is made in the following order: 0) Folder only for embedded macro (With the embedded macro-function.) 1) Folder where the main program is stored 2) C...

  • Page 237

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 221 - 3472 Minimum radius needed to maintain the actual speed in spiral or conic interpolation [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the re...

  • Page 238

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 222 - 4.20 PARAMETERS OF PITCH ERROR COMPENSATION #7 #6 #5 #4 #3 #2 #1 #0 3601 EPC [Input type] Parameter input [Data type] Bit path NOTE When this parameter is set, the power must be turned off before operation is continued. # 1 E...

  • Page 239

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 223 - # 1 IPPx Interpolation type pitch error compensation is: 0: Not used. 1: Used. In interpolation type pitch error compensation, a compensation value at each point in each error completion point interval is divided for output of one pulse at eq...

  • Page 240

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 224 - 3621 Number of the pitch error compensation position at extremely negative position for each axis NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word axi...

  • Page 241

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 225 - 3624 Interval between pitch error compensation positions for each axis NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inch,...

  • Page 242

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 226 - 3626 Number of the both-direction pitch error compensation position at extremely negative position (for movement in the negative direction) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input ...

  • Page 243

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 227 - 3661 Number of a pitch error compensation position for the reference position for each slave axis when independent pitch error compensation is performed under simple spindle synchronous control NOTE When this parameter is set, the power must b...

  • Page 244

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 228 - 3671 Number of the pitch error compensation position at extremely positive position for each slave axis when independent pitch error compensation is performed under simple spindle synchronous control NOTE When this parameter is set, the power...

  • Page 245

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 229 - 3676 Number of the pitch error compensation position at extremely negative position for each slave axis when independent both-direction pitch error compensation is performed under simple spindle synchronous control NOTE When this parameter is ...

  • Page 246

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 230 - 4.21 PARAMETERS OF SPINDLE CONTROL #7 #6 #5 #4 #3 #2 #1 #0 3700 NRF CRF [Input type] Parameter input [Data type] Bit path # 0 CRF Reference position setting at an arbitrary position under Cs contour control is: 0: Not used. 1: U...

  • Page 247

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 231 - #7 #6 #5 #4 #3 #2 #1 #0 3703 SPR MPP MPM 2P2 [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 0 2P2 When a multi-path sy...

  • Page 248

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 232 - #7 #6 #5 #4 #3 #2 #1 #0 3704 CSS SSY SSS [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 4 SSS Synchronous spindl...

  • Page 249

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 233 - #7 #6 #5 #4 #3 #2 #1 #0 SFA EVS SGT SGB ESF 3705 SFA NSF SGT SGB GST ESF [Input type] Parameter input [Data type] Bit path # 0 ESF When the spindle control function (Spindle analog output or Spindle serial output) is used, and th...

  • Page 250

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 234 - # 4 EVS When the spindle control function (Spindle analog output or Spindle serial output) is used, S codes and SF are: 0: Not output for an S command. 1: Output for an S command. The output of S codes and SF for an S command in constant su...

  • Page 251

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 235 - # 3 PCS When a multi-path system is used, and multi-spindle control is enabled with each path, as the position coder signals (PC2SLC<Gn028.7>, PC3SLC<Gn026.0>, PC4SLC<Gn026.1>) for selecting the position coder of a spindle a...

  • Page 252

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 236 - # 4 GTT Selection of a spindle gear selection method 0: Type M. 1: Type T. NOTE 1 M type The gear selection signal is not input. The CNC selects a gear based on the speed range of each gear set by a parameter beforehand according to S code...

  • Page 253

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 237 - #7 #6 #5 #4 #3 #2 #1 #0 TSO SOC SAT SAR 3708 TSO SOC SAR [Input type] Parameter input [Data type] Bit path # 0 SAR The spindle speed arrival signal (SAR) is: 0: Not checked 1: Checked # 1 SAT Check of the spindle speed a...

  • Page 254

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 238 - #7 #6 #5 #4 #3 #2 #1 #0 3709 MRS MSI RSC SAM [Input type] Parameter input [Data type] Bit path # 0 SAM The sampling frequency to obtain the average spindle speed 0: 4 (Normally, set to 0.) 1: 1 # 1 RSC In the constant surface ...

  • Page 255

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 239 - #7 #6 #5 #4 #3 #2 #1 #0 3713 MPC EOV MSC [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 3 MSC Multi-spindle control T...

  • Page 256

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 240 - #7 #6 #5 #4 #3 #2 #1 #0 3715 NSAx [Input type] Parameter input [Data type] Bit axis # 0 NSAx When a move command is executed for an axis, the spindle speed arrival signal SAR is: 0: Checked. 1: Not checked. Set an axis for which ...

  • Page 257

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 241 - 3717 Motor number to each spindle NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte spindle [Valid data range] 0 to Maximum number of controlled axes ...

  • Page 258

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 242 - 3721 Number of gear teeth on the position coder side [Input type] Parameter input [Data type] Word spindle [Valid data range] 0 to 9999 Set the number of gear teeth on the position coder side in speed control (such as feed per revolution and...

  • Page 259

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 243 - # 3 NCSs When the Cs contour control mode is set: 0: Switching to Cs contour control is completed when the spindle activating current is on (the spindle amplifier is ready for operation in the Cs contour control mode). 1: Switching to Cs cont...

  • Page 260

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 244 - 3731 Compensation value for the offset voltage of spindle speed analog output [Input type] Parameter input [Data type] Word spindle [Unit of data] Velo [Valid data range] -1024 to 1024 Set a compensation value for the offset voltage of spind...

  • Page 261

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 245 - 3735 Minimum clamp speed of the spindle motor [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 4095 Set the minimum clamp speed of the spindle motor. Setting value = (Minimum clamp speed of the spindle motor / Ma...

  • Page 262

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 246 - 3738 Spindle name 2 of each spindle 3739 Spindle name 3 of each spindle [Input type] Parameter input [Data type] Byte spindle [Valid data range] 48 to 57, 65 to 90 The command for a spindle is basically "S". When all conditions b...

  • Page 263

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 247 - 3741 Maximum spindle speed for gear 1 3742 Maximum spindle speed for gear 2 3743 Maximum spindle speed for gear 3 3744 Maximum spindle speed for gear 4 [Input type] Parameter input [Data type] 2-word spindle [Unit of data] min-1 [Vali...

  • Page 264

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 248 - 3751 Spindle motor speed when switching from gear 1 to gear 2 3752 Spindle motor speed when switching from gear 2 to gear 3 [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 4095 For gear switching method B, se...

  • Page 265

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 249 - 3761 Spindle speed when switching from gear 1 to gear 2 during tapping 3762 Spindle speed when switching from gear 2 to gear 3 during tapping [Input type] Parameter input [Data type] 2-word path [Unit of data] min-1 [Valid data range]...

  • Page 266

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 250 - 3770 Axis as the calculation reference in constant surface speed control [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Number of controlled axes Set the axis as the calculation reference in constant surface speed...

  • Page 267

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 251 - 3775 Default P command value for spindle selection in multi-spindle control NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word path [Valid data range]...

  • Page 268

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 252 - #7 #6 #5 #4 #3 #2 #1 #0 3798 ESN ALM [Input type] Parameter input [Data type] Bit # 0 ALM The spindle alarm (SP****) for all spindles is: 0: Enabled. 1: Ignored. When this parameter is set to 1, the spindle-related alarms are ign...

  • Page 269

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 253 - # 1 NDPs When an analog spindle is used, a position coder disconnection check is: 0: Made. 1: Not made. (This parameter is valid when bit 0 (NAL) of parameter No. 3799 is set to 0.) When no position coder is used with an analog spindle, set t...

  • Page 270

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 254 - Number Data format Description 3920 3921 3922 3923 3924 Byte path Word path Word path Word path Word path Third group Number of the servo axis whose loop gain is to be changed according to the set values of parameters 3921 to 3924 when ...

  • Page 271

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 255 - NOTE 1 In general, it is difficult to set a high loop gain for a spindle motor axis when compared with a servo axis. These parameters are provided so that, by changing the loop gain of a servo axis that requires interpolation with the Cs contour ...

  • Page 272

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 256 - Parameters for Serial interface spindle or spindle Parameters Nos. 4000 to 4799 below are basically used with the serial spindle amplifier. For details of these parameters, refer to either of the following manuals and other related documents, dep...

  • Page 273

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 257 - 4196 to to 4309 [Input type] Parameter input [Data type] Word spindle 4310 4311 [Input type] Parameter input [Data type] 2-word spindle 4312 to to 4351 [Input type] Parameter input [Data type] Word spindle #7 #6 #5 #4 #3...

  • Page 274

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 258 - #7 #6 #5 #4 #3 #2 #1 #0 4394 to to 4403 [Input type] Parameter input [Data type] Bit spindle 4404 to to 4466 [Input type] Parameter input [Data type] Word spindle #7 #6 #5 #4 #3 #2 #1 #0 4467 to to 447...

  • Page 275

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 259 - 4680 to to 4799 [Input type] Parameter input [Data type] Word spindle NOTE 1 Among the parameters of the spindle amplifier with the serial interface, parameters Nos. 4015 and 4191 cannot be changed by the users. These parameters require ...

  • Page 276

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 260 - NOTE 4 The CNC can control up to eight spindle amplifiers with the serial interface. When the spindle amplifier provides the spindle switching function, one spindle amplifier can control two spindle motors using the switching function. The output...

  • Page 277

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 261 - #7 #6 #5 #4 #3 #2 #1 #0 4800 SPK EPZ SCB [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 5 SCB The combination of a ma...

  • Page 278

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 262 - # 7 SPK As the parking signals for simple spindle synchronous control: 0: PKESS1<Gn122.6> (first spindle) and PKESS2<Gn122.7> (second spindle) are used. 1: PKESS1<Gn031.6> (first spindle) and PKESS2<Gn031.7> (second sp...

  • Page 279

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 263 - 4811 Allowable error count for the error pulses between two spindles in the spindle synchronization control mode [Input type] Parameter input [Data type] Word spindle [Unit of data] Detection unit [Valid data range] 0 to 32767 Set the allow...

  • Page 280

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 264 - 4821 Master axis of each slave spindle under simple synchronous spindle control NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte spindle [Valid data r...

  • Page 281

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 265 - 4826 Allowable error count for the error pulses between two spindles in the simple synchronization spindle control mode [Input type] Parameter input [Data type] Word spindle [Unit of data] Detection unit [Valid data range] 0 to 32767 Set th...

  • Page 282

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 266 - 4831 Master axis of each slave spindle under spindle synchronous control NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte spindle [Valid data range] ...

  • Page 283

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 267 - 4832 Master spindle of each slave spindle under spindle synchronization control (spindle number common to the system) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input ...

  • Page 284

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 268 - 4911 Allowable speed ratio (q) used to assume that the spindle has reached a specified speed [Input type] Parameter input [Data type] Word spindle [Unit of data] 1%, 0.1% [Valid data range] 1 to 100, 1 to 1000 When the spindle speed fluctua...

  • Page 285

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 269 - 4914 Time (p) from the change of a specified speed until spindle speed fluctuation detection is started [Input type] Parameter input [Data type] 2-word spindle [Unit of data] msec [Valid data range] 0 to 999999 When the spindle speed fluctu...

  • Page 286

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 270 - # 7 IMBs When the spindle positioning function is used, half-fixed angle positioning based on M codes uses: 0: Specification A 1: Specification B In the case of half-fixed angle positioning based on M codes, three types of spindle positioning...

  • Page 287

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 271 - 4960 M code specifying the spindle orientation [Input type] Parameter input [Data type] 2-word spindle [Valid data range] 6 to 97 Set an M code for switching to the spindle positioning mode. NOTE 1 Do not set an M code that duplicates other...

  • Page 288

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 272 - 4962 M code for specifying a spindle positioning angle [Input type] Parameter input [Data type] 2-word spindle [Valid data range] 6 to 9999999 Two methods are available for specifying spindle positioning. One method uses axis address for arb...

  • Page 289

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 273 - 4964 Number of M codes for specifying a spindle positioning angle [Input type] Parameter input [Data type] 2-word spindle [Valid data range] 0 to 255 This parameter sets the number of M codes used for Half-fixed angle positioning using M co...

  • Page 290

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 274 - 4971 Position gain multiplier (first stage) 4972 Position gain multiplier (second stage) 4973 Position gain multiplier (third stage) 4974 Position gain multiplier (fourth stage) [Input type] Parameter input [Data type] Word spindle ...

  • Page 291

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 275 - 4.22 PARAMETERS OF TOOL COMPENSATION (1 OF 3) #7 #6 #5 #4 #3 #2 #1 #0 5000 ASG MOF SBK [Input type] Setting input [Data type] Bit path # 0 SBK With a block created internally for cutter compensation or tool nose radius compensati...

  • Page 292

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 276 - # 4 ASG When tool compensation memory B/C (M series) or the tool geometry/wear compensation function (T series) is valid, the compensation amount to be modified by the active offset value change mode based on manual feed is: 0: Geometry compe...

  • Page 293

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 277 - #7 #6 #5 #4 #3 #2 #1 #0 WNPLWMLGC LGT LWT LGN 5002 [Input type] Parameter input [Data type] Bit path # 1 LGN Geometry offset number of tool offset 0: Is the same as wear offset number 1: Specifies the geometry offset numbe...

  • Page 294

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 278 - # 7 WNP Imaginary tool tip number used for tool nose radius compensation, when the geometry/wear compensation function is equipped, is the number specified by: 0: Geometry offset number 1: Wear offset number #7 #6 #5 #4 #3 #2 #1 #0 TGC L...

  • Page 295

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 279 - # 6 LVK Tool length compensation vector 0: Cleared by reset 1: Not cleared, but held by reset The tool length compensation vector in the tool axis direction is handled in the same way by this bit. # 7 TGC A tool geometry offset based on...

  • Page 296

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 280 - #7 #6 #5 #4 #3 #2 #1 #0 QNI PRC CNI 5005 QNI [Input type] Parameter input [Data type] Bit path # 0 CNI On the offset screen, Y-axis offset screen, and macro screen, the [INP.C] soft key is: 0: Used. 1: Not used. (The [INP....

  • Page 297

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 281 - # 6 TOS Set a tool length compensation operation. 0: Tool length compensation is performed by an axis movement. 1: Tool length compensation is performed by shifting the coordinate system. #7 #6 #5 #4 #3 #2 #1 #0 3OF 3OC 5007 3OF 3O...

  • Page 298

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 282 - # 7 3OF If three-dimensional coordinate conversion is not nested with a command for tool length compensation, or if three-dimensional coordinate conversion is specified during tool length compensation and another command for tool length compe...

  • Page 299

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 283 - #7 #6 #5 #4 #3 #2 #1 #0 5008 MCR CNV CNC [Input type] Parameter input [Data type] Bit path # 1 CNC # 3 CNV These bits are used to select an interference check method in the cutter compensation or tool nose radius compensation...

  • Page 300

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 284 - # 4 TSD In the function for direct input of offset value measured B, the movement direction determination specifications: 0: Do not apply. 1: Apply. This parameter is valid when four-contact input is used (bit 3 (TS1) of parameter No. 5004 is...

  • Page 301

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 285 - 5011 Constant denominator for three-dimensional tool compensation or tool length compensation in a specified direction [Input type] Setting input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on t...

  • Page 302

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 286 - 5013 Maximum value of tool wear compensation [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (offset unit) [Minimum unit of data] The increment system of a tool offset value is followed. [Valid data range] The se...

  • Page 303

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 287 - 5014 Maximum value of incremental input for tool wear compensation [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (offset unit) [Minimum unit of data] The increment system of a tool offset value is followed. [Va...

  • Page 304

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 288 - 5015 Distance to X-axis + contact surface of touch sensor 1 (X1P) 5016 Distance to X-axis - contact surface of touch sensor 1 (X1M) 5017 Distance to Z-axis + contact surface of touch sensor 1 (Z1P) 5018 Distance to Z-axis - contact surface...

  • Page 305

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 289 - Z-axis − contact surface →← Z-axis + contact surface ↑X-axis + contact surfaceX-axis − contact surface↓Measuremenet reference position X2p +X Z2p+Z Z2mX2m 5020 Tool offset number used with the function for direct input of offset v...

  • Page 306

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 290 - 5022 Distance (L) from reference tool tip position to the reference measurement surface [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inch (machine unit) [Minimum unit of data] Depend on the increment system of the...

  • Page 307

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 291 - 5024 Number of tool compensation values NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 999 Set the maximum allowable n...

  • Page 308

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 292 - NOTE A value longer than the setting of parameter No. 3032 (allowable number of digits of a T code) cannot be set. 5029 Number of tool compensation value memories common to paths NOTE When this parameter is set, the power must be turned off...

  • Page 309

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 293 - 5032 Direction of tool offset B [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 7 Specify the offset direction of tool offset B (G43, G44). Y X10765432When G43 is specified5432 1076 When G44 is spec...

  • Page 310

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 294 - #7 #6 #5 #4 #3 #2 #1 #0 TLG TCT MOF OWD5040 MOF [Input type] Parameter input [Data type] Bit path # 0 OWD In radius programming (bit 1 (ORC) of parameter No. 5004 is set to 1), 0: Tool offset values of both geometry compens...

  • Page 311

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 295 - #7 #6 #5 #4 #3 #2 #1 #0 AON ATP ACR 5041 AON ACR [Input type] Parameter input [Data type] Bit path # 0 ACR When the active offset value modification mode based on manual feed is selected in the reset state or cleared state,...

  • Page 312

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 296 - # 6 AON When the tool compensation value (tool length compensation value used with tool length compensation A/B in the case of the M series) is changed in the active offset value modification mode: 0: In the case of the M series, the change ...

  • Page 313

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 297 - Axis number for which Y-axis offset is used 5043 [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 24 Set the number of an axis for which the tool offset is corrected. If 0 or a value beyond the valid data range i...

  • Page 314

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 298 - #7 #6 #5 #4 #3 #2 #1 #0 5051 2AT 2NR [Input type] Parameter input [Data type] Bit path # 0 2NR When the direct input of offset value measured B for 2 spindle lathe is used: 0: One touch sensor is used. 1: Two touch sensors are u...

  • Page 315

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 299 - 5054 Workpiece coordinate system memory for spindle 1 5055 Workpiece coordinate system memory for spindle 2 [Input type] Parameter input [Data type] Byte path [Valid data range] 54 to 59 Specify a workpiece coordinate system from G54 to G5...

  • Page 316

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 300 - 5081 1st-axis coordinate value of compensation center 1 in grinding-wheel wear compensation 5082 2nd-axis coordinate value of compensation center 1 in grinding-wheel wear compensation 5083 1st-axis coordinate value of compensation cent...

  • Page 317

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 301 - 4.23 PARAMETERS OF CANNED CYCLES 4.23.1 Parameters of Canned Cycle for Drilling (1 of 2) #7 #6 #5 #4 #3 #2 #1 #0 RTR EXC FXY 5101 M5B EXC FXY [Input type] Parameter input [Data type] Bit path # 0 FXY The drilling axis in t...

  • Page 318

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 302 - #7 #6 #5 #4 #3 #2 #1 #0 RDI RAB F16 QSR 5102 QSR [Input type] Parameter input [Data type] Bit path # 2 QSR Before a multiple repetitive canned cycle (G70 to G73) is started, a check to see if the program contains a block th...

  • Page 319

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 303 - # 2 DCY When an axis (to be used as a drilling axis) perpendicular to the positioning plane is specified in a drilling canned cycle: 0: The specified axis is used as a drilling axis. 1: The axis specified in the block where the G code for the...

  • Page 320

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 304 - #7 #6 #5 #4 #3 #2 #1 #0 FCK 5104 FCK [Input type] Parameter input [Data type] Bit path # 2 FCK In a multiple repetitive canned cycle (G71/G72,G71.7/G72.7), the machining profile is: 0: Not checked. 1: Checked. The target...

  • Page 321

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 305 - # 2 RF2 In a multiple repetitive canned cycle (G71/G72,G71.7/G72.7) of type II, roughing is: 0: Performed. 1: Not performed. NOTE When a roughing allowance (∆i/∆k) is specified using the Series 15 program format, roughing is performed,...

  • Page 322

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 306 - M code for C-axis clamping in a drilling canned cycle 5110 [Input type] Parameter input [Data type] 2-word path [Valid data range] 0 to 99999998 This parameter sets an M code for C-axis clamping in a drilling canned cycle. Dwell time whe...

  • Page 323

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 307 - 5114 Return value of high-speed peck drilling cycle [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 di...

  • Page 324

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 308 - 4.23.2 Parameters of Thread Cutting Cycle Cutting value (chamfering value) in thread cutting cycles G92 and G76 5130 Cutting value (chamfering value) in thread cutting cycle G76.7 [Input type] Parameter input [Data type] Byte path [Unit of...

  • Page 325

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 309 - 4.23.3 Parameters of Multiple Repetitive Canned Cycle Depth of cut in multiple repetitive canned cycles G71 and G72 5132 Depth of cut in multiple repetitive canned cycles G71.7 and G72.7 [Input type] Parameter input [Data type] Real path [...

  • Page 326

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 310 - Clearance value in multiple repetitive canned cycles G71 and G72 5134 Clearance value in multiple repetitive canned cycles G71.7 and G72.7 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum uni...

  • Page 327

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 311 - Retraction distance in the multiple repetitive canned cycle G73 (first axis on the plane) 5136 Retraction distance in the multiple repetitive canned cycle G73.7 (first axis on the plane) [Input type] Parameter input [Data type] Real path [U...

  • Page 328

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 312 - Minimum depth of cut in the multiple repetitive canned cycle G76 5140 Minimum depth of cut in the multiple repetitive canned cycle G76.7 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit ...

  • Page 329

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 313 - Tool nose angle in multiple repetitive canned cycle G76 5143 Tool nose angle in multiple repetitive canned cycle G76.7 [Input type] Parameter input [Data type] Byte path [Unit of data] Degree [Valid data range] 0, 29, 30, 55, 60, 80 This p...

  • Page 330

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 314 - Allowable value 2 in multiple repetitive canned cycles G71 and G72 5146 Allowable value 2 in multiple repetitive canned cycles G71.7 and G72.7 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimu...

  • Page 331

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 315 - 4.23.4 Parameters of Canned Cycle for Drilling (2 of 2) 5148 Tool retraction direction after orientation in a fine boring cycle or back boring cycle [Input type] Parameter input [Data type] Byte axis [Valid data range] -24 to 24 This para...

  • Page 332

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 316 - #7 #6 #5 #4 #3 #2 #1 #0 CYM 5160 CYM NOL OLS [Input type] Parameter input [Data type] Bit path #1 OLS When an overload torque detection signal is received in a peck drilling cycle of a small diameter, the feedrate and spin...

  • Page 333

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 317 - 5164 Percentage of the spindle speed to be changed at the start of the next advancing after an overload torque detection signal is received [Input type] Parameter input [Data type] Word path [Unit of data] % [Valid data range] 1 to 255 Th...

  • Page 334

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 318 - 5166 Percentage of the cutting feedrate to be changed at the start of the next cutting after an overload torque detection signal is received [Input type] Parameter input [Data type] Word path [Unit of data] % [Valid data range] 1 to 255 T...

  • Page 335

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 319 - 5168 Lower limit of the percentage of the cutting feedrate in a peck drilling cycle of a small diameter [Input type] Parameter input [Data type] Byte path [Unit of data] % [Valid data range] 1 to 255 This parameter sets the lower limit of...

  • Page 336

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 320 - 5172 Feedrate of retraction to point R when no address I is specified [Input type] Parameter input [Data type] Real path [Unit of data] mm/min, inch/min (input unit) [Minimum unit of data] Depend on the increment system of the reference a...

  • Page 337

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 321 - 4.23.5 Parameters of Canned Cycle for Grinding (for Grinding Machine) Grinding axis number in Traverse Grinding Cycle(G71) 5176 Grinding axis number in Plunge Grinding Cycle(G75) [Input type] Parameter input [Data type] Byte path [Valid da...

  • Page 338

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 322 - Grinding axis number of Oscillation Grinding Cycle(G73) 5178 Grinding axis number of Continuous feed surface grinding cycle(G78) [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Number of controlled axes For the La...

  • Page 339

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 323 - 5180 Axis number of dressing axis in Plunge grinding cycle(G75) [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Number of controlled axes Set the axis number of dressing axis in Plunge grinding cycle(G75). NOTE ...

  • Page 340

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 324 - 5182 Axis number of dressing axis in Continuous feed surface grinding cycle(G78) [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Number of controlled axes Set the axis number of dressing axis in Continuous feed s...

  • Page 341

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 325 - 4.24 PARAMETERS OF RIGID TAPPING #7 #6 #5 #4 #3 #2 #1 #0 SRS FHD PCP DOV SIG CRG G84 5200 FHD PCP DOV SIG CRG G84 [Input type] Parameter input [Data type] Bit path # 0 G84 Method for specifying rigid tapping: 0: An M code specifyi...

  • Page 342

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 326 - #7 #6 #5 #4 #3 #2 #1 #0 5201 OV3 OVU TDR [Input type] Parameter input [Data type] Bit path # 2 TDR Cutting time constant in rigid tapping: 0: Uses a same parameter during cutting and extraction (Parameter Nos. 5261 through 5264) 1...

  • Page 343

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 327 - # 3 CHR Rigid tapping is: 0: Normal rigid tapping. 1: Interpolation type rigid tapping. NOTE 1 The rigid tapping function and interpolation type rigid tapping function cannot be used together within a path. 2 Before the interpolation type ri...

  • Page 344

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 328 - # 2 RFF In rigid tapping, feed forward is: 0: Disabled. 1: Enabled. (Recommended) As the standard setting, set 1. At the same time, set the parameter for the advanced preview feed forward coefficient for the tapping axis and the parameter fo...

  • Page 345

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 329 - # 1 RIP When a movement from the initial point to point R is made, the in-position check is: 0: Dependent on the setting of bit 5 (NCI) of parameter No. 1601. 1: Performed. NOTE This parameter is valid when bit 5 (NCI) of parameter No.1601 ...

  • Page 346

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 330 - 5213 Return in peck rigid tapping cycle [Input type] Setting input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the drilling axis [Valid data range] 0 or positive 9 dig...

  • Page 347

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 331 - 5221 Number of gear teeth on the spindle side in rigid tapping (first gear) 5222 Number of gear teeth on the spindle side in rigid tapping (second gear) 5223 Number of gear teeth on the spindle side in rigid tapping (third gear) Number of ...

  • Page 348

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 332 - 5241 Maximum spindle speed in rigid tapping (first gear) 5242 Maximum spindle speed in rigid tapping (second gear) 5243 Maximum spindle speed in rigid tapping (third gear) Maximum spindle speed in rigid tapping (fourth gear) 5244 [Inpu...

  • Page 349

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 333 - 5271 Time constant for acceleration/deceleration in rigid tapping extraction (first gear) 5272 Time constant for acceleration/deceleration in rigid tapping extraction (second gear) 5273 Time constant for acceleration/deceleration in rigid t...

  • Page 350

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 334 - 5280 Position control loop gain for the spindle and tapping axis in rigid tapping (common to gears) 5281 Position control loop gain for the spindle and tapping axis in rigid tapping (first gear) 5282 Position control loop gain for the spindl...

  • Page 351

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 335 - 5291 Loop gain multiplier for the spindle in rigid tapping (first gear) 5292 Loop gain multiplier for the spindle in rigid tapping (second gear) 5293 Loop gain multiplier for the spindle in rigid tapping (third gear) Loop gain multiplier f...

  • Page 352

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 336 - 5300 Tapping axis in-position width in rigid tapping (first spindle) [Input type] Parameter input [Data type] Word axis [Unit of data] Detection unit [Valid data range] 0 to 32767 This parameter sets a tapping axis in-position width when ri...

  • Page 353

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 337 - 5306 Tapping axis in-position width in rigid tapping (fourth spindle) [Input type] Parameter input [Data type] Word axis [Unit of data] Detection unit [Valid data range] 0 to 32767 This parameter sets a tapping axis in-position width when r...

  • Page 354

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 338 - 5311 Limit value of spindle positioning deviation during movement in rigid tapping [Input type] Parameter input [Data type] 2-word spindle [Unit of data] Detection unit [Valid data range] 0 to 99999999 This parameter sets the limit value of...

  • Page 355

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 339 - 5312 Positional deviation limit imposed while the tapping axis is stopped in rigid tapping (first spindle) [Input type] Parameter input [Data type] Word axis [Unit of data] Detection unit [Valid data range] 0 to 32767 This parameter sets a ...

  • Page 356

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 340 - 5350 Positional deviation limit imposed during tapping axis movement in rigid tapping (second spindle) [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 99999999 This parameter sets a...

  • Page 357

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 341 - 5358 Positional deviation limit imposed during tapping axis movement in rigid tapping (fourth spindle) [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 99999999 This parameter sets a...

  • Page 358

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 342 - 5381 Override value during rigid tapping return [Input type] Parameter input [Data type] Word path [Unit of data] % [Valid data range] 0 to 200 This parameter is used to set the override value during rigid tapping return. If the setting is ...

  • Page 359

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 343 - 4.25 PARAMETERS OF SCALING/COORDINATE ROTATION #7 #6 #5 #4 #3 #2 #1 #0 5400 SCR XSC LV3 D3R RIN [Input type] Parameter input [Data type] Bit path # 0 RIN Coordinate rotation angle command (R) : 0: Specified by an absolute method 1:...

  • Page 360

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 344 - 5410 Angular displacement used when no angular displacement is specified for coordinate system rotation [Input type] Setting input [Data type] 2-word path [Unit of data] 0.001 degree [Valid data range] -360000 to 360000 This parameter sets ...

  • Page 361

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 345 - 5421 Scaling magnification for each axis [Input type] Setting input [Data type] 2-word axis [Unit of data] 0.001 or 0.00001 times (Selected using SCR, #7 of parameter No.5400) [Valid data range] -999999999 to –1, 1 to 999999999 This param...

  • Page 362

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 346 - 4.26 PARAMETERS OF SINGLE DIRECTIONAL POSITIONING #7 #6 #5 #4 #3 #2 #1 #0 5431 PDI MDL [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the power must be turned off before operati...

  • Page 363

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 347 - 4.27 PARAMETERS OF POLAR COORDINATE INTERPOLATION #7 #6 #5 #4 #3 #2 #1 #0 5450 PLS PDI [Input type] Parameter input [Data type] Bit path # 0 PDI When the second axis on the plane in the polar coordinate interpolation mode is bas...

  • Page 364

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 348 - 5464 Compensation for error on hypothetical axis of polar coordinate interpolation [Input type] Parameter input [Data type] Byte path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the referenc...

  • Page 365

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 349 - 4.28 PARAMETERS OF NORMAL DIRECTION CONTROL 5480 Number of the axis for controlling the normal direction [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to the maximum controlled axis number This parameter sets the...

  • Page 366

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 350 - 5483 Limit value of movement that is executed at the normal direction angle of a preceding block [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system...

  • Page 367

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 351 - 4.29 PARAMETERS OF INDEX TABLE INDEXING #7 #6 #5 #4 #3 #2 #1 #0 5500 IDX SIM G90 INC ABS REL DDP [Input type] Parameter input [Data type] Bit path # 0 DDP As the method for inputting a decimal point in a command for the index table i...

  • Page 368

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 352 - #7 #6 #5 #4 #3 #2 #1 #0 5501 ISP ITI [Input type] Parameter input [Data type] Bit path # 0 ITI The index table indexing function is: 0: Enabled. 1: Disabled. # 1 ISP Servo-off for an index axis at the completion of clamping ...

  • Page 369

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 353 - 5511 M code that specifies rotation in the negative direction for index table indexing [Input type] Parameter input [Data type] 2-word path [Valid data range] 0 to 99999999 0: The rotation direction for the index table indexing axis is deter...

  • Page 370

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 354 - 4.30 PARAMETERS OF INVOLUTE INTERPOLATION 5610 Limit of initial permissible error during involute interpolation [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the in...

  • Page 371

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 355 - 4.31 PARAMETERS OF EXPONENTIAL INTERPOLATION #7 #6 #5 #4 #3 #2 #1 #0 5630 SPN [Input type] Parameter input [Data type] Bit path # 0 SPN The amount of linear axis division (span value) in exponential interpolation is: 0: Specifi...

  • Page 372

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 356 - 4.32 PARAMETERS OF FLEXIBLE SYNCHRONOUS CONTROL (1 OF 2) 5660 Master axis number (group A) 5661 Slave axis number (group A) 5662 Master axis number (group B) 5663 Slave axis number (group B) 5664 Master axis number (group C) 5665 Slav...

  • Page 373

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 357 - # 3 ACD Update of the machine coordinates of flexible synchronous control group D is: 0 : Executed. 1 : Not executed. NOTE The machine coordinates update is not done though the slave axis operates on the motor. In this case, if an automati...

  • Page 374

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 358 - 5680 Numerator determining gear ratio for flexible synchronization(group A) 5681 Denominator determining gear ratio for flexible synchronization(group A) 5682 Numerator determining gear ratio for flexible synchronization(group B) 5683 Deno...

  • Page 375

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 359 - 4.33 PARAMETERS OF STRAIGHTNESS COMPENSATION (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 5700 SM2 RSR [Input type] Parameter input [Data type] Bit path # 0 RSR Rewriting of real-time data of straightness compensation is: 0: Disabled. 1: En...

  • Page 376

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 360 - # 2 SM2 In the straightness compensation function, magnification parameters (parameter Nos.13391 to 13396) are treated as follows: 0: When more than one moving axis is set with the same number, the setting of the magnification parameter for t...

  • Page 377

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 361 - 5721 Straightness compensation : Axis number of compensation axis 1 for moving axis 1 5722 Straightness compensation : Axis number of compensation axis 2 for moving axis 2 5723 Straightness compensation : Axis number of compensation axis ...

  • Page 378

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 362 - 5741 Straightness compensation : Compensation point number a of moving axis 2 5742 Straightness compensation : Compensation point number b of moving axis 2 5743 Straightness compensation : Compensation point number c of moving axis 2 574...

  • Page 379

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 363 - 5761 Compensation corresponding compensation point number a of moving axis 1 5762 Compensation corresponding compensation point number b of moving axis 1 5763 Compensation corresponding compensation point number c of moving axis 1 5764 Com...

  • Page 380

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 364 - 5781 Compensation corresponding compensation point number a of moving axis 3 5782 Compensation corresponding compensation point number b of moving axis 3 5783 Compensation corresponding compensation point number c of moving axis 3 5784 Com...

  • Page 381

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 365 - 4.34 PARAMETERS OF INCLINATION COMPENSATION 5861 Inclination compensation : Compensation point number a for each axis 5862 Inclination compensation : Compensation point number b for each axis 5863 Inclination compensation : Compensation poi...

  • Page 382

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 366 - 4.35 PARAMETERS OF CUSTOM MACROS #7 #6 #5 #4 #3 #2 #1 #0 SBV SBM HGO MGO G67 6000 SBV SBM HGO V15 MGO G67 [Input type] Parameter input [Data type] Bit path # 0 G67 If the macro modal call cancel command (G67) is specified when t...

  • Page 383

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 367 - # 4 HGO When a GOTO statement in a custom macro control command is executed, a high-speed branch to the 30 sequence numbers immediately before the executed statement is: 0: Not made. 1: Made. # 5 SBM Custom macro statement 0: Not stop t...

  • Page 384

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 368 - # 3 PV5 Custom macro common variables: 0: #500 to #549 are output. (Note) 1: #100 to #149 and #500 to 549 are output. (Note) NOTE Output variables are as follows according to the combination of added options. When the parameter PV5=0 Opti...

  • Page 385

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 369 - #7 #6 #5 #4 #3 #2 #1 #0 6003 MUS MSB MPR TSE MIN MSK [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 1 MSK Absolute ...

  • Page 386

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 370 - # 2 VHD With system variables #5121 to #5140: 0: The tool offset value (geometry offset value) in the block currently being executed is read. (This parameter is valid only when tool geometry/tool wear compensation memories are available.) 1:...

  • Page 387

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 371 - # 2 BCS Specifies whether to call subprograms with the second auxiliary function codes. 0: Do not call with the second auxiliary function codes. 1: Call with the second auxiliary function codes. # 3 MGE Specifies whether a G code modal c...

  • Page 388

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 372 - # 2 DSM On the custom macro screen, the rewriting of a system variable that can be specified (written) on the left side from the MDI panel is: 0: Disabled. 1: Enabled. # 3 KOP When the NC is reset in the state where the line is made open...

  • Page 389

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 373 - #7 #6 #5 #4 #3 #2 #1 #0 6010 *7 *6 *5 *4 *3 *2 *1 *0 #7 #6 #5 #4 #3 #2 #1 #0 6011 =7 =6 =5 =4 =3 =2 =1 =0 #7 #6 #5 #4 #3 #2 #1 #0 6012 #7 #6 #5 #4 #3 #2 #1 #0 #7 #6 #5 #4 #3 #2 #1 #0 6013 [7 [6 [5 [4 [3 [2 [1 [0 #7 #6 #5 #4 #3 #2 #1...

  • Page 390

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 374 - #7 #6 #5 #4 #3 #2 #1 #0 6019 MCO [Input type] Parameter input [Data type] Bit #0 MCO When data is output, the decimal number value of the macro variable data is 0: Not output as a comment. 1: Output at the same time as a comment....

  • Page 391

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 375 - 6031 Start number of common variables to be protected among the common variables (#500 to #999) 6032 End number of common variables to be protected among the common variables (#500 to #999) [Input type] Parameter input [Data type] Word path...

  • Page 392

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 376 - 6036 Number of custom macro variables common to tool path (for #100 to #199 (#499)) [Input type] Parameter input [Data type] Word [Valid data range] 0 to 400 When the memory common to paths is used, this parameter sets the number of custom ...

  • Page 393

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 377 - 6037 Number of custom macro variables common to tool path (for #500 to #999) [Input type] Parameter input [Data type] Word [Valid data range] 0 to 500 When the memory common to paths is used, this parameter sets the number of custom macro com...

  • Page 394

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 378 - 6040 Number of G codes used to call custom macros [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 255 Set this parameter to define multiple custom macro calls using G codes at a time. With G codes as many as the va...

  • Page 395

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 379 - 6041 Start G code with a decimal point used to call a custom macro [Input type] Parameter input [Data type] Word path [Valid data range] -999 to 999 6042 Start program number of a custom macro called by G code with a decimal point [Input ...

  • Page 396

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 380 - 6044 Start M code used to call a subprogram [Input type] Parameter input [Data type] 2-word path [Valid data range] 3 to 99999999 6045 Start program number of a subprogram called by M code [Input type] Parameter input [Data type] 2-wor...

  • Page 397

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 381 - 6047 Start M code used to call a custom macro [Input type] Parameter input [Data type] 2-word path [Valid data range] 3 to 99999999 6048 Start program number of a custom macro called by M code [Input type] Parameter input [Data type] 2-...

  • Page 398

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 382 - 6050 G code that calls the custom macro of program number 9010 6051 G code that calls the custom macro of program number 9011 6052 G code that calls the custom macro of program number 9012 6053 G code that calls the custom macro of program...

  • Page 399

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 383 - 6060 G code with a decimal point used to call the custom macro of program number 9040 6061 G code with a decimal point used to call the custom macro of program number 9041 6062 G code with a decimal point used to call the custom macro of pro...

  • Page 400

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 384 - 6071 M code used to call the subprogram of program number 9001 6072 M code used to call the subprogram of program number 9002 6073 M code used to call the subprogram of program number 9003 6074 M code used to call the subprogram of program...

  • Page 401

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 385 - 6080 M code used to call the custom macro of program number 9020 6081 M code used to call the custom macro of program number 9021 6082 M code used to call the custom macro of program number 9022 6083 M code used to call the custom macro of...

  • Page 402

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 386 - 6090 ASCII code that calls the subprogram of program number 9004 6091 ASCII code that calls the subprogram of program number 9005 [Input type] Parameter input [Data type] Byte path [Valid data range] 65(A:41H) to 90(Z:5AH) These parameters...

  • Page 403

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 387 - 6096 The first O number of the program used by the one touch macro call function [Input type] Parameter input [Data type] 2-word path [Valid data range] 1 to 9999 Specify the first O number of the program used by the one touch macro call func...

  • Page 404

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 388 - 4.36 PARAMETERS OF PATTERN DATA INPUT 6101 Macro variable number selected first when pattern menu 1 is selected 6102 Macro variable number selected first when pattern menu 2 is selected 6103 Macro variable number selected first when pattern...

  • Page 405

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 389 - 4.37 PARAMETERS OF POSITIONING BY OPTIMUM ACCELERATION #7 #6 #5 #4 #3 #2 #1 #0 6131 OAD [Input type] Parameter input [Data type] Bit axis NOTE When this parameter is set, the power must be turned off before operation is continued....

  • Page 406

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 390 - 6136 Distance D1 for level 1 of positioning by optimum acceleration for each axis 6137 Distance D2 for level 2 of positioning by optimum acceleration for each axis 6138 Distance D3 for level 3 of positioning by optimum acceleration for each a...

  • Page 407

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 391 - 6161 Level 1 rapid traverse rate 6162 Level 2 rapid traverse rate 6163 Level 3 rapid traverse rate 6164 Level 4 rapid traverse rate 6165 Level 5 rapid traverse rate 6166 Level 6 rapid traverse rate 6167 Level 7 rapid traverse rate ...

  • Page 408

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 392 - 6181 Level 1 servo loop gain 6182 Level 2 servo loop gain 6183 Level 3 servo loop gain 6184 Level 4 servo loop gain 6185 Level 5 servo loop gain 6186 Level 6 servo loop gain 6187 Level 7 servo loop gain [Input type] Parameter input...

  • Page 409

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 393 - 4.38 PARAMETERS OF SKIP FUNCTION #7 #6 #5 #4 #3 #2 #1 #0 6200 SKF SRE SLS HSS SK0 GSK [Input type] Parameter input [Data type] Bit path # 0 GSK As a skip signal, the skip signal SKIPP is: 0: Invalid. 1: Valid. # 1 SK0 This para...

  • Page 410

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 394 - #7 #6 #5 #4 #3 #2 #1 #0 6201 SKPXE CSE IGX TSE SEB [Input type] Parameter input [Data type] Bit path # 1 SEB When a skip signal or measurement position arrival signal goes on while the skip function, or the automatic tool length meas...

  • Page 411

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 395 - # 7 SKPXE For the skip function (G31), the skip signal SKIP is: 0: Enabled. 1: Disabled. Whether the skip signals are enabled or disabled Parameter IGX (No.6201#4) GSK (No.6200#0) SKPXE (No.6201#7)Skip signalSKIPP Skip signalSKIP Multistage ...

  • Page 412

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 396 - #7 #6 #5 #4 #3 #2 #1 #0 6203 2S8 2S7 2S6 2S5 2S4 2S3 2S2 2S1 #7 #6 #5 #4 #3 #2 #1 #0 6204 3S8 3S7 3S6 3S5 3S4 3S3 3S2 3S1 #7 #6 #5 #4 #3 #2 #1 #0 6205 4S8 4S7 4S6 4S5 4S4 4S3 4S2 4S1 #7 #6 #5 #4 #3 #2 #1 #0 6206 DS8 DS7 DS6 DS5 DS4 DS...

  • Page 413

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 397 - #7 #6 #5 #4 #3 #2 #1 #0 6207 SFN SFP [Input type] Parameter input [Data type] Bit path # 1 SFP The feedrate used when the skip function (G31) is being executed is: 0: Feedrate of a programmed F code. 1: Feedrate set in parameter ...

  • Page 414

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 398 - #7 #6 #5 #4 #3 #2 #1 #0 6210 MDC ASB ASL DSK [Input type] Parameter input [Data type] Bit path # 2 DSK Skip position reading (system variables #5421 to #5440, #100701 to #100750) by the detection unit is: 0: Disabled. 1: Enabled. ...

  • Page 415

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 399 - 6220 Period during which skip signal input is ignored for the continuous high-speed skip function and EGB axis skip function [Input type] Parameter input [Data type] Byte path [Unit of data] 8msec [Valid data range] 3 to 127(× 8msec) This...

  • Page 416

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 400 - #7 #6 #5 #4 #3 #2 #1 #0 6224 1A8 1A7 1A6 1A5 1A4 1A3 1A2 1A1 [Input type] Parameter input [Data type] Bit path 1A1 to 1A8 Specify which high-speed measurement position arrival signal is to be enabled for each AE1 signal of G37 (automatic ...

  • Page 417

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 401 - #7 #6 #5 #4 #3 #2 #1 #0 6226 3A8 3A7 3A6 3A5 3A4 3A3 3A2 3A1 [Input type] Parameter input [Data type] Bit path 3A1 to 3A8 Specify which high-speed measurement position arrival signal is to be enabled for each AE3 signal of G37 (automatic ...

  • Page 418

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 402 - Feedrate during measurement of automatic tool compensation (T series) (for the XAE1 and GAE1 signals) 6241 Feedrate during measurement of automatic tool length measurement (M series) (for the XAE1 and GAE1 signals) Feedrate during measurement...

  • Page 419

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 403 - γ value on the X axis during automatic tool compensation (T series) 6251 γ value during automatic tool length measurement (M series) (for the XAE1 and GAE1 signals) γ value on the Z axis during automatic tool compensation (T series) 6252 ...

  • Page 420

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 404 - 6254 ε value on the X axis during automatic tool compensation (T series) ε value during automatic tool length measurement (M series) (for the XAE1 and GAE1 signals) 6255 ε value on the Z axis during automatic tool compensation (T series) ...

  • Page 421

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 405 - 6281 Feedrate for the skip function (G31) [Input type] Parameter input [Data type] Real path [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of the reference axis [Valid data...

  • Page 422

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 406 - 6287 Positional deviation limit in torque limit skip [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 327670 This parameter sets a positional deviation limit for each axis imposed wh...

  • Page 423

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 407 - 4.39 PARAMETERS OF EXTERNAL DATA INPUT/OUTPUT #7 #6 #5 #4 #3 #2 #1 #0 6300 EEX ESR ESC [Input type] Parameter input [Data type] Bit path # 3 ESC When a reset is input between the input of the external data input read signal ESTB ...

  • Page 424

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 408 - # 1 EXM This bit selects an external operator message specification. 0: A message number from 0 to 999 can be sent. The message of a message number from 0 to 99 is displayed together with its number. The CNC adds 2000 to a number for distinct...

  • Page 425

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 409 - 4.40 PARAMETERS OF MANUAL HANDLE RETRACE (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 6400 MG4 MGORVN HMP MC8 MC5 FWD RPO [Input type] Parameter input [Data type] Bit path # 0 RPO With the manual handle retrace function, the rapid traverse rate i...

  • Page 426

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 410 - # 5 RVN When the manual handle retrace function is used, M codes other than grouped M codes: 0: Do not disable backward movement. 1: Disable backward movement. When this parameter is set to 1, M codes other than grouped M codes disable backw...

  • Page 427

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 411 - # 2 CHS In manual handle retrace: 0: The status is displayed if the following conditions are all satisfied: (1) The manual handle retrace software option is used. (2) Bit 6 (HST) of parameter No. 6401, which specifies whether to enable or dis...

  • Page 428

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 412 - 6410 Travel distance per pulse generated from the manual pulse generator [Input type] Parameter input [Data type] Word path [Unit of data] % [Valid data range] 0 to 100 Set the travel distance per pulse generated from the manual pulse gener...

  • Page 429

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 413 - 6439 M code of group H in manual handle retrace (1) to 6442 M code of group H in manual handle retrace (4) 6443 M code of group I in manual handle retrace (1) to 6446 M code of group I in manual handle retrace (4) 6447 M code of group J in...

  • Page 430

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 414 - 6487 M code of group T in manual handle retrace (1) to 6490 M code of group T in manual handle retrace (4) [Input type] Parameter input [Data type] 2-word path [Valid data range] 0 to 9999 Set a group of M codes output during backward move...

  • Page 431

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 415 - 4.41 PARAMETERS OF GRAPHIC DISPLAY (1 OF 4) #7 #6 #5 #4 #3 #2 #1 #0 CSR 6501 CSR [Input type] Parameter input [Data type] Bit path #5 CSR On the PATH GRAPHIC (TOOL POSITION) screen, the shape of the cursor indicating th...

  • Page 432

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 416 - For machining center systems: YXSetting=0 (XY) ZYSetting=1 (YZ) X ZSetting=2 (ZX) ZXSetting=3 (XZ) Setting=4 (XYZ) ZXYSetting=5 (ZXY) Y Z X When the dynamic graphic display function is used, the relationship between the setting and the drawing...

  • Page 433

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 417 - 4.42 PARAMETERS OF SCREEN DISPLAY COLORS (1 OF 2) 6581 RGB value of color palette 1 6582 RGB value of color palette 2 6583 RGB value of color palette 3 6584 RGB value of color palette 4 6585 RGB value of color palette 5 6586 RGB value...

  • Page 434

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 418 - 4.43 PARAMETERS OF RUN HOUR AND PARTS COUNT DISPLAY #7 #6 #5 #4 #3 #2 #1 #0 6700 PRT PCM [Input type] Parameter input [Data type] Bit path # 0 PCM M code that counts the total number of machined parts and the number of machined ...

  • Page 435

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 419 - 6712 Total number of machined parts [Input type] Setting input [Data type] 2-word path [Valid data range] 0 to 999999999 This parameter sets the total number of machined parts. The total number of machined parts is counted (+1) when M02, M3...

  • Page 436

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 420 - 6753 Integrated value of cutting time 1 [Input type] Setting input [Data type] 2-word path [Unit of data] msec [Valid data range] 0 to 59999 For details, see the description of parameter No. 6754. 6754 Integrated value of cutting time 2 ...

  • Page 437

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 421 - 6758 Operation time (integrated value of one automatic operation time) 2 [Input type] Setting input [Data type] 2-word path [Unit of data] min [Valid data range] 0 to 999999999 This parameter displays the one automatic operation drive time ...

  • Page 438

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 422 - 4.44 PARAMETERS OF TOOL MANAGEMENT FUNCTIONS (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 6801 LVF NOTE The use of this parameter varies depending on whether the tool management function or tool life management function is used. [Input type] P...

  • Page 439

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 423 - 4.45 PARAMETERS OF TOOL LIFE MANAGEMENT (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 6800 M6T IGI SNG GRS SIG LTM GS2 GS1 [Input type] Parameter input [Data type] Bit path # 0 GS1 # 1 GS2 For the maximum number of groups set in parameter No....

  • Page 440

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 424 - # 4 GRS When the tool change reset signal (TLRST) is input: 0: If the life of the group specified by the tool group number selection signals has expired, the execution data of the group is cleared. 1: The execution data of all registered grou...

  • Page 441

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 425 - # 3 EMD In the tool life management function, the mark "*" indicating that the life has expired is displayed when: 0: The next tool is used. 1: The life has just expired. NOTE If this parameter is set to 0, the "@" mark (...

  • Page 442

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 426 - M If the life count is specified by use count, after the M99 command is specified, a tool group command (T code) selects, from a specified group, a tool whose life has not expired, and the next tool change command (M06) increments the tool life c...

  • Page 443

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 427 - # 3 GRP Management data of tool life arrival notice signal TLCHB is: 0: Managed using the remaining life value set in parameter No. 6844 and 6845. 1: Managed using the remaining life value set in tool life management data. NOTE When the too...

  • Page 444

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 428 - # 7 RMT Tool life arrival notice signal TLCHB is turned on and off as follows: 0: The signal is turned on if the remaining life value (the life value minus the life counter value) is smaller than or equal to the remaining life setting. The si...

  • Page 445

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 429 - # 2 ETE In the tool life management screen, the mark of the tool at the life was expired of the final tool in the group : 0: depends on setting parameter EMD (No.6801#3). 1: is "*" mark. If bit 2 (ETE) of parameter No. 6804 is set t...

  • Page 446

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 430 - # 4 LFB The tool life management B function is: 0: Disabled. 1: Enabled. When the tool life management B function is enabled, the following functions can be used: <1> Tool life value extension (count specification: 99999999 times, durat...

  • Page 447

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 431 - 6810 Tool life management ignore number [Input type] Parameter input [Data type] 2-word path [Valid data range] 0 to 99999999 This parameter sets the tool life management ignore number. When the value specified in a T code exceeds the value ...

  • Page 448

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 432 - 6813 Maximum number of groups in tool life management NOTE After this parameter has been set, the power must be turned off then back on for the setting to become effective. [Input type] Parameter input [Data type] Word path [Unit of data] ...

  • Page 449

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 433 - 4.46 PARAMETERS OF POSITION SWITCH FUNCTIONS #7 #6 #5 #4 #3 #2 #1 #0 6901 PSA EPW [Input type] Parameter input [Data type] Bit path # 1 EPW The number of position switches is: 0: Not extended. 1: Extended. # 2 PSA In determ...

  • Page 450

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 434 - 6930 Maximum value of the operating range of the 1-st position switch (PSW101) 6931 Maximum value of the operating range of the 2-nd position switch (PSW102)to to 6945 Maximum value of the operating range of the 16-th position switch (PSW11...

  • Page 451

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 435 - 4.47 PARAMETERS OF MANUAL OPERATION AND AUTOMATIC OPERATION #7 #6 #5 #4 #3 #2 #1 #0 7001 MFM JEX JSN JST ABS [Input type] Parameter input [Data type] Bit path # 1 ABS For the move command after manual intervention in the manual abs...

  • Page 452

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 436 - # 2 JTF In manual numerical specification, T function specification is: 0: Allowed. 1: Not allowed. # 3 JBF In manual numerical specification, B function specification is: 0: Allowed. 1: Not allowed. #7 #6 #5 #4 #3 #2 #1 #0 7010 ...

  • Page 453

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 437 - 7041 Retraction distance in tool retract and return [Input type] Setting input [Data type] Real axis [Unit of data] mm, inch, deg (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 9 d...

  • Page 454

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 438 - 4.48 PARAMETERS OF MANUAL HANDLE FEED, HANDLE INTERRUPTION AND HANDLE FEED IN TOOL AXIAL DIRECTION #7 #6 #5 #4 #3 #2 #1 #0 7100 MPX HCL THD JHD [Input type] Parameter input [Data type] Bit path # 0 JHD Manual handle feed in JOG fe...

  • Page 455

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 439 - # 1 HNAx When manual handle feed direction inversion signal HDN<Gn0347.1> is set to “1”, the direction of movement is set for each axis with respect to the rotation direction of the manual pulse generator. 0: The axis movement direc...

  • Page 456

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 440 - #7 #6 #5 #4 #3 #2 #1 #0 7105 LBH HDX [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 1 HDX Manual handle for I/O Link...

  • Page 457

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 441 - 7113 Manual handle feed magnification m [Input type] Parameter input [Data type] Word path [Valid data range] 1 to 2000 This parameter sets the magnification m when manual handle feed movement selection signals MP1 and MP2 are set to 0 and 1...

  • Page 458

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 442 - Amount of pulses B is calculated in 2 cases as following: In case of 1) Parameter No.7117 = 0 The feedrate is clamped at the Rapid Traverse Rate and generated pulses exceeding the Rapid Traverse Rate are ignored (B=0) In case of 2) Parameter N...

  • Page 459

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 443 - 7131 Manual handle feed magnification m2 / 2nd. manual pulse generator 7132 Manual handle feed magnification n2 / 2nd. manual pulse generator 7133 Manual handle feed magnification m3 / 3rd. manual pulse generator 7134 Manual handle feed ma...

  • Page 460

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 444 - 4.49 PARAMETERS OF REFERENCE POSITION WITH MECHANICAL STOPPER 7181 First withdrawal distance in reference position setting with mechanical stopper 7182 Second withdrawal distance in butt-type reference position setting with mechanical stopper...

  • Page 461

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 445 - 7186 Torque limit value in butt-type reference position setting with mechanical stopper [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to 100 This parameter sets a torque limit value. A value from 0 to 100 correspond...

  • Page 462

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 446 - 4.50 PARAMETERS OF SOFTWARE OPERATOR'S PANEL #7 #6 #5 #4 #3 #2 #1 #0 7200 OP7 OP6 OP5 OP4 OP3 OP2 OP1 [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the power must be turned off befo...

  • Page 463

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 447 - #7 #6 #5 #4 #3 #2 #1 #0 7201 JPC [Input type] Parameter input [Data type] Bit path # 0 JPC For the name of a general-purpose switch function on the software operator's panel, the use of full-size characters is: 0: Not allowed. 1...

  • Page 464

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 448 - 7210 Jog-movement axis and its direction on software operator's panel “↑” 7211 Jog-movement axis and its direction on software operator's panel “↓” 7212 Jog-movement axis and its direction on software operator's panel “→” ...

  • Page 465

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 449 - 7220 Name of general-purpose switch 1 on software operator's panel (first character) to to 7283 Name of general-purpose switch 8 on software operator's panel (eighth character) 7284 Name of general-purpose switch 9 on software operator's p...

  • Page 466

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 450 - Character code list CharacterCode CharacterCode Character Code A 65 Q 81 6 54 B 66 R 82 7 55 C 67 S 83 8 56 D 68 T 84 9 57 E 69 U 85 32 F 70 V 86 ! 33 G 71 W 87 “ 34 H 72 X 88 # 35 I 73 Y 89 $ 36 J 74 Z 90 % 37 K 75 0 48 & 38 L 76 1 49 ‘...

  • Page 467

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 451 - 4.51 PARAMETERS OF PROGRAM RESTART #7 #6 #5 #4 #3 #2 #1 #0 7300 MOUMOA [Input type] Parameter input [Data type] Bit path # 6 MOA In program restart operation, before movement to a machining restart point: 0: The last M, S, T, an...

  • Page 468

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 452 - 4.52 PARAMETERS OF HIGH-SPEED CYCLE CUTTING #7 #6 #5 #4 #3 #2 #1 #0 7501 IPC IT2 IT1 IT0 [Input type] Parameter input [Data type] Bit path # 4 IT0 # 5 IT1 # 6 IT2 IT2IT1IT0Interpolation of high-speed cutting G05 data (m...

  • Page 469

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 453 - #7 #6 #5 #4 #3 #2 #1 #0 7503 HCT [Input type] Parameter input [Data type] Bit path # 4 HCT The variable number for starting storage of high-speed cycle machining distribution data is: 0: Specified by 1/10. 1: Specified by 1/100....

  • Page 470

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 454 - 7514 Retract direction and retract feedrate in high-speed cycle machining retract operation [Input type] Parameter input [Data type] Real axis [Valid data range] Refer to standard parameter setting table (C) This parameter sets a retract dir...

  • Page 471

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 455 - 4.53 PARAMETERS OF ROTARY TABLE DYNAMIC FIXTURE OFFSET #7 #6 #5 #4 #3 #2 #1 #0 7570 CFA FTP [Input type] Parameter input [Data type] Bit path # 0 FTP Fixture offset type setting 0: Movement type (The tool moves when the...

  • Page 472

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 456 - 7580 Rotation axis for fixture offset (first group) 7581 Linear axis 1 for fixture offset (first group) 7582 Linear axis 2 for fixture offset (first group) 7583 Rotation axis for fixture offset (second group) 7584 Linear axis 1...

  • Page 473

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 457 - 4.54 PARAMETERS OF POLYGON TURNING #7 #6 #5 #4 #3 #2 #1 #0 7600 PLZ PFF [Input type] Parameter input [Data type] Bit path # 0 PFF In spindle-servo polygon turning, feed forward for the tool rotation axis (servo axis) during poly...

  • Page 474

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 458 - # 2 HDR When phase control is exercised in spindle-spindle polygon turning mode (parameter COF(No.7602#5) is set to 0), the phase shift direction is: 0: Not reversed for phase synchronization. 1: Reversed for phase synchronization. NOTE The...

  • Page 475

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 459 - # 5 COF In spindle-spindle polygon turning mode, phase control is: 0: Enabled. 1: Disabled. NOTE When the use of phase control is not selected, the steady state is reached in a shorter time because phase synchronization control is not appli...

  • Page 476

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 460 - # 5 RDG On the diagnosis screen No.476, for spindle-spindle polygon phase command value (R), displays: 0: The specified value (in the increment system for the rotation axis). 1: The actual number of shift pulses. NOTE A phase command is spe...

  • Page 477

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 461 - 7621 Maximum allowable speed for the tool rotation axis for polygon turning [Input type] Parameter input [Data type] 2-word path [Unit of data] min-1 [Valid data range] 0 or positive 9 digit of minimum unit of data (refer to the standard pa...

  • Page 478

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 462 - 7635 Ratio of slave spindle speed in spindle synchronization control [Input type] Parameter input [Data type] Byte spindle [Valid data range] 0 to 9 This parameter sets the ratio of master spindle speed:slave spindle speed (1:n) in spindle s...

  • Page 479

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 463 - 7640 Master axis in spindle-spindle polygon turning [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Maximum number of controlled axes (Within a path) This parameter sets the master axis in spindle-spindle polygon t...

  • Page 480

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 464 - 7641 Polygon synchronous axis in spindle-spindle polygon turning [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Maximum number of controlled axes (Within a path) This parameter sets the polygon synchronous (slave)...

  • Page 481

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 465 - 7642 Master axis in spindle-spindle polygon turning (spindle number common to the system) [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Maximum number of controlled axes (Common to the system) This parameter sets...

  • Page 482

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 466 - 7643 Polygon synchronous axis in spindle-spindle polygon turning (spindle number common to the system) [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Maximum number of controlled axes (Common to the system) This p...

  • Page 483

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 467 - 4.55 PARAMETERS OF THE ELECTRONIC GEAR BOX (EGB) #7 #6 #5 #4 #3 #2 #1 #0 7700 HDR HBR [Input type] Parameter input [Data type] Bit path # 0 HBR When the electronic gear box (EGB) function is used, performing a reset: 0: Cancels ...

  • Page 484

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 468 - #7 #6 #5 #4 #3 #2 #1 #0 7701 LZR [Input type] Parameter input [Data type] Bit path # 3 LZR When L (number of hob threads) = 0 is specified at the start of EGB synchronization (G81): 0: Synchronization is started, assuming that L...

  • Page 485

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 469 - #7 #6 #5 #4 #3 #2 #1 #0 7703 ARO ARE ERV [Input type] Parameter input [Data type] Bit path # 0 ERV During EGB synchronization (G81), feed per revolution is performed for: 0: Feedback pulses. 1: Pulses converted to the speed for th...

  • Page 486

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 470 - #7 #6 #5 #4 #3 #2 #1 #0 7704 ACR [Input type] Parameter input [Data type] Bit path # 0 ACR In the AI contour control mode, general purpose retract operation is: 0: Not Used. 1: Used. 7709 Number of the axial feed axis for heli...

  • Page 487

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 471 - #7 #6 #5 #4 #3 #2 #1 #0 7731 HBR RTS ECN EFX [Input type] Parameter input [Data type] Bit path # 0 EFX As the EGB command: 0: G80 and G81 are used. 1: G80.4 and G81.4 are used. NOTE When this parameter is set to 0, no drilling ca...

  • Page 488

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 472 - 7741 Retracted distance [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inch, degree (machine unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 9 digit of minimum unit ...

  • Page 489

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 473 - 7773 Number of position detector pulses per rotation about the workpiece axis [Input type] Parameter input [Data type] 2-word path [Valid data range] 1 to 999999999 This parameter sets the number of pulses per rotation about the workpiece axi...

  • Page 490

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 474 - [Example 2] When the gear ratio of the spindle to the detector B is 2/3 for the above example (When the detector rotates twice for three spindle rotations) In this case, the number of pulses per spindle rotation is: 3160000 = 3280000× 160000 ...

  • Page 491

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 475 - 7778 Acceleration for acceleration/deceleration for the workpiece axis [Input type] Parameter input [Data type] Real axis [Unit of data] deg/sec2 [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] ...

  • Page 492

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 476 - 7783 Number of pulses from the position detector per EGB slave axis rotation [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 1 to 999999999 For a slave axis, set the number of pulses gen...

  • Page 493

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 477 - 4.56 PARAMETERS OF AXIS CONTROL BY PMC (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 8001 SKE AUX NCC RDE OVE MLE [Input type] Parameter input [Data type] Bit path # 0 MLE Whether all axis machine lock signal MLK is valid for PMC-controlled axes...

  • Page 494

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 478 - #7 #6 #5 #4 #3 #2 #1 #0 8002 FR2 FR1 PF2 PF1 F10 DWE RPD [Input type] Parameter input [Data type] Bit path # 0 RPD Rapid traverse rate for PMC-controlled axes 0: Feedrate specified with parameter No.1420 1: Feedrate specified with the...

  • Page 495

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 479 - #7 #6 #5 #4 #3 #2 #1 #0 8003 FEX [Input type] Parameter input [Data type] Bit axis NOTE When this parameter bit is set, the power must be turned off before operation is continued. # 3 FEX The maximum feedrate that can be achie...

  • Page 496

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 480 - CAUTION 1 When this function is enabled, the feedrate is extended to the maximum value that can be specified for cutting feed or continuous feed in PMC axis control if CMR is 1. If CMR is greater than 1, the feedrate is limited to a value smalle...

  • Page 497

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 481 - # 1 CDI In axis control by the PMC, when diameter programming is specified for a PMC-controlled axis: 0: The amount of travel and feedrate are each specified with a radius. 1: The amount of travel is specified with a diameter while the feedra...

  • Page 498

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 482 - # 4 EFD When cutting feed (feed per minute) is used in PMC axis control, the specification unit of feedrate data is: 0: Unchanged (1 times). 1: 100 times greater. NOTE When this parameter is set to 1, bit 3 (F10) of parameter No. 8002 is in...

  • Page 499

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 483 - 8010 Selection of the DI/DO group for each axis controlled by the PMC [Input type] Parameter input [Data type] Byte axis [Valid data range] 1 to 40 Specify the DI/DO group to be used to specify a command for each PMC-controlled axis. For ad...

  • Page 500

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 484 - #7 #6 #5 #4 #3 #2 #1 #0 8011 XRT [Input type] Parameter input [Data type] Bit axis # 0 XRT The axis that uses the group specified by parameter No. 8010 is: 0: Not controlled by the real time custom macro. 1: Controlled by the re...

  • Page 501

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 485 - #7 #6 #5 #4 #3 #2 #1 #0 8019 EOS [Input type] Parameter input [Data type] Bit # 0 EOS In external pulse synchronization (serial spindle synchronization) in PMC axis control, the serial spindle to be synchronized is: 0: The first...

  • Page 502

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 486 - 8028 Time for acceleration/deceleration calculation when a feedrate is specified under PMC axis control [Input type] Parameter input [Data type] Word axis [Unit of data] msec [Valid data range] 0 to 32767 When a feedrate is specified under ...

  • Page 503

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 487 - 8031 FL feedrate for exponential acceleration/deceleration in cutting feed or continuous feed under PMC axis control [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit...

  • Page 504

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 488 - 4.57 PARAMETERS OF MULTI-PATH CONTROL #7 #6 #5 #4 #3 #2 #1 #0 8100 NWPDSB IAL RST [Input type] Parameter input [Data type] Bit machine group # 0 RST The pressing of the reset key on the MDI panel is: 0: Valid for all paths. 1: Val...

  • Page 505

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 489 - #7 #6 #5 #4 #3 #2 #1 #0 8103 MWP MWT [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 0 MWT As the signal interface for...

  • Page 506

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 490 - 8110 Waiting M code range (minimum value) 8111 Waiting M code range (maximum value) [Input type] Parameter input [Data type] 2-word [Valid data range] 0 ,100to99999999 A range of M code values can be set by specifying a minimum waiting M c...

  • Page 507

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 491 - 4.58 PARAMETERS OF INTERFERENCE CHECK BETWEEN PATHS #7 #6 #5 #4 #3 #2 #1 #0 IPF ZCL IFE IFM IT0 TY1 TYO 8140 [Input type] Parameter input [Data type] Bit # 0 TY0 This parameter sets the coordinate system relationship between...

  • Page 508

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 492 - # 4 IFE Interference check between paths is: 0: Performed. 1: Not performed. # 5 ZCL Specifies whether interference along the Z axis is checked while checking interference between paths. 0: Checked. 1: Not checked (Only interference alon...

  • Page 509

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 493 - Tool post 4Tool post 3 Tool post 2 The tool post of path 1 in thesame machine group is used asthe reference tool post. +X+Zζ1 ε1 ε3 Paths in the same machine group ε2 ζ3 ζ2 Tool post 1 Reference position Reference position Reference positio...

  • Page 510

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 494 - Distance along the X axis between the reference positions of tool posts 1 and 2 8151 Distance along the Z axis between the reference positions of tool posts 1 and 2 8152 [Input type] Parameter input [Data type] Real [Unit of data] mm, ...

  • Page 511

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 495 - Coordinate system pattern with the reference position based on the tool post of path 1 in the same machine group 8158 [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 3 This parameter is used for checking the inte...

  • Page 512

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 496 - 4.59 PARAMETERS OF SYNCHRONOUS/COMPOSITE CONTROL AND SUPERIMPOSED CONTROL (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 8160 NRS SPE NCS AXS [Input type] Parameter input [Data type] Bit path # 4 AXS When the axis movement in-progress signal &l...

  • Page 513

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 497 - #7 #6 #5 #4 #3 #2 #1 #0 8161 NSR CRZ NMR [Input type] Parameter input [Data type] Bit # 0 NMR When an axis subject to composite control is placed in servo-off state: 0: Composite control is stopped 1: Composite control is not sto...

  • Page 514

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 498 - # 2 PKUx In the parking state, 0: The absolute, relative, and machine coordinates are not updated. 1: The absolute and relative coordinates are updated. The machine coordinates are not updated. NOTE 1 With an axis for which polar coordinate...

  • Page 515

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 499 - # 5 MPSx When composite control is terminated, the workpiece coordinate system is: 0: Not set automatically. 1: Set automatically. NOTE When the workpiece coordinate system is automatically set at the end of composite control, it is calcula...

  • Page 516

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 500 - # 7 MUMx In composite control, a move command for the axis: 0: Can be specified. 1: Cannot be specified. NOTE Upon the execution of a move command along an axis for which MUMx is set to 1 during mixed control, alarm PS0353 is issued. For...

  • Page 517

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 501 - # 3 SCMx When workpiece coordinates are calculated in synchronous control: 0: The workpiece coordinates are calculated from the machine coordinates of the slave axis. 1: The workpiece coordinates are calculated from the machine coordinates o...

  • Page 518

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 502 - #7 #6 #5 #4 #3 #2 #1 #0 SOKxOPSx MCExMCSx MWEx MWSx8164 SOKxOPSx MCExMCSx [Input type] Parameter input [Data type] Bit axis # 0 MWSx In automatic workpiece coordinate system setting, performed when composite control is started, a ...

  • Page 519

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 503 - # 3 MCEx In automatic workpiece coordinate system setting, performed when composite control is canceled: 0: A workpiece coordinate system is automatically set in the same way as normal. 1: The coordinate system of the other path subject to ax...

  • Page 520

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 504 - #7 #6 #5 #4 #3 #2 #1 #0 SPVxSWSxSWMxSGSxSGMx SYWx 8167 SPVx SYWx [Input type] Parameter input [Data type] Bit axis # 1 SYWx The axis is: 0: Not used as a master axis and slave axis at the same time. 1: Used as a master axis an...

  • Page 521

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 505 - # 6 SPVx At the end of synchronous control, automatic workpiece coordinate system setting for the slave axis is: 0: Not performed. 1: Performed. NOTE When a workpiece coordinate system is automatically set at the end of synchronous control,...

  • Page 522

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 506 - # 1 MSO When one of the following events occurs in synchronous control or composite control: • The emergency stop signal is turned off. • The servo-off signal is turned on. • A servo alarm is issued. 0: The synchronous or composite con...

  • Page 523

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 507 - # 6 WST When a workpiece coordinate system is automatically set up for a slave axis at the end of synchronous control, workpiece coordinate system presetting is: 0: Not performed. 1: Performed. NOTE This parameter is valid when the workpiec...

  • Page 524

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 508 - 8181 Synchronization error limit of each axis [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 99999999 When the synchronization deviation detected (bit 1 (SERx) of parameter No.8162...

  • Page 525

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 509 - 8184 Coordinates of the reference point of an axis on the coordinate system of another axis under composite control [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depen...

  • Page 526

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 510 - X1 = (Value specified for the X-axis of path 1) ± (Machine coordinate of X2) Plus when parameter MCDx (bit 6 of No.8162) of path 1 is set to 0 Minus when parameter MCDx (bit 6 of No.8162) of path 1 is set to 1 X2 = (Value specified for the X-a...

  • Page 527

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 511 - 8186 Master axis under superimposed control [Input type] Parameter input [Data type] Word axis [Valid data range] 101, 102, 103, . . . , (path number)*100+(intra-path relative axis number) (101, 102, 103, . . . , 201, 202, 203, . . . , 1001,...

  • Page 528

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 512 - 8191 F0 velocity of rapid traverse override of an axis under superimposed control [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment sy...

  • Page 529

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 513 - 4.60 PARAMETERS OF ANGULAR AXIS CONTROL #7 #6 #5 #4 #3 #2 #1 #0 8200 AZR AAC [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the power must be turned off before operation is cont...

  • Page 530

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 514 - # 6 A53 So far, if a slanted axis is singly specified by a machine coordinate command (G53) in angular axis control, this parameter set to 0 specifies that "compensation is applied to the Cartesian axis", and this parameter set to 1...

  • Page 531

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 515 - 8211 Axis number of a slanted axis subject to angular axis control 8212 Axis number of a Cartesian axis subject to slanted axis control NOTE When these parameters are set, the power must be turned off before operation is continued. [Input ...

  • Page 532

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 516 - 4.61 PARAMETERS OF AXIS SYNCHRONOUS CONTROL #7 #6 #5 #4 #3 #2 #1 #0 8301 SYA [Input type] Parameter input [Data type] Bit path # 4 SYA In the servo-off state in axis synchronous control, the limit of the difference between the ...

  • Page 533

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 517 - # 1 ATS In axis synchronous control, automatic setting for grid positioning is: 0: Not started 1: Started Set this parameter with a slave axis. NOTE When starting automatic setting for grid positioning, set ATS to 1. Upon the completion of ...

  • Page 534

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 518 - #7 #6 #5 #4 #3 #2 #1 #0 8304 SYE SMS SCA MVB CLP ADJ SSA [Input type] Parameter input [Data type] Bit axis # 0 SSA When the one-direction synchronization establishment function under axis synchronous control is used: 0: The axis with ...

  • Page 535

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 519 - # 5 SCA In axis synchronous control: 0: Synchronous operation is performed when the axis synchronous control manual feed selection signal SYNCJ or the axis synchronous control selection signal SYNC for slave axes is set to 1. 1: Synchronous ...

  • Page 536

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 520 - 8311 Axis number of master axis in axis synchronous control NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to Number of c...

  • Page 537

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 521 - 8312 Enabling/disabling mirror image in axis synchronous control [Input type] Parameter input [Data type] Word axis [Valid data range] -127 to 128 This parameter sets mirror image for the slave axis. When 100 or a more value is set with this...

  • Page 538

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 522 - 8323 Limit in positional deviation check in axis synchronous control [Input type] Parameter input [Data type] 2-word axis [Unit of data] Detection unit [Valid data range] 0 to 999999999 This parameter sets the maximum allowable difference b...

  • Page 539

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 523 - 8327 Torque difference alarm detection timer [Input type] Parameter input [Data type] 2-word axis [Unit of data] msec [Valid data range] 0 to 4000 This parameter sets a time from the servo preparation completion signal, SA <F000.6>, b...

  • Page 540

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 524 - 8332 Maximum allowable synchronization error for synchronization error excessive alarm 2 NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] 2-word axis [Uni...

  • Page 541

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 525 - 8336 Synchronization error compensation gain 2 for each axis [Input type] Parameter input [Data type] Word axis [Valid data range] 0 to 1024 This parameter sets synchronization error compensation gain 2 for synchronization error smooth suppr...

  • Page 542

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 526 - 4.62 PARAMETERS OF SEQUENCE NUMBER COMPARISON AND STOP 8341 Program number subject to comparison and stop [Input type] Setting input [Data type] 2-word path [Valid data range] 1 to 99999999 This parameter sets the program number, including ...

  • Page 543

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 527 - 4.63 PARAMETERS OF CHOPPING #7 #6 #5 #4 #3 #2 #1 #0 8360 CHF CVC ROV [Input type] Setting input [Data type] Bit path # 0 ROV As rapid traverse override for a section from the chopping start point to point R: 0: Chopping override ...

  • Page 544

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 528 - 8372 Chopping upper dead point [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, deg (input unit) [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 digit of minimum u...

  • Page 545

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 529 - 8376 Chopping compensation factor [Input type] Parameter input [Data type] Byte path [Unit of data] % [Valid data range] 0 to 100 The value obtained by multiply the sum of the servo delay in an chopping operation and the acceleration/decele...

  • Page 546

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 530 - 4.64 PARAMETERS OF AI CONTOUR CONTROL (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 8412 FDI HIK EST [Input type] Parameter input [Data type] Bit # 0 EST The simple NURBS interpolation start function is: 0: Disabled. 1: Enabled. # 1 HIK ...

  • Page 547

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 531 - 8456 Override for range 2 that is applied during deceleration according to the cutting load in AI contour control 8457 Override for range 3 that is applied during deceleration according to the cutting load in AI contour control 8458 Override...

  • Page 548

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 532 - 8465 Maximum allowable feedrate for AI contour control [Input type] Setting input [Data type] Real path [Unit of data] mm/min, inch/min, degree/min (input unit) [Minimum unit of data] Depend on the increment system of the reference axis [V...

  • Page 549

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 533 - 8490 Minimum travel distance of a block where smooth interpolation or Nano smoothing is applied [Input type] Setting input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of t...

  • Page 550

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 534 - 4.65 PARAMETERS OF HIGH-SPEED POSITION SWITCH (1 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 8500 HPE [Input type] Parameter input [Data type] Bit path # 7 HPE The maximum number of high-speed position switches is: 0: 6. 1: 16. #7 #6 #5 #...

  • Page 551

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 535 - #7 #6 #5 #4 #3 #2 #1 #0 8504 E08 E07 E06 E05 E04 E03 E02 E01 #7 #6 #5 #4 #3 #2 #1 #0 8505 E16 E15 E14 E13 E12 E11 E10 E09 [Input type] Parameter input [Data type] Bit path E01 to E16 These parameters specify whether to enable or di...

  • Page 552

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 536 - #7 #6 #5 #4 #3 #2 #1 #0 8512 A08 A07 A06 A05 A04 A03 A02 A01 #7 #6 #5 #4 #3 #2 #1 #0 8513 A16 A15 A14 A13 A12 A11 A10 A09 [Input type] Parameter input [Data type] Bit path A01 to A16 These parameters set the passing direction in wh...

  • Page 553

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 537 - 8565 Output address of the high-speed position switch signal NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 126 This p...

  • Page 554

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 538 - 8580 Maximum value of the operation range of the first high-speed position switch 8581 Maximum value of the operation range of the second high-speed position switch to 8589 Maximum value of the operation range of the tenth high-speed position...

  • Page 555

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 539 - 4.66 OTHER PARAMETERS #7 #6 #5 #4 #3 #2 #1 #0 8650 EKY CNA RSK [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. # 0...

  • Page 556

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 540 - 8661 Variable area size NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word path [Unit of data] KByte [Valid data range] 0 to 59(251) This parameter sp...

  • Page 557

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 541 - 8760 Program number of data input/output (Power Mate CNC manager) [Input type] Parameter input [Data type] 2-word path [Valid data range] 0 to 99999999 This parameter sets the program numbers of programs to be used for inputting and outputti...

  • Page 558

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 542 - 4.67 PARAMETERS OF MAINTENANCE #7 #6 #5 #4 #3 #2 #1 #0 8900 PWE [Input type] Setting input [Data type] Bit # 0 PWE The setting, from an external device and MDI panel, of those parameters that cannot be set by setting input is: ...

  • Page 559

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 543 - 4.68 PARAMETERS OF THE INCORRECT OPERATION PREVENTION FUNCTION 10000 Lower limit 1 of tool offsets No.01 to to 10019 Lower limit 1 of tool offsets No.20 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, degree (i...

  • Page 560

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 544 - 10040 Lower limit 2 of tool offsets No.01 to to 10059 Lower limit 1 of tool offsets No.20 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depend on the increment syste...

  • Page 561

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 545 - 10100 Upper limit 3 of tool offsets No.01 to to 10119 Upper limit 3 of tool offsets No.20 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depend on the increment syst...

  • Page 562

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 546 - 10140 Upper limit 4 of tool offsets No.01 to to 10159 Upper limit 4 of tool offsets No.20 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depend on the increment syste...

  • Page 563

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 547 - 10200 Lower limit 6 of tool offsets No.01 to to 10219 Lower limit 6 of tool offsets No.20 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depend on the increment syste...

  • Page 564

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 548 - 10260 Upper limit 1 of a tool offset number range No.01 to to 10279 Upper limit 1 of a tool offset number range No.20 [Input type] Parameter input [Data type] Word path [Valid data range] 0 to maximum number of offset sets Each of these pa...

  • Page 565

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 549 - 10288 Lower limit 8 of tool offsets No.01 to to 10291 Lower limit 8 of tool offsets No.04 [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depend on the increment syste...

  • Page 566

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 550 - 10300 Upper limit 2 of a tool offset number range No.01 to to 10303 Upper limit 2 of a tool offset number range No.04 [Input type] Parameter input [Data type] Word path [Valid data range] 0 to maximum number of offset sets Each of these pa...

  • Page 567

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 551 - 10316 Lower limit of a workpiece zero point offset range No.01 to to 10321 Lower limit of a workpiece zero point offset range No.06 [Input type] Parameter input [Data type] Word path [Valid data range] 0 to maximum number of offset sets Ea...

  • Page 568

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 552 - #7 #6 #5 #4 #3 #2 #1 #0 10330 ASD EBC MID HSC ADC PDC IIC [Input type] Parameter input [Data type] Bit # 0 IIC At the time of incremental input, a confirmation message is: 0: Displayed. 1: Not displayed. # 1 PDC At the time of pr...

  • Page 569

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 553 - 10332 Upper limit of external workpiece zero point offsets [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range]...

  • Page 570

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 554 - 4.69 PARAMETERS OF AUTOMATIC DATA BACKUP #7 #6 #5 #4 #3 #2 #1 #0 10340 EEB EIB AAP ABI ABP [Input type] Parameter input [Data type] Bit # 0 ABP Automatic data backup at power-on is: 0: Disabled. 1: Enabled. # 1 ABI Overwrite-p...

  • Page 571

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 555 - 10342 Number of backup data items [Input type] Parameter input [Data type] Byte [Unit of data] No unit [Valid data range] 0 to 3 This parameter sets the number of backup data items. If 0 is specified, backup is not performed.

  • Page 572

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 556 - 4.70 PARAMETERS OF PARALLEL AXIS CONTROL 10360 Bias value for the offset number of a tool offset for each axis [Input type] Setting input [Data type] Word axis [Valid data range] 0 to the number of tool offsets When parallel operation is ...

  • Page 573

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 557 - 4.71 PARAMETERS OF AXIS SWITCHING #7 #6 #5 #4 #3 #2 #1 #0 10370 RPC [Input type] Setting input [Data type] Bit path # 0 RPC When a return from the reference position (G29) is made, axis switching is: 0: Disabled. 1: Enabled. 1...

  • Page 574

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 558 - 4.73 PARAMETERS OF SCREEN DISPLAY COLORS (2 OF 2) 10421 RGB value of color palette 1 for text for color set 2 10422 RGB value of color palette 2 for text for color set 2 : 10435 RGB value of color palette 15 for text for color set 2 [Input...

  • Page 575

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 559 - 4.74 PARAMETERS OF WAVEFORM DIAGNOSIS Parameter Nos. 10600 to 10719 shown below hold initial values and values set through screen manipulations during waveform diagnosis. These parameters are set by the CNC. So, never input values from the param...

  • Page 576

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 560 - 4.75 PARAMETERS OF THREE-DIMENSIONAL ERROR COMPENSATION 10800 First compensation axis for three-dimensional error compensation 10801 Second compensation axis for three-dimensional error compensation 10802 Third compensation axis for three-d...

  • Page 577

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 561 - 10806 Compensation point number of the reference position for three-dimensional error compensation (first compensation axis) 10807 Compensation point number of the reference position for three-dimensional error compensation (second compensatio...

  • Page 578

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 562 - 10812 Compensation interval for three-dimensional error compensation (first compensation axis) 10813 Compensation interval for three-dimensional error compensation (second compensation axis) 10814 Compensation interval for three-dimensional ...

  • Page 579

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 563 - 4.76 PARAMETERS OF ROTATION AREA INTERFERENCE CHECK 10900 Axis number of the first axis of the plane on which group D is moved [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100...

  • Page 580

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 564 - 10902 Axis number of the rotary axis on which group D is rotated [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100+n (m:1 to the path number, n:1 to the number of controlled axes) ...

  • Page 581

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 565 - 10905 Maximum point of rectangle 1 of group D in the second axis 10906 Minimum point of rectangle 1 of group D in the second axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] ...

  • Page 582

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 566 - 10909 Maximum point of rectangle 2 of group D in the second axis 10910 Minimum point of rectangle 2 of group D in the second axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] ...

  • Page 583

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 567 - 10913 Maximum point of rectangle 3 of group D in the second axis 10914 Minimum point of rectangle 3 of group D in the second axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] ...

  • Page 584

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 568 - 10917 Maximum point of rectangle 4 of group D in the second axis 10918 Minimum point of rectangle 4 of group D in the second axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] ...

  • Page 585

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 569 - 10921 Reference angular displacement of the rotation axis of group D [Input type] Parameter input [Data type] Real [Unit of data] degree (machine unit) [Minimum unit of data] Depend on the increment system of the reference axis in the first...

  • Page 586

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 570 - 4.77 PARAMETERS OF SPINDLE CONTROL WITH SERVO MOTOR #7 #6 #5 #4 #3 #2 #1 #0 11000 SRV [Input type] Parameter input [Data type] Bit axis NOTE When this parameter is set, the power must be turned off before operation is continued. ...

  • Page 587

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 571 - #7 #6 #5 #4 #3 #2 #1 #0 11005 SIC [Input type] Parameter input [Data type] Bit # 0 SIC Spindle indexing is: 0: Performed based on absolute coordinates. 1: Performed based on machine coordinates. 11010 Spindle number used by sp...

  • Page 588

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 572 - 11012 Spindle indexing speed for each axis [Input type] Parameter input [Data type] Word axis [Unit of data] min-1 If 0 is set, the spindle indexing speed is assumed to be the setting of parameter No. 11020 (speed (S0) for switching accelera...

  • Page 589

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 573 - 11016 Time constant of acceleration/deceleration in SV speed control mode for each axis [Input type] Parameter input [Data type] Word axis [Unit of data] msec [Valid data range] 0 to 4000 In spindle control with servo motor or spindle contr...

  • Page 590

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 574 - 11021 Acceleration/deceleration switching speed (S1) for each axis [Input type] Parameter input [Data type] 2-word axis [Unit of data] min-1 [Valid data range] 0 to 99999999 In spindle control with servo motor or spindle control with Cs con...

  • Page 591

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 575 - 11032 Individual acceleration / deceleration 3 (Leg 3) [Input type] Parameter input [Data type] 2-word axis [Unit of data] min-1/s [Valid data range] 0 to 100000 In spindle control with servo motor or spindle control with Cs contour control...

  • Page 592

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 576 - 11051 Acceleration change time of bell-shaped acceleration/deceleration before interpolation in rigid tapping [Input type] Parameter input [Data type] 2-word path [Unit of data] msec [Valid data range] 0 to 200 Set an acceleration change ti...

  • Page 593

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 577 - 11060 Time constant for acceleration/deceleration after cutting feed interpolation in rigid tapping (first gear) 11061 Time constant for acceleration/deceleration after cutting feed interpolation in rigid tapping (second gear) 11062 Time con...

  • Page 594

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 578 - 11090 Path number with which the rotation of each spindle is specified [Input type] Parameter input [Data type] Byte spindle [Valid data range] 0 to 10 When a path is specified for spindle commands, this parameter sets a path number with whi...

  • Page 595

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 579 - 4.78 PARAMETERS OF WORKPIECE SETTING ERROR COMPENSATION #7 #6 #5 #4 #3 #2 #1 #0 11200 RCM [Input type] Setting input [Data type] Bit path # 0 RCM When workpiece setting error compensation is performed with a 5-axis machine, too...

  • Page 596

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 580 - 11202 Override for maximum cutting feedrate during workpiece setting error compensation mode [Input type] Parameter input [Data type] Byte path [Unit of data] % [Valid data range] 0 to 100 When the parameter RCM(No.11200#0)=1 in order to en...

  • Page 597

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 581 - 4.79 PARAMETERS OF TILTED WORKING PLANE COMMAND 11220 Minimum distance used for determining a plane when a tilted working plane command with three points is specified [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inc...

  • Page 598

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 582 - 4.80 PARAMETERS OF INCH/METRIC CONVERSION AND DIAMETER/RADIUS SWITCHING #7 #6 #5 #4 #3 #2 #1 #0 11222 PDM CIM NIM [Input type] Parameter input [Data type] Bit path # 0 NIM Automatic conversion of a coordinate system by an inch/met...

  • Page 599

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 583 - 4.81 PARAMETERS OF DI/DO (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 11223 OPS TRS [Input type] Parameter input [Data type] Bit path # 1 TRS In threading cycle retraction, when a block that specifies return to the start point of the thread...

  • Page 600

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 584 - 4.82 PARAMETERS OF FEEDRATE CONTROL AND ACCELERATION/DECELERATION CONTROL 11230 Distance to the 4th step in positioning by optimum acceleration for each axis D4 11231 Distance to the 4th step in positioning by optimum acceleration for each axi...

  • Page 601

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 585 - 4.83 PARAMETERS OF TOOL CENTER POINT CONTROL #7 #6 #5 #4 #3 #2 #1 #0 11260 TCS [Input type] Parameter input [Data type] Bit path # 0 TCS If bit 6 (TOS) of parameter No. 5006 is set to 0, tool center point control is canceled (G...

  • Page 602

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 586 - 4.84 PARAMETERS OF COORDINATE SYSTEM 11275 The top number of M code used to turn on each axis workpiece coordinate system preset signal [Input type] Parameter input [Data type] 2-word path [Valid data range] 1 to 999999999 Specify the top n...

  • Page 603

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 587 - #7 #6 #5 #4 #3 #2 #1 #0 11277 WPA [Input type] Parameter input [Data type] Bit path # 0 WPA When an M code for turning on the workpiece coordinate system preset signal for an axis is specified, but the signal is not turned on, o...

  • Page 604

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 588 - 4.85 PARAMETERS OF DISPLAY AND EDIT (2 OF 5) #7 #6 #5 #4 #3 #2 #1 #0 11300 MUC ATH MPH FPI ASH [Input type] Parameter input [Data type] Bit # 3 ASH When the actual feedrate is read with FOCAS2 and the PMC window: 0: Data that has...

  • Page 605

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 589 - # 7 MUC When the modal data are read with FOCAS2 and the PMC window: 0: Data that has been updated at conventional intervals (approximately 32 ms) is read. 1: Data that has been updated at short intervals is read. NOTE When quick response ...

  • Page 606

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 590 - # 5 PES After a program search operation is performed on the program list screen: 0: The cursor moves to a program on the list screen. 1: A specified program is selected as the main program, and the screen display changes to the edit screen. ...

  • Page 607

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 591 - #7 #6 #5 #4 #3 #2 #1 #0 11304 CFP ON8 GGD PGR [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. #0 PGR When the path selec...

  • Page 608

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 592 - 11305 Maximum number of simultaneously displayed axes NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 2 By setting this...

  • Page 609

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 593 - Display sequence of coordinates Setting 1 2 3 4 0 Relative coordinates Absolute coordinates Machine coordinates Remaining travel distance 1 Relative coordinates Machine coordinates Absolute coordinates Remaining travel distance 2 Relative coordin...

  • Page 610

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 594 - # 4 PGS In program search operation: 0: A specified program name is searched for. 1: An O number program is searched for with "O" omitted. # 5 SPH When the spindle speed data are read with FOCAS2 or the PMC window: 0: Data that...

  • Page 611

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 595 - 11310 Selection of a PMC that performs read and write operations with an external touch panel [Input type] Parameter input [Data type] Byte [Valid data range] 0 to 3 This parameter selects an PMC for read and write operations among three PMC...

  • Page 612

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 596 - 4.86 PARAMETERS OF EMBEDDED MACRO (1 OF 2) 11311 Password for embedded macro [Input type] Parameter input [Data type] 2-word [Valid date range] 0 to 99999999 The password to set the attribute of the folder for the embedded macro (MTB1 folde...

  • Page 613

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 597 - 4.87 PARAMETERS OF DISPLAY AND EDIT (3 OF 5) #7 #6 #5 #4 #3 #2 #1 #0 11318 RTC MLD POC [Input type] Parameter input [Data type] Bit #0 POC When the pattern data input function is used, on the custom macro screen a comment is: 0: ...

  • Page 614

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 598 - 11321 Spindle tool name (1st character) 11322 Spindle tool name (2nd character) 11323 Spindle tool name (3rd character) 11324 Spindle tool name (4th character) [Input type] Parameter input [Data type] Byte path [Valid data range] See t...

  • Page 615

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 599 - 4.88 PARAMETERS OF GRAPHIC DISPLAY (2 OF 4) #7 #6 #5 #4 #3 #2 #1 #0 11329 GST AER GTF BGMGTL [Input type] Parameter input [Data type] Bit path #2 GTL When animated simulation is performed with the dynamic graphic display function, ...

  • Page 616

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 600 - 11331 Screen center coordinate value in the drawing range in dynamic graphic display [Input type] Parameter input [Data type] Real axis [Unit of data] mm,inch (input unit) [Minimum unit of data] Depend on the increment system of the applied...

  • Page 617

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 601 - 11337 Color of the cursor indicating the tool position on the PATH GRAPHIC (TOOL POSITION) screen of dynamic graphic display [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 7 This parameter sets the color of the cu...

  • Page 618

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 602 - 11344 Blank reference position in dynamic graphic display [Input type] Parameter input [Data type] Real axis [Unit of data] mm,inch (input unit) [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 9...

  • Page 619

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 603 - #7 #6 #5 #4 #3 #2 #1 #0 11349 WNSGSP ABC [Input type] Parameter input [Data type] Bit # 1 ABC In animated simulation in the dynamic graphic display function, when a fine boring cycle or back boring cycle, which is a hole machining...

  • Page 620

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 604 - 4.89 PARAMETERS OF DISPLAY AND EDIT (4 OF 5) #7 #6 #5 #4 #3 #2 #1 #0 11353 SEK [Input type] Parameter input [Data type] Bit #0 SEK When the power is turned on, or when the clear state is present, sequence numbers are: 0: Not ma...

  • Page 621

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 605 - 4.91 PARAMETERS OF PROGRAMS (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 11600 D3IT [Input type] Parameter input [Data type] Bit path # 2 D3IT In the three-dimensional coordinate system conversion mode, the valid interlock signals (interloc...

  • Page 622

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 606 - 4.92 PARAMETERS OF SERVO (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 11802 SWF CPY [Input type] Parameter input [Data type] Bit axis NOTE When at least one of these parameters is set, the power must be turned off before operation is continued...

  • Page 623

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 607 - # 1 CDP Dual position feedback compensation clamping is: 0: Not performed. 1: Performed. NOTE Before the dual position feedback compensation clamp function can be used, a setting to enable dual position feedback is required in addition to t...

  • Page 624

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 608 - 4.93 PARAMETERS OF PMC 11900 PMC of execution order 1 in the multi-PMC function 11901 PMC of execution order 2 in the multi-PMC function 11902 PMC of execution order 3 in the multi-PMC function NOTE When these parameters are set, the powe...

  • Page 625

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 609 - 11905 Execution time percentage (%) of PMC of execution order 1 in the multi-PMC function 11906 Execution time percentage (%) of PMC of execution order 2 in the multi-PMC function 11907 Execution time percentage (%) of PMC of execution order...

  • Page 626

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 610 - 11910 I/O Link channel 1 input/output addresses 11911 I/O Link channel 2 input/output addresses 11912 I/O Link channel 3 input/output addresses 11913 I/O Link channel 4 input/output addresses NOTE When these parameters are set, the power...

  • Page 627

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 611 - 11915 Input/output addresses of the second block of I/O Link channel 1 11916 Input/output addresses of the second block of I/O Link channel 2 11917 Input/output addresses of the second block of I/O Link channel 3 11918 Input/output addres...

  • Page 628

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 612 - 11920 Input/output addresses of NC-PMC interface 1 11921 Input/output addresses of NC-PMC interface 2 11922 Input/output addresses of NC-PMC interface 3 11923 Input/output addresses of NC-PMC interface 4 11924 Input/output addresses of N...

  • Page 629

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 613 - Setting valueInput/output address 105 F5000to5767 / G5000to5767 of the first PMC 106 F6000to6767 / G6000to6767 of the first PMC 107 F7000to7767 / G7000to7767 of the first PMC 108 F8000to8767 / G8000to8767 of the first PMC 109 F9000to9767 / G9000t...

  • Page 630

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 614 - 11930 Execution interval of ladder level 1 NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte [Valid data range] 0, 4 ,8 This parameter sets the execut...

  • Page 631

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 615 - 11932 Interface between PMCs NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Byte [Valid data range] 0, 1, 2, 3 This parameter sets the PMCs that use the...

  • Page 632

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 616 - Setting Meaning 0 The PMC memory set as the standard setting is used. 1 PMC memory A is used. 2 PMC memory B is used. 3 PMC memory C is used. -1 The 2nd and 3rd PMCs share the PMC memory with the 1st PMC. In the standard settings, the following...

  • Page 633

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 617 - 4.94 PARAMETERS OF EMBEDDED MACRO (2 OF 2) 12020 G code number for the embedded macro (first) 12023 G code number for the embedded macro (second) 12026 G code number for the embedded macro (third) 12029 G code number for the embedded macr...

  • Page 634

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 618 - 12022 Number of G code macro for embedded macro (first) 12025 Number of G code macro for embedded macro (second) 12028 Number of G code macro for embedded macro (third) 12031 Number of G code macro for embedded macro (fourth) 12034 Numbe...

  • Page 635

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 619 - 4.95 PARAMETERS OF HIGH-SPEED POSITION SWITCH (2 OF 2) 12201 Controlled axis for which the eleventh high-speed position switch function is performed 12202 Controlled axis for which the twelfth high-speed position switch function is performed ...

  • Page 636

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 620 - 12221 Maximum value of the operation range of the eleventh high-speed position switch 12222 Maximum value of the operation range of the twelfth high-speed position switch 12223 Maximum value of the operation range of the thirteenth high-spee...

  • Page 637

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 621 - 12241 Minimum value of the operation range of the eleventh high-speed position switch 12242 Minimum value of the operation range of the twelfth high-speed position switch 12243 Minimum value of the operation range of the thirteenth high-spee...

  • Page 638

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 622 - 4.96 PARAMETERS OF MALFUNCTION PROTECTION 12255 Maximum servo motor speed [Input type] Parameter input [Data type] Real axis [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system o...

  • Page 639

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 623 - 4.97 PARAMETERS OF MANUAL HANDLE (2 OF 2) 12300 X address of the 1st. manual pulse generator 12301 X address of the 2nd. manual pulse generator 12302 X address of the 3rd. manual pulse generator 12303 X address of the 4th. manual pulse ge...

  • Page 640

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 624 - 12310 States of the manual handle feed axis selection signals when tool axis direction handle feed/interrupt and table-based vertical direction handle feed/interrupt are performed [Input type] Parameter input [Data type] Byte path [Valid dat...

  • Page 641

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 625 - 12311 States of the manual handle feed axis selection signals when a movement is made in the first axis direction in tool axis normal direction handle feed/interrupt and table-based horizontal direction handle feed/interrupt [Input type] Para...

  • Page 642

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 626 - 12313 States of the manual handle feed axis selection signals when the first rotation axis is turned in tool tip center rotation handle feed/interrupt [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to 24 This paramet...

  • Page 643

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 627 - #7 #6 #5 #4 #3 #2 #1 #0 12320 JFR FLL TWD [Input type] Parameter input [Data type] Bit path # 0 TWD The directions of three-dimensional machining manual feed (other than tool tip center rotation feed) when the tilted working plane...

  • Page 644

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 628 - 12322 Angle used to determine whether to assume the tool axis direction to be parallel to the normal direction (parameter No. 12321) [Input type] Parameter input [Data type] Real path [Unit of data] deg [Minimum unit of data] Depend on the...

  • Page 645

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 629 - #7 #6 #5 #4 #3 #2 #1 #0 12330 G17 G16 G15 G14 G13 G12 G11 G10 #7 #6 #5 #4 #3 #2 #1 #0 12331 G1F G1E G1D G1C G1B G1A G19 G18 #7 #6 #5 #4 #3 #2 #1 #0 12332 G27 G26 G25 G24 G23 G22 G21 G20 #7 #6 #5 #4 #3 #2 #1 #0 12333 G2F G2E G2D G2C G2...

  • Page 646

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 630 - 12340 PMC path of the 1st. manual pulse generator connected with I/O Link 12341 PMC path of the 2nd. manual pulse generator connected with I/O Link 12342 PMC path of the 3rd. manual pulse generator connected with I/O Link 12343 PMC path of...

  • Page 647

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 631 - 4.98 PARAMETERS OF SYNCHRONOUS/COMPOSITE CONTROL AND SUPERIMPOSED CONTROL (2 OF 2) 12600 Identification Number for synchronous, composite and superimposed control with program command [Input type] Parameter input [Data type] Word axis [Vali...

  • Page 648

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 632 - 4.99 PARAMETERS OF AXIS CONTROL BY PMC (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 12730 PTC [Input type] Parameter input [Data type] Bit path # 0 PTC Linear acceleration/deceleration time constant of continuous feed operation based on a ...

  • Page 649

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 633 - 12733 4th time constant of linear acceleration/deceleration of continuous feed operation based on a speed command in PMC axis control [Input type] Parameter input [Data type] Word axis [Unit of data] msec/1000min-1 [Valid data range] 0 to 3...

  • Page 650

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 634 - 12736 2nd feedrate for changing time constant of continuous feed operation based on a speed command in PMC axis control [Input type] Parameter input [Data type] Word axis [Unit of data] min-1 [Valid data range] 0 to 32767 Set feedrate param...

  • Page 651

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 635 - 4.100 PARAMETERS OF EXTERNAL DECELERATION POSITIONS EXPANSION #7 #6 #5 #4 #3 #2 #1 #0 12750 EX5 EX4 [Input type] Parameter input [Data type] Bit path # 0 EX4 External deceleration function setting 4 is: 0: Disabled. 1: Enabled. ...

  • Page 652

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 636 - 12754 External deceleration rate setting 5 in cutting feed [Input type] Parameter input [Data type] Real path [Unit of data] mm/min, inch/min, degree/min (machine unit) [Minimum unit of data] Depend on the increment system of the reference ...

  • Page 653

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 637 - 4.101 PARAMETERS OF DISPLAY AND EDIT (5 OF 5) #7 #6 #5 #4 #3 #2 #1 #0 13101 CSC TPB [Input type] Parameter input [Data type] Bit NOTE When at least one of these parameters is set, the power must be turned off before operation is co...

  • Page 654

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 638 - #7 #6 #5 #4 #3 #2 #1 #0 13102 EDT BGI BGD [Input type] Parameter input [Data type] Bit path NOTE When at least one of these parameters is set, the powermust be turned off before operation is continued. # 5 BGD When the backgroun...

  • Page 655

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 639 - #7 #6 #5 #4 #3 #2 #1 #0 13112 NTD NTA SPI SVI IDW [Input type] Parameter input [Data type] Bit path # 0 IDW Editing on the servo or spindle information screen is: 0: Prohibited. 1: Not prohibited. # 1 SVI The servo information...

  • Page 656

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 640 - #7 #6 #5 #4 #3 #2 #1 #0 13114 P15 [Input type] Parameter input [Data type] Bit # 0 P15 When the screen is displayed using the CNC screen display function: 0: The 10.4” mode is used. 1: The 15” mode is used. NOTE This param...

  • Page 657

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 641 - # 6 KBC With the standard ONGP-MDI unit, in the lowercase input mode, "[" and "]" are: 0: Not converted to "<" and ">", respectively. 1: Converted to "<" and ">", respect...

  • Page 658

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 642 - 13132 Simultaneous multi-path display order number [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to number of paths included in a simultaneous multi-path display group This parameter sets the display order of a path...

  • Page 659

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 643 - 4.102 PARAMETERS OF TOOL MANAGEMENT FUNCTIONS (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 13200 NFD NAM T0O TP2 ETE TRT THN TCF [Input type] Parameter input [Data type] Bit path # 0 TCF When a T code is specified with the tool management functio...

  • Page 660

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 644 - # 7 NFD When a T code is specified, but a valid tool with a remaining lifetime cannot be found in the cartridge: 0: The spindle position and standby position are also searched. 1: The spindle position and standby position are not searched. ...

  • Page 661

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 645 - #7 #6 #5 #4 #3 #2 #1 #0 13202 DOMDOT DO2 DOB DOY DCR [Input type] Parameter input [Data type] Bit # 1 DCR On the tool management function screen, tool nose radius compensation data is: 0: Displayed. 1: Not displayed. NOTE This para...

  • Page 662

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 646 - # 7 DOM On the tool management function screen, the tool offset data of the M series is: 0: Displayed. 1: Not displayed. NOTE This parameter is valid when the machine control type is the machining center system or compound system. #7 #6 ...

  • Page 663

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 647 - # 7 TCN Tool life count operation is triggered by: 0: M06/restart M code. (A T code alone does not start counting.) 1: T code. (Count operation is not started by M06.) #7 #6 #5 #4 #3 #2 #1 #0 13204 DTA ATA TDL [Input type] Paramet...

  • Page 664

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 648 - 13221 M code for tool life count restart [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 65535 When 0 is set in this parameter, this parameter is ignored. When an M code for tool life count restart is specified, th...

  • Page 665

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 649 - 13223 Start pot number of the first cartridge NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word [Valid data range] 1 to 9999 This parameter sets the s...

  • Page 666

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 650 - 13233 Start pot number of the third cartridge NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word [Valid data range] 1 to 9999 This parameter sets the s...

  • Page 667

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 651 - #7 #6 #5 #4 #3 #2 #1 #0 13240 MT4 MT3 MT2 MT1 NOTE When at least one of these parameters is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Bit system common # 0 MT1 The f...

  • Page 668

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 652 - 13242 Number of columns of the first cartridge (when the cartridge is of the matrix type) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word [Valid dat...

  • Page 669

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 653 - 13244 Number of columns of the second cartridge (when the cartridge is of the matrix type) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word [Valid da...

  • Page 670

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 654 - 13246 Number of columns of the third cartridge (when the cartridge is of the matrix type) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word [Valid dat...

  • Page 671

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 655 - 13248 Number of columns of the fourth cartridge (when the cartridge is of the matrix type) NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Word [Valid da...

  • Page 672

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 656 - 13252 M code for specifying a particular tool [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 65535 This parameter sets not a tool type number but an M code for directly specifying the T code of a particular tool. ...

  • Page 673

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 657 - 4.103 PARAMETERS OF TOOL LIFE MANAGEMENT (2 OF 2) 13221 M code for tool life count restart [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 255 (not including 01, 02, 30, 98, and 99) When 0 is set, this parameter ...

  • Page 674

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 658 - 4.104 PARAMETERS OF STRAIGHTNESS COMPENSATION (2 OF 2) 13301 Straightness compensation: Compensation point number a of moving axis 4 to to 13304 Straightness compensation: Compensation point number d of moving axis 4 13311 Straightness com...

  • Page 675

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 659 - 13381 Number of a straightness compensation point located at the most negative position of moving axis 1 13382 Number of a straightness compensation point located at the most negative position of moving axis 2 13383 Number of a straightness...

  • Page 676

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 660 - 13391 Compensation magnification for moving axis 1 in straightness compensation 13392 Compensation magnification for moving axis 2 in straightness compensation 13393 Compensation magnification for moving axis 3 in straightness compensation ...

  • Page 677

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 661 - 4.105 PARAMETERS OF FLEXIBLE SYNCHRONOUS CONTROL (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 13421 FRF [Input type] Parameter input [Data type] Bit path # 2 FRF When G27, G28, G29, G30, G30.1, or G53 is specified during flexible synchro...

  • Page 678

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 662 - 4.106 PARAMETERS OF MANUAL LINER/CIRCULAR INTERPOLATION 13541 The head address of the R signal used by the input data in the manual linear/circular interpolation [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 79...

  • Page 679

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 663 - 13542 Head address of the R signal used by the output data in the manual linear/circular interpolation [Input type] Parameter input [Data type] Word path [Valid data range] 0 to 7999 The head address of the internal relay(R signal) of PMC u...

  • Page 680

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 664 - 4.107 PARAMETERS OF THE MACHINING CONDITION SELECTION FUNCTION #7 #6 #5 #4 #3 #2 #1 #0 13600 MSA MCR [Input type] Parameter input [Data type] Bit path # 0 MCR When an allowable acceleration rate adjustment is made with the machi...

  • Page 681

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 665 - 13610 Acceleration rate for acceleration/deceleration before look-ahead interpolation in AI contour control (precision level 1) 13611 Acceleration rate for acceleration/deceleration before look-ahead interpolation in AI contour control (precis...

  • Page 682

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 666 - 13614 Allowable acceleration rate change amount for each axis in speed control based on acceleration rate change under control on the rate of change of acceleration (precision level 1) 13615 Allowable acceleration rate change amount for each a...

  • Page 683

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 667 - 13616 Allowable acceleration rate change amount for each axis in speed control based on acceleration rate change under control on the rate of change of acceleration in successive linear interpolation operations (precision level 1) 13617 Allowab...

  • Page 684

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 668 - 13618 Rate of change time of the rate of change of acceleration in smooth bell-shaped acceleration/deceleration before interpolation when AI contour control is used (precision level 1) 13619 Rate of change time of the rate of change of acceler...

  • Page 685

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 669 - 13622 Time constant for acceleration/deceleration after interpolation when AI contour control is used (precision level 1) 13623 Time constant for acceleration/deceleration after interpolation when AI contour control is used (precision level 10...

  • Page 686

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 670 - 13628 Parameter number corresponding to arbitrary item 1 when AI contour controlis used 13629 Parameter number corresponding to arbitrary item 2 when AI contour controlis used NOTE When these parameters are set, the power must be turned off ...

  • Page 687

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 671 - 13634 Precision level currently selected when AI contour control is used [Input type] Parameter input [Data type] Byte path [Valid data range] 1 to 10 This parameter sets the level currently selected. 13662 Acceleration rate change time (b...

  • Page 688

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 672 - 4.108 PARAMETERS OF LINEAR SCALE WITH ABSOLUTE ADDRESS REFERENCE POSITION 14010 Maximum allowable travel distance when the reference position is established for a linear scale with an absolute address reference position [Input type] Parameter ...

  • Page 689

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 673 - 4.109 PARAMETERS OF FSSB 14340 ATR value corresponding to slave 01 on FSSB line 1 14341 ATR value corresponding to slave 02 on FSSB line 1 : 14357 ATR value corresponding to slave 18 on FSSB line 1 NOTE When these parameters are set, the p...

  • Page 690

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 674 - Example of axis configuration and parameter settings - Example 1 1021324354664758-569 to 18-96Slave numberATR No.14340 to 14357 X A Y Z B (M1) C (M2) (None) Axis 1 X 1 2 Y 3 3 Z 4 4 A 2 5 B 5 6 C 6 Controlled axis number Program axis name No....

  • Page 691

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 675 - - Example 2 Example of axis configuration and parameter settings when the electronic gear box (EGB) function is used (EGB slave axis: A-axis, EGB dummy axis: B-axis) 10 21 32 44 55 664 7-56 83 Slave numberATR No.14340 to 14357 XYAZC(M1)(M2)B(Du...

  • Page 692

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 676 - 14358 ATR value corresponding to slave 01 on FSSB line 2 14359 ATR value corresponding to slave 02 on FSSB line 2 : 14375 ATR value corresponding to slave 18 on FSSB line 2 NOTE When these parameters are set, the power must be turned off be...

  • Page 693

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 677 - 14376 ATR value corresponding to connector 1 on the first separate detector interface unit 14377 ATR value corresponding to connector 2 on the first separate detector interface unit : 14383 ATR value corresponding to connector 8 on the first ...

  • Page 694

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 678 - 14408 ATR value corresponding to slave 01 on an additional axis board 14409 ATR value corresponding to slave 02 on an additional axis board : 14425 ATR value corresponding to slave 18 on an additional axis board NOTE When these parameters ...

  • Page 695

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 679 - 14444 ATR value corresponding to connector 1 on the first separate detector interface unit connected to an additional axis board 14445 ATR value corresponding to connector 2 on the first separate detector interface unit connected to an additio...

  • Page 696

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 680 - #7 #6 #5 #4 #3 #2 #1 #0 14476 2AX NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Bit # 1 2AX Servo software 90Dx series for servo HRV4 cont...

  • Page 697

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 681 - 4.110 PARAMETERS OF SERVO GUIDE Mate Parameter Nos. 14500 to 14637 shown below hold initial values and values set by screen operations in SERVO GUIDE Mate. These parameters are set by the CNC. So, never input values from the parameter screen. ...

  • Page 698

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 682 - 4.111 PARAMETERS OF GRAPHIC DISPLAY (3 OF 4) 14706 Directions of the axes of the machine [Input type] Parameter input [Data type] Byte path [Valid data range] 16 to 20 When the dynamic graphic display function is used, the directions of the...

  • Page 699

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 683 - 14715 Unit of vertical movement when a movement is made with the dynamic graphic display function [Input type] Parameter input [Data type] Word [Valid data range] 0 to 255 This parameter sets the unit of vertical movement (in dots) applied ...

  • Page 700

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 684 - 4.112 PARAMETERS OF EMBEDDED ETHERNET #7 #6 #5 #4 #3 #2 #1 #0 14880 DHC DNS UNM D1E PCH ETH [Input type] Setting input [Data type] Bit # 0 ETH The embedded Ethernet function (a built-in port or PCMCIA LAN card) is: 0: Used. 1: Not u...

  • Page 701

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 685 - # 6 DHC With a built-in port, the DHCP client function is: 0: Not used. 1: Used. #7 #6 #5 #4 #3 #2 #1 #0 14882 UNS [Input type] Setting input [Data type] Bit # 4 UNS In the CNC Unsolicited Messaging function of a built-in p...

  • Page 702

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 686 - 4.113 PARAMETERS OF ROTATION AREA INTERFERENCE CHECK #7 #6 #5 #4 #3 #2 #1 #0 14900 IC4 IC3IC2IC1IRBIRA IB2 IB1 [Input type] Parameter input [Data type] Bit #0 IB1 Movement direction of group B (the first axis) 0: The direction of mov...

  • Page 703

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 687 - #4 to #7 IC1 to IC4 Processing time required to make the interference check The processing time is a multiple of 8. If the calculated value of the processing time is smaller than 8, the processing time is assumed to be 8 msec. Setting IC4 IC3 I...

  • Page 704

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 688 - #7 #6 #5 #4 #3 #2 #1 #0 14902 IRDIRCIDA2IDA1 ICA2 ICA1 [Input type] Parameter input [Data type] Bit #0 ICA1 Movement direction of group C (the first axis) 0: The direction of movement along the first axis of the group-C movement plan...

  • Page 705

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 689 - #5 IRD Rotation direction of the rotation axis on which group D is rotated 0: The direction of a rotation from the positive side of the first axis of the plane to the positive side of the second axis is assumed to be the positive direction o...

  • Page 706

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 690 - 14910 Axis number of the first axis of the plane on which group A is moved [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100+n (m:1 to the path number, n:1 to the number of cont...

  • Page 707

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 691 - 14911 Axis number of the second axis of the plane on which group A is moved [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100+n (m:1 to the path number, n:1 to the number of contro...

  • Page 708

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 692 - 14913 Axis number of the first axis of the plane on which group B is moved [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100+n (m:1 to the path number, n:1 to the number of con...

  • Page 709

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 693 - 14915 Axis number of the rotary axis on which group B is rotated [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100+n (m:1 to the path number, n:1 to the number of controlled axes) ...

  • Page 710

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 694 - 14917 Axis number of the second axis of the plane on which group C is moved [Input type] Parameter input [Data type] Word [Valid data range] 0 to the number of controlled axes or m×100+n (m:1 to the path number, n:1 to the number of contro...

  • Page 711

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 695 - 14920 Maximum point of rectangle 1 of group A in the first axis 14921 Minimum point of rectangle 1 of group A in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 712

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 696 - 14924 Maximum point of rectangle 2 of group A in the first axis 14925 Minimum point of rectangle 2 of group A in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 713

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 697 - 14928 Maximum point of rectangle 3 of group A in the first axis 14929 Minimum point of rectangle 3 of group A in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 714

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 698 - 14932 Maximum point of rectangle 4 of group A in the first axis 14933 Minimum point of rectangle 4 of group A in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 715

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 699 - 14936 Rotation center in the first axis when group-A is rotated 14937 Rotation center in the second axis when group-A is rotated [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] De...

  • Page 716

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 700 - 14940 Maximum point of rectangle 1 of group B in the first axis 14941 Minimum point of rectangle 1 of group B in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 717

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 701 - 14944 Maximum point of rectangle 2 of group B in the first axis 14945 Minimum point of rectangle 2 of group B in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 718

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 702 - 14948 Maximum point of rectangle 3 of group B in the first axis 14949 Minimum point of rectangle 3 of group B in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 719

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 703 - 14952 Maximum point of rectangle 4 of group B in the first axis 14953 Minimum point of rectangle 4 of group B in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 720

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 704 - 14956 Rotation center in the first axis when group-B is rotated 14957 Rotation center in the second axis when group-B is rotated [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] De...

  • Page 721

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 705 - 14960 Maximum point of rectangle 1 of group C in the first axis 14961 Minimum point of rectangle 1 of group C in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 722

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 706 - 14964 Maximum point of rectangle 2 of group C in the first axis 14965 Minimum point of rectangle 2 of group C in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch(machine unit) [Minimum unit of data] Dep...

  • Page 723

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 707 - 14968 Maximum point of rectangle 3 of group C in the first axis 14969 Minimum point of rectangle 3 of group C in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] De...

  • Page 724

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 708 - 14972 Maximum point of rectangle 4 of group C in the first axis 14973 Minimum point of rectangle 4 of group C in the first axis [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] De...

  • Page 725

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 709 - 14976 Rotation center in the first axis when group-C is rotated 14977 Rotation center in the second axis when group-C is rotated [Input type] Parameter input [Data type] Real [Unit of data] mm, inch (machine unit) [Minimum unit of data] D...

  • Page 726

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 710 - 4.114 PARAMETERS OF PERIODICAL SECONDARY PITCH COMPENSATION 14985 Number of the periodical secondary pitch compensation position at the extremely negative position for each axis NOTE When this parameter is set, the power must be turned off be...

  • Page 727

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 711 - 14988 Magnification for periodical secondary pitch error compensation for each axis NOTE When this parameter is set, the power must be turned off before operation is continued. [Input type] Parameter input [Data type] Integer axis [Valid d...

  • Page 728

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 712 - 4.115 PARAMETERS OF MANUAL HANDLE RETRACE (2 OF 2) 18060 M code that prohibits backward movement [Input type] Parameter input [Data type] Word path [Valid data range] 1 to 999 When an M code that prohibits backward movement is specified dur...

  • Page 729

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 713 - 4.116 PARAMETERS OF AI CONTOUR CONTROL (2 OF 2) #7 #6 #5 #4 #3 #2 #1 #0 19500 FCC FNW [Input type] Parameter input [Data type] Bit path # 6 FNW When the feedrate is determined according to the feedrate difference and acceleratio...

  • Page 730

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 714 - #7 #6 #5 #4 #3 #2 #1 #0 19501 FRP [Input type] Parameter input [Data type] Bit path # 5 FRP Linear rapid traverse is: 0: Acceleration/deceleration after interpolation 1: Acceleration/deceleration before interpolation Set a maxim...

  • Page 731

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 715 - #7 #6 #5 #4 #3 #2 #1 #0 19515 ZG2 BEX [Input type] Parameter input [Data type] Bit path # 0 BEX When the tapping mode (G63) or a canned cycle is specified, the mode for acceleration/deceleration before look-ahead interpolation is...

  • Page 732

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 716 - 4.117 PARAMETERS OF CYLINDRICAL INTERPOLATION #7 #6 #5 #4 #3 #2 #1 #0 19530 CYS CYA [Input type] Parameter input [Data type] Bit path # 5 CYA Specifies whether to perform cylindrical interpolation cutting point compensation in t...

  • Page 733

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 717 - 19534 Limit for changing cylindrical interpolation cutting point compensation in a single block [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of data] Depend on the increment system of...

  • Page 734

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 718 - 19535 Limit of travel distance moved with the cylindrical interpolation cutting point compensation in the previous block unchanged. [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (input unit) [Minimum unit of dat...

  • Page 735

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 719 - 4.118 PARAMETERS OF OPTIMAL TORQUE ACCELERATION/DECELERATION #7 #6 #5 #4 #3 #2 #1 #0 19540 FAP [Input type] Parameter input [Data type] Bit path # 0 FAP Optimal torque acceleration/deceleration is: 0: Disabled. 1: Enabled. When...

  • Page 736

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 720 - CAUTION When an acceleration pattern is set, setting a high acceleration rate immediately after a speed of 0 can cause an impact on the machine, so it is not desirable. Therefore, be sure to apply a relatively low acceleration rate at a speed o...

  • Page 737

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 721 - 19545 Optimal torque acceleration/deceleration (acceleration at P0 during movement in + direction and acceleration) 19546 Optimal torque acceleration/deceleration (acceleration at P1 during movement in + direction and acceleration) 19547 Opt...

  • Page 738

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 722 - 19562 Optimal torque acceleration/deceleration (acceleration at P5 during movement in + direction and deceleration) 19563 Optimal torque acceleration/deceleration (acceleration at P0 during movement in - direction and deceleration) 19564 Opt...

  • Page 739

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 723 - 4.119 PARAMETERS OF NANO SMOOTHING 19581 Tolerance smoothing for nano smoothing [Input type] Setting input [Data type] Real path [Unit of data] mm, inch, degree (input unit) [Minimum unit of data] Depend on the increment system of the appl...

  • Page 740

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 724 - 4.120 PARAMETERS OF TOOL COMPENSATION (3 OF 3) #7 #6 #5 #4 #3 #2 #1 #0 19604 TPC [Input type] Setting input [Data type] Bit path # 5 TPC In the case that there is no address P at the start of tool center point control (G43.4/G4...

  • Page 741

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 725 - # 3 WCD This parameter specify a direction of compensation vector by a sign of offset value in geinding-wheel wear compensation Offset vale by D code Minus Plus 0Direction from compensation center to command end position. Direction from comm...

  • Page 742

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 726 - # 6 NAA When the interference check avoidance function considers that an avoidance operation is dangerous or that a further interference to the interference avoidance vector occurs: 0: An alarm is issued. When an avoidance operation is consid...

  • Page 743

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 727 - # 5 PRI Among multiple end point candidates that exist when a movement is made on a rotation axis by a command such as I, J, and K when a slanted surface machining command is specified under tool center point control (type 2) or three-dimensi...

  • Page 744

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 728 - 19625 Number of blocks to be read in the cutter compensation/tool nose radius compensation mode [Input type] Setting input [Data type] Byte path [Valid data range] 3 to 8 This parameter sets the number of blocks to be read in the cutter comp...

  • Page 745

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 729 - 19631 Variation for determining an angle when the leading-edge offset function is performed [Input type] Parameter input [Data type] Real axis [Unit of data] degree [Minimum unit of data] Depend on the increment system of the reference axis...

  • Page 746

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 730 - 19635 Angle used as a criterion for the interference check in three-dimensional cutter compensation [Input type] Setting input [Data type] Real axis [Unit of data] degree [Minimum unit of data] Depend on the increment system of the referenc...

  • Page 747

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 731 - 4.121 PARAMETERS OF 5-AXIS MACHINING FUNCTION #7 #6 #5 #4 #3 #2 #1 #0 19650 RAP RAM [Input type] Parameter input [Data type] Bit axis # 0 RAM For a tool axis direction tool length compensation function, rotation axes are: 0: Not...

  • Page 748

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 732 - 19655 Axis number of the linear axis to which a rotation axis belongs [Input type] Parameter input [Data type] Byte axis [Valid data range] 0 to Number to controlled axes Set this parameter to use the tool axis direction tool length compensa...

  • Page 749

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 733 - 19657 Master rotation axis number [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Number to controlled axes When a machine does not have the rotation axis that rotates about the tool axis, this parameter sets the a...

  • Page 750

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 734 - 19658 Angular displacement of a rotation axis [Input type] Parameter input [Data type] Real axis [Unit of data] deg [Minimum unit of data] Depend on the increment system of the applied axis [Valid data range] 9 digit of minimum unit of dat...

  • Page 751

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 735 - 19661 Rotation center compensation vector in tool axis direction tool length compensation [Input type] Parameter input [Data type] Real axis [Unit of data] mm, inch (machine unit) [Minimum unit of data] Depend on the increment system of the...

  • Page 752

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 736 - #7 #6 #5 #4 #3 #2 #1 #0 19665 ETH SVC SPR [Input type] Parameter input [Data type] Bit path # 4 SPR The controlled point is shifted by: 0: Automatic calculation. 1: Using parameter No. 19667. Bit 5 (SVC) of parameter No. 19665 Bi...

  • Page 753

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 737 - # 7 ETH The tool holder offset function in tool length compensation is: 0: Disabled. 1: Enabled. 19666 Tool holder offset value [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (machine unit) [Minimum unit of...

  • Page 754

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 738 - 19680 Mechanical unit type [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 21 Specify the type of the mechanical unit. Parameter No. 19680 Mechanical unit type Controlled rotation axis Master and slave 0 Mechanism...

  • Page 755

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 739 - 19681 Controlled-axis number for the first rotation axis [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to Number of controlled axes Set the controlled-axis number for the first rotation axis. For a hypothetical axis...

  • Page 756

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 740 - 19683 Inclination angle when the first rotation axis is an inclined axis [Input type] Parameter input [Data type] Real path [Unit of data] Degree [Minimum unit of data] The increment system of the reference axis is to be followed. [Valid d...

  • Page 757

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 741 - 19685 Rotation angle when the first rotation axis is a hypothetical axis [Input type] Parameter input [Data type] Real path [Unit of data] Degree [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range...

  • Page 758

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 742 - 19688 Inclination angle when the second rotation axis is inclined [Input type] Parameter input [Data type] Real path [Unit of data] Degree [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 dig...

  • Page 759

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 743 - #7 #6 #5 #4 #3 #2 #1 #0 19696 RFC WKP NPC IA2 IA1 [Input type] Parameter input [Data type] Bit path # 0 IA1 0: The first rotation axis is an ordinary rotation axis. 1: The first rotation axis is a hypothetical axis. If IA1 is 1, set...

  • Page 760

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 744 - 19697 Reference tool axis direction [Input type] Parameter input [Data type] Byte path [Valid data range] 0 to 3 Set the tool axis direction in the machine coordinate system when the rotation axes for controlling the tool are all at 0 degree...

  • Page 761

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 745 - 19698 Angle when the reference tool axis direction is tilted (reference angle RA) 19699 Angle when the reference tool axis direction is tilted (reference angle RB) [Input type] Parameter input [Data type] Real path [Unit of data] Degree [Mi...

  • Page 762

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 746 - 19700 Rotary table position (X-axis of the basic three axes) 19701 Rotary table position (Y-axis of the basic three axes) 19702 Rotary table position (Z-axis of the basic three axes) [Input type] Parameter input [Data type] Real path [Un...

  • Page 763

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 747 - 19703 Intersection offset vector between the first and second rotation axes of the table (X-axis of the basic three axes) 19704 Intersection offset vector between the first and second rotation axes of the table (Y-axis of the basic three axes)...

  • Page 764

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 748 - 19709 Intersection offset vector between the tool axis and tool rotation axis (X-axis of the basic three axes) 19710 Intersection offset vector between the tool axis and tool rotation axis (Y-axis of the basic three axes) 19711 Intersection ...

  • Page 765

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 749 - 19712 Intersection offset vector between the second and first rotation axes of the tool (X-axis of the basic three axes) 19713 Intersection offset vector between the second and first rotation axes of the tool (Y-axis of the basic three axes) ...

  • Page 766

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 750 - 19738 Angle to check if Tool posture is near Singular posture or not [Input type] Parameter input [Data type] Real path [Unit of data] degree [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 ...

  • Page 767

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 751 - 19739 Angle to decide that the tool posture at block end is not changed [Input type] Parameter input [Data type] Real path [Unit of data] degree [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range...

  • Page 768

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 752 - 19741 Upper limit of the movement range of the first rotation axis [Input type] Parameter input [Data type] Real path [Unit of data] Degree [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 di...

  • Page 769

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 753 - 19744 Lower limit of the movement range of the second rotation axis [Input type] Parameter input [Data type] Real path [Unit of data] Degree [Minimum unit of data] Depend on the increment system of the reference axis [Valid data range] 9 d...

  • Page 770

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 754 - # 6 CRS In tool center point control, when the deviation from the path during movement at the specified cutting feedrate or rapid traverse rate is determined to exceed the limit: 0: The feedrate or rapid traverse rate is not decreased. 1: The...

  • Page 771

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 755 - 19752 Limit of the deviation from the path (for cutting feed) [Input type] Parameter input [Data type] Real path [Unit of data] mm, inch (machine unit) [Minimum unit of data] Depend on the increment system of the reference axis [Valid data...

  • Page 772

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 756 - 4.122 PARAMETERS OF GRAPHIC DISPLAY (4 OF 4) #7 #6 #5 #4 #3 #2 #1 #0 27350 GTP [Input type] Parameter input [Data type] Bit # 0 GTP When a general-purpose tool is drawn in animated simulation, the tip is: 0: Positioned on the f...

  • Page 773

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 757 - 27352 Holder length applied when a general-purpose tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This para...

  • Page 774

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 758 - 27354 Holder length 2 applied when a general-purpose tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This pa...

  • Page 775

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 759 - #7 #6 #5 #4 #3 #2 #1 #0 27356 TTP [Input type] Parameter input [Data type] Bit # 0 TTP When a threading tool is drawn in animated simulation, the tip is: 0: Positioned on the front. 1: Positioned on the rear. FrontRearTip Hold...

  • Page 776

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 760 - 27358 Holder length applied when a threading tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter s...

  • Page 777

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 761 - #7 #6 #5 #4 #3 #2 #1 #0 27360 GVP [Input type] Parameter input [Data type] Bit # 0 GVP When a groove cutting tool is drawn in animated simulation, the tip is: 0: Positioned on the front. 1: Positioned on the rear. Front RearTi...

  • Page 778

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 762 - 27362 Holder width applied when a groove cutting tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parame...

  • Page 779

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 763 - 27364 Holder length applied when a round-nose tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter...

  • Page 780

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 764 - #7 #6 #5 #4 #3 #2 #1 #0 27366 STP [Input type] Parameter input [Data type] Bit # 0 STP When a point nose straight tool is drawn in animated simulation, the tip is: 0: Positioned on the front. 1: Positioned on the rear. Front R...

  • Page 781

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 765 - 27368 Holder length applied when a point nose straight tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This ...

  • Page 782

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 766 - 27370 Holder length 2 applied when a point nose straight tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger Thi...

  • Page 783

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 767 - 27372 Length of cut applied when a drill tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter sets...

  • Page 784

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 768 - 27374 Length of cut applied when a tapping tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter set...

  • Page 785

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 769 - 27376 Length of cut applied when a chamfering tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter...

  • Page 786

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 770 - 27378 Shank length applied when a chamfering tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter ...

  • Page 787

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 771 - 27380 Length of cut applied when a ball end mill is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter se...

  • Page 788

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 772 - 27382 Length of cut applied when a boring tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This parameter sets...

  • Page 789

    B-63950EN/03 4.DESCRIPTION OF PARAMETERS - 773 - #7 #6 #5 #4 #3 #2 #1 #0 27384 VRP [Input type] Parameter input [Data type] Bit # 0 VRP When a multifunction tool is drawn in animated simulation, the tip is: 0: Positioned on the front. 1: Positioned on the rear. FrontRearTip ...

  • Page 790

    4.DESCRIPTION OF PARAMETERS B-63950EN/03 - 774 - 27386 Holder width applied when a multifunction tool is drawn in animated simulation [Input type] Parameter input [Data type] 2-word [Unit of data] 0.001mm (metric input), 0.0001inch (inch input) [Valid data range] 0 or larger This paramet...

  • Page 791

    APPENDIX

  • Page 792

  • Page 793

    B-63950EN/03 APPENDIX A.CHARACTER CODE LIST - 777 - A CHARACTER CODE LIST Character Code Comment CharacterCodeComment A 065 6 054 B 066 7 055 C 067 8 056 D 068 9 057 E 069 032 Space F 070 ! 033 Exclamation mark G 071 ” 034 Quotation marks H 072 # 035 Sharp I 073 $ 036 Dollar mar...

  • Page 794

  • Page 795

    B-63950EN/03 INDEX i-1 INDEX<Number> 5-AXIS MACHINING FUNCTION ............................. 731 <A> ACCELERATION/DECELERATION CONTROL .......96 AI CONTOUR CONTROL (1 OF 2) ............................530 AI CONTOUR CONTROL (2 OF 2) ............................713 ANGULAR AXIS CONTR...

  • Page 796

    INDEX B-63950EN/03 i-2 <I> I/O FORMATS..................................................................7 INCH/METRIC CONVERSION AND DIAMETER/RADIUS SWITCHING ...........................582 Inch/Metric Switching.......................................................8 INCLINATION COMPENSAT...

  • Page 797

    B-63950EN/03 INDEX i-3 SOFTWARE OPERATOR'S PANEL...........................446 SPINDLE CONTROL...................................................230 SPINDLE CONTROL WITH SERVO MOTOR ..........570 STANDARD PARAMETER SETTING TABLES.........24 Start and End of a Record ...............................

  • Page 798

  • Page 799

    Revision Record FANUC Series 30i/300i/300is-MODEL A, Series 31i/310i/310is-MODEL A, Series 32i/320i/320is-MODEL A PARAMETER MANUAL (B-63950EN) 03 Aug., 2007Total revision 02 May, 2004Addition of functions Addition of following models - Series 31i /310i /3...

  • Page 800

x