Navigation

  • Page 1

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1TL-Series Sub-SpindleOperator’s Addendum1234567 8910111220HPVECTORDUAL DRIVELIVE TOOLINGSUB SPINDLE

  • Page 2

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 21. INTRODUCTIONSpecific M codes are used in the programming of the sub-spindle operations. The sub-spindle is programmed fo...

  • Page 3

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 3Additionally, once the parts catcher is moved, the spindles could interfere with one another. Set-up and operation needs to ...

  • Page 4

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 43. OPERATIONWork EnvelopesSub-spindle travels are governed by tool types and sizes. The tool envelope chart, in the Technic...

  • Page 5

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 5SUB-SPINDLE CHUCK CLAMPING CHARTS 10203040506051015200Clamp force loss (kn)7000min-16000min-15000min-13000min-11000min-...

  • Page 6

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 64. PROGRAMMINGProgram StructureSub-spindle program structure is the same as the main spindle. However, main spindle M-codes...

  • Page 7

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 7G CODESG14 Sub-spindle Mode Group 17This G code selects the sub-spindle, the blocks which follow the G14 command will mirr...

  • Page 8

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 85. PROGRAMMING EXAMPLEPart Pass From Main Spindle to Sub-SpindleN200 (PASS OFF) (PARAMETER 248 =550) (MAKE SURE THAT PAR 57...

  • Page 9

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 9AXIALMILL/DRILLHAASHLT-AHTHER-32RADIALMILL/DRILLHAASHLT-RVTHER-32TL-15 TOOLING SYSTEM

  • Page 10

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 10TL-15 TURRET DIMENSIONSTL-25 TURRET DIMENSIONSPARTINGSPINDLE CENTERMAX PARTø13.720ø22.525RADIAL LIVETOOLTWIN BOREø19.525...

  • Page 11

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 11TL-15 SUB-SPINDLE REFERENCE DIAGRAMAll Dimensions are in inchesTL-25 SUB-SPINDLE REFERENCE DIAGRAM6.26ø10.00PC102.5733.5SU...

  • Page 12

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 12TL-SERIES OPERATOR’S TOOL SET-UP1. (VDI) ________________________2. (Turn) ________________________ (BOT) A _____________...

  • Page 13

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 13TL-15 SUB-SPINDLE TOOL TRAVEL RANGENOTE: The following diagrams are for machines with the live tooling options.All Dimensio...

  • Page 14

    © 2008 Haas Automation, Inc. 96-0037 rev L 9/08 14TL-25 SUB-SPINDLE TOOL TRAVEL RANGENOTE: The following diagrams are for machines with the live tooling options.10.0034.005....

x