Navigation

  • Page 1

    CNC SYSTEMSOSP7000L Model UOSP700LModel UCUSTOM SPECIFICATIONS(1st Edition)Publication No. :P-K118-012-E June 199651)LOKUMA

  • Page 2

    BEP0-001-R1 (I)TABLE OF CONTENTSPAGEI. PLC FUNCTIONSSECTION 1 PLC DATASECTION 2LADDER MONITORSECTION 3DATA TRACESECTION 4 EXTENDED INSTALLATION FUNCTION181929II. CUSTOM SPECIFICATIONSSECTION1 CUSTOM SCREENS FOR OSP700LMODEL U341.PARAMETER SCREENS341-1.Machine SystemParameter1-2.Machine User Param...

  • Page 3

    IPLC FUNCTIONS

  • Page 4

    BEP0-001-R1 1SECTION 1 PLCDATASECTION 1 PLC DATA1.Data Display Screen Corresponding to the IdentifiersThescreens tobe displayed in response tothe designation ofan identifierare explainedbelow.- Bit identifier (irregular hexadecimal)Identifiers: I., O.U„ G.,J.K„ M.PLC DATA DISPLAYID= I.NO.=0PA...

  • Page 5

    BEPO-001-R1 2SECTION 1 PLC DATA- Bit identifier (decimal)Corresponding identifiers: DBPLC DATA DISPLAYID=DBPAGE10.001mmNO.LABEL* oooommiittimNO.LABEL0010000100110002mmrnrn0012000300130004ammiiaiiiiit0014iwimmmii0015001600170018mtmffit##001900050006000700080009CMNT:>III SEARCHIIourrFunctionsdis...

  • Page 6

    BEP0-001-R1 3SECTION 1 PLC DATA- Stepcontrol relay(bit) identifierCorresponding identifiers: S.PLC DATA DISPLAYGNO.=0SNO.LABEL00-04* mmitiitta05-0910-14mmmm15-1920-2425-2930-3435-3940-4445-49ID=SPAGE 10.001mmLABELLABELLABELLABEL>IIIIIIII SEARCHIII QUITIFunctions displayed in the ordinary statu...

  • Page 7

    BEP0-001-R1 4SECTION 1 PLCDATA(2) Word Identifier- Corresponding identifiers:Wl, WOWU, WG, WJWK, WM, SIWSPLC DATA DISPLAYID=WIPAGE0.001mm1NO.LABEL* oooouiiummiDATA-ddddd=xxxxH-ddddd=»oo<H-ddddd=xxxxH-ddddd=xxxxH-ddddd=xxxxH-ddddd=xxxxH-ddddd=xxxxH-ddddd=»oo(H-ddddd=xxxxH-ddddd=mxHLABELNO.DAT...

  • Page 8

    BEP0-001-R1 5SECTION 1 PLCDATA(3)Long Identifier- Corresponding identifiers:LI, LOLU, LG, LJLK, LM, DlMCPLCDATA DISPLAYPAGE10.001mmID=LINO.LABEL* ddddDATA-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxx...

  • Page 9

    BEP0-001-R1 6SECTION 1PLCDATA(4)Timer IdentifierPLCDATA DISPLAY!D=TIMERPAGE0.001mm1NO.ID. LABELID.LABELDATA-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxxdddd*T.TRxxxxHxxxxHxxxxHxxxxHx...

  • Page 10

    BEP0-0O1-R1 7SECTION 1 PLCDATA(5) Counter IdentifierPLCDATA DISPLAYID=COUNTERPAGE0.001mm1NO.ID. LABELdddd*C.ID. LABELDATA-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxx-dddddddddd=xxxxCRxxxxHxxxxHxxxx...

  • Page 11

    BEP0-001-R1 8SECTION 2LADDER MONITORSECTION 2LADDER MONITOR2.Monitoring the LadderThe sequence programcan be displayed in theladder form.(1)Ladder Monitor ScreenAUTO OPERATIONxxxxxxxxxxxxxxxx OxxxxNxxxx 999999LADDERMODULENAME=SPINDLENO=PG0084PAGEFrHB I-ti-U. 000E1/24/G. 0006M. 08001.0015U.000E{ÿ...

  • Page 12

    BEP0-001-R1 9SECTION 2LADDER MONITOR•Page displayPAGEDisplays the module’srelative page numberand the total number pages999/999TotalRelativeFunction 1MODULEI PAGEICALLI SELECTI LABELI SEARCHIIII ROLLI ROLLDOWNI QUITIl[EXTEND]UPftftIDENTIFIER•MODULE CALLSelectsthe program in response tothe i...

  • Page 13

    BEP0-001-R1 10SECTION 2LADDER MONITOR1)Press [F1] (MODULE CALL).2) Inputthe program name (max. 8 characters).3)Press the WRITE key.Note:It is notallowed to use awild cardwhen designating a programname. Ifthesame programname is used forboth the program module and thefunction module, the program in...

  • Page 14

    BEP0-001-R1 11SECTION 2LADDER MONITOR6)Press the WRITE key.AUTO OPERATIONJOOOOOOOOOOOOOOCXXOxxxxNxxxx 999999PROGRAMINDEXPG-NO. MODULE NAMExxxxxxxxxxxxxxxx999XXXXXXXXXXXXXXXXxxxxxxxx999XXXXXXXXXXXXXXXX999XXXXXXXXXXXXXXXXxxxxxxxx1mmPAGE1999999999999999999999=MODULEI PAGEICALLI SELECTI LABELI SEARCH...

  • Page 15

    1\BEP0-001-R1 12SECTION 2LADDER MONITORh: Returns tothe previous page.0: Advances tonext page.At thefirstor last page,the pageis accessedin the followingmanner inresponse tothe pressing ofthe page key.[pt]: If this page keyispressedwhile the first page is displayed, thelastpage is displayed.: If ...

  • Page 16

    BEP0-001-R1 13SECTION 2LADDER MONITORAUTO OPERATIONxxxxxxxxxxxxxxxx OxxxxNxxxx 999999LADDER. MODULENAME=SRINDLENO.=PGOOB4PAGEI /\—j—\ UI-—-[ ]-RSTCM1/24RNRDYPB-RSTVASOFPLRITCM4 I-intRsTFN1RNRDY()VASOFPLSITB[S-CODELMOV]ERIDSMECOMMENT: SPINDLEREADYMODULEI PAGEI IDENTIIICALLI SELECTIFIERI SEAR...

  • Page 17

    BEP0-001-R1 14SECTION 2LADDER MONITORNote2: In thelabel,it is notallowed touse a wild card.Note 3: Option designationThe followingoption designation ispossible. It is allowed to designatemorethanone option atthesame time.Option designation requires to be separated fromthe data using thedelimiterN...

  • Page 18

    BEP0-001-R1 15SECTION 2LADDER MONITOR>Searchforthe symbol’scursor position ? (Y/N)[Y] +[WRITE]: The identifieror label located by thecursoris established.[N] +[WRITE]: The step returns totheone wherean identifieror label is input.If thereis no symbolwhere thecursor is located,the followingme...

  • Page 19

    BEP0-001-R1 16SECTION 2LADDER MONITOR4)Searchstartswhen [F6] (START)is pressed.The firstcircuit block foundis displayed atthe middle ofthescreen and isidentified by thecursor.If the designated searchobjective is foundin more thanone circuit block, thefollowing message isdisplayed alongwith the di...

  • Page 20

    BEP0-001-R1 17SECTION 2LADDER MONITOR•QUITReturns tothe PLC test functionmenus.•EXTENDChanges to function2.Function 2I COMMENTII ON/OFFII[EXTEND]II•COMMENT ON/OFFSelectswhetheror not a comment is displayedbeneath the symbol. Commentisdisplayedin up to16characters. (Figs. 2-7 and 2-8)AUTO OP...

  • Page 21

    BEP0-O01-R1 18SECTION 2LADDERMONITORAUTO OPERATION>ooooooooooooooo<OxxxxNxxxx 999999.MODULENAME=SRINDLENO=PG0084PAGE| /F1—] a |-—-[ ]—U. OOOESPINDLERESET CO1/24LADDERG. 0006SPINDLEREADYM. 0800SPINDLESERVO REI—1.0015RESETU. OOOESPINDLERESET CO()-M. 0800SPINDLESERVOREG.0004SPINDLERESE...

  • Page 22

    )BEP0-001-R1 19SECTION 3DATA TRACESECTION 3DATA TRACE3.Tracing the DataThe data tracefunction collects the data, specified bythe identifier,tothe bufferarea inpredeterminedintervals to display iton the screen.When the data trace functionis started, the firstscreen displayed is the traceconditions...

  • Page 23

    BEP0-001-R1 20SECTION 3DATA TRACEChangesthescreen tothe tracescreen.•QUITReturns tothePLC test functionmenus.<Setting items>Move the cursor to the datasetting item using thecursor control keys([T] [T] Q P»|).- SAMPLING CYCLE (a)Setthe sampling cycle._SAMPLING CYCLE06.4msec1:25.6msec2:102...

  • Page 24

    BEPO-001-R1 21SECTION 3DATA TRACEThelist ofdatawhichcan be setis displayed. (Fig. 3-11)After pressing [F1] (SET),input themenu number and press theWRITE key.Selection is possible from the following options.The valueinisset.POWER ON0:POWER ON NO DATA TRACE [POWER ON NO DATA TRACE]1: POWER ON DATA ...

  • Page 25

    BEP0-OO1-R1 22SECTION 3DATA TRACEThe valueinis set.TRIGGERINVALID(No trigger signal setting designated)[INVALID]0:TRIGGERBIT ONOFFSTART1:TRIGGERBIT OFF-» ONSTART2:TRIGGERCHANGE START3:TRIGGER= STANDARD VALUE START[-ÿON] (default)[-ÿOFF]H-CHG][=EQU](Thestandard value can be set bythe customer. ...

  • Page 26

    BEP0-001-R1 23SECTION 3DATA TRACE- TRACERELAY NAME (h)Set the objective data fortracing.Default is “notset” (blank).IDENTIFIERWlBIT INPUTBITINPUTBIT INPUTWMAUXILARY RELAYAUXILARY RELAYLMAUXILARY RELAYWKKEEP RELAYKEEP RELAYLK.KEEPRELAYT.TIMER RELAYI.LIMK.Fig. 3-14 Trace Relay Name SettingDataM...

  • Page 27

    BEP0-001-R1 24SECTION 3DATA TRACExxxxxxxxxxxxxxxx Oxxxx Nxxxx 999999AUTO OPERATIONDATA TRACEDISPLAY 8 TRACEDATAPOWER ONTRACE### (b) ###TRIGGER COND(d)M#(e) ###AFTER TRIGGER### (g) M#SAMPLING CYCLE###(a)### msecTRIGGER SIGNAL### (c) ###BEFORE TRIGGER### (f)###ffl#(D#0)#(i)#CYCLE NO.-- 00-(I)#- M--...

  • Page 28

    BEP0-001-R1 25SECTION 3DATA TRACEIf hexadecimal isselected, the data is followedby “H”.In thecase ofbitidentifier, display is givenin either “0”or “1”independent ofthespecified display format.- CYCLE NO. O')Displays timeelapsed afterthe triggercondition was satisfied; the timing atwhi...

  • Page 29

    1-BEP0-001-R1 26SECTION3DATA TRACENote 1: Offset amountis setin terms of time. Its unit is the sampling cycle andonesampling cycle is expressedas “1”. Settingof a negative value is possible.Note 2: If thespecified offsetpoint isoutside the sampling range, the point datain thesampling range an...

  • Page 30

    BEPO-001-R1 27SECTION 3DATA TRACE<Display items>-SAMPLING CYCLE (a)- POWER ONTRACE (b)-TRIGGER SIGNAL (c)- TRIGGER COND (d)- STANDARDVALUE (e)The value seton the tracecondition settingscreen- BEFORE TRIGGER (f)-AFTER TRIGGER (g)- TRACERELAY NAME (h)- DATA DISPLAY FORMAT(i)- Contents oftrace...

  • Page 31

    BEP0-001-R1 28SECTION 3DATA TRACE•TRACE STARTStartsdata tracing. Duringdata tracing, the following message is displayed.TRACEDATA SAMPLING!!•TRACE QUITEnds datatracing. This functionis used toexit the traceexecution loop if theprocessing cannotexit the loopdue tounsatisfied trigger condition,...

  • Page 32

    BEPO-001-R1 29SECTION 4EXTENDED INSTALLATION FUNCTIONSECTION 4EXTENDED INSTALLATION1.OVERVIEW1-1.OverviewThe extendedinstallation function is used toinstall the datafileor output tothe floppydisk, after adjusted and debugged with the adjustment/testfunction.1-2.Processing bytheExtended Installati...

  • Page 33

    BEP0-001-R1 30SECTION 4EXTENDED INSTALLATION FUNCTION(2)Installation ProcessingThe fileis installed tothe OSPin the followingprocedure.a)The floppydisk formatischecked.If the formatis other than MS-DOS,anerror occurs.b)The function searches thesubdirectory, which has thesame nameas the OSPdevicen...

  • Page 34

    BEP0-001-R1 31SECTION 4 EXTENDED INSTALLATION FUNCTION2.OPERATION PROCEDURE(1) Start the OSPin theinstallation mode.[MAIN MENU]1:INSTALL2:DIAGNOSIS, INITIAL3:EXTENDPlease select anumber. (1/2/3/Q)I(2) SelectU3:EXTEND".After keying in “3", press theWRITE key.Theextendedmenus are displa...

  • Page 35

    BEP0-001-R1 32SECTION 4 EXTENDED INSTALLATION FUNCTION[EXTENDED INSTALL]123Q:EXIT EXTENDED INSTALLPlease insert a control-floppy.Please press WRITE key after insertinga floppy.(4) After setting the floppydisk used forinstallation tothe drive,press the WRITE key.Afterthe completion ofinstallation,...

  • Page 36

    IICUSTOM SPECIFICATIONS

  • Page 37

    I-rJ

  • Page 38

    BEP0-001-R1 34SECTION1 STANDARD CUSTOM SCREENSSECTION 1STANDARD CUSTOMSCREENS1. PARAMETER SCREENSFor themajority oflathe machine parameters,locations remain unchanged fromthe5020L control tothe 700Lcontrol. Custom parameterscan befoundon the OSP700Lcontrol by selecting <Parameter Mode>and s...

  • Page 39

    BEP0-001-R1 35SECTION 1 STANDARDCUSTOM SCREENSAXISMAX FEEDRATE AT DOORINTERLOCK4UNIT:MIN. VALUE:0MAX. VALUE: 2000000INITIAL SET:2000000pmThis parameter setsthe maximum allowable axis feedrate without causinga DoorInterlock alarm when thefrontdoor is open andthe Door interlock switch is OFF. SeeAl...

  • Page 40

    BEP0-001-R1 36SECTION 1 STANDARD CUSTOM SCREENSM03 ANSWERDELAY8UNIT:10msecMIN. VALUE:11MAX. VALUE: 100INITIAL SET:11This parameter setstheanswer delay for M03.M04 ANSWER DELAY9UNIT:10msecMIN. VALUE:11MAX.VALUE: 100INITIAL SET:11This parameter setsthe answer delayforM04.10S CODEANSWER DELAYUNIT:10...

  • Page 41

    BEPO-001-R1 37SECTION 1 STANDARD CUSTOM SCREENS1.1*MACHINE USER PARAMETER *(PARAMETER BIT)TURRET SHORTEST PATH CONTROL VALID1INITIAL SET:0This parametersetsthe Turretshortest path controlvalid.0: Turretwill rotatein commanded direction toreach thedesired tool location.1:Turret will rotatein the d...

  • Page 42

    IBEP0-001-R1 38SECTION 1 STANDARD CUSTOM SCREENS1.2* MACHINE USERPARAMETER * (TIMER)1TAILSTOCK QUILL IN POSITIONUNIT:10msecMIN.VALUE:0MAX.VALUE: 20000INITIAL SET:800The tailstock quilladvance command is completedwhenthis timer reachesthe specified value.2GUIDEWAY LUBRICATION OILMOTOR ONTIMEUNIT:1...

  • Page 43

    BEP0-001-R1 39SECTION 1 STANDARD CUSTOMSCREENS5LUBRICATION OILMOTOR ONMONITOR/UNIT:10msecMIN. VALUE:0MAX. VALUE: 60000INITIAL SET:3000t-This timer is used to verifythat lubrication oil is flowing afterlubemotor ONiscommanded and flowshould have begun.LUBRICATION OIL MOTOR OFF MONITOR6UNIT:10msecM...

  • Page 44

    BEP0-001-R1 40SECTION 1 STANDARD CUSTOM SCREENS2. PLC CHECK SCREENSCustomscreens used todisplay the contentsof PLC datamemory arelocated on PLC Check Screens.Toaccess thesescreens press <Extend> function key on the NC operationpaneluntil the PLC CheckFunctionappears. Press <PLC Check>...

  • Page 45

    IIBEP0-001-R1 42SECTION1 STANDARD CUSTOM SCREENSFUB (EC) NO.13INPUTID.Strobebit7bitebitsbit4bit3bit2bit1bitOCOMBOL,LubeTank LevelBOF,LubeTank Flow1.0248~I.024FEOF,Emer.Limit CancelLOA/,BL-MotorOverload/TMA/CPUTemp.Alarm/OHA/, Trans.Overload/1OLA/,ECOverload/ECON/,EmergencyStopXB-13-2-9XB-13-2-8XB...

  • Page 46

    IBEP0-001-R1 43SECTION 1 STANDARD CUSTOM SCREENSFUB (EC) NO.13 OUTPUTID.Strobebit7bitebit5bit4bit3bit2bit1COMbitOALMO,AlarmLampWEND,Work EndLampNCRUN, NCRunLamp0.0248~O.024FACL1,CoolantMotor ONHYMON, HydPumpMotor1BOMT,LubeMotor ONSVON, SVPHVON, VACOV A2.B2ONONONInd. Lamps-24V C2,D2XB-13-3-A1XB-13...

  • Page 47

    IBEP0-001-R144SECTION 1STANDARD CUSTOM SCREENSFUB (EC) NO.14 INPUTID.Strobebit7bit6bitsbit4bit3bit2bit1bitOCOMUTI18,UserTask In 18UTI17,UserTaskIn 17UTI16, UserTask In 161.0268~I.026FUTI15,UserTask In 151UTI14,UserTask In 14UTI13,UserTask In 13UTI12,UserTask In 12UTI11, UserTaskIn 11I/OVariablesX...

  • Page 48

    BEP0-001-R145SECTION1 STANDARD CUSTOM SCREENSFUB (EC) NO.14 OUTPUTID.Strobebit7bitebit5bit4bit3bit2bit1bitOCOMUT018,UserTask OutUT017,UserTask Out17UT016, UserTask Out 160.0268~O.026FUT015,UserTask Out 15UT014,UserTask Out141UT013,UserTask Out13UT012,UserTask Out12UT011, UserTask Out11OVA2,B218I/...

  • Page 49

    BEP0-001-R1 46SECTION1 STANDARD CUSTOM SCREENSFUB (EC) NO. 15INPUTStrobeID.bit7bit6bit5bit4bit3bit2bit1bitOCOMRDCL, RoofDoor CloseRDOP,RoofDoor OpenIN028D,SpareIN028C,SpareRLRET,Robot/LoaderRetracted1.0288~I.026FRLAB,Robot/LoaderAbnormalNMFW,NoMaterial,FullWork1XSPOR,ExternalSpindle OrientCommand...

  • Page 50

    BEP0-001-R147SECTION 1STANDARD CUSTOM SCREENSFUB (EC) NO.15 OUTPUTbit4bit3bit2bit1COMStrobebit7bit6bit5bitOID.LDREN,Robot/LoaderEnableOVA2,B2SPZR,SpindleStoppedConfirmationOT028A,SpareRDCL, RoofDoor CloseCommandCYSP, CycleStopRequestNCAL, NCAlarm A,B,CSPOR,SpindleOrientedConfirmationRDOP,RoofDoor...

  • Page 51

    BEP0-001-R1 48SECTION 1 STANDARD CUSTOM SCREENSMPIO (PANEL) NO. 1INPUTID.Strobebit7bitebitsbit4bit3bit2bit1bitOCOMNCST, NC1.0008~I.000FNTS,Feed(Slide)HoldNCRT, NCResetRET,SequenceReturnPNOP1,PanelOperation1PNOP2,PanelOperation 21BFLINK,BarfeederAutoModeDRIL, l/LReleaseStartXB-MP-6-32XB-MP-6-31XB-...

  • Page 52

    BEP0-001-R1 49SECTION 1 STANDARD CUSTOM SCREENSMPIO(PANEL) NO.1 OUTPUTStrobeID.bit7bitebit5bit4bit3bit2bit1bitoCOMUnusable0.0008~O.OOOFUnusableUnusableUnusableUnusable1UnusableUnusableBUZZER,Buzzer OnXB-MP-4-4ATRE, ATurretSelectionNot UsedNCSP, RUNLamp0.0000~0.0007STM, STMLampNTS,FeedHold LampPRS...

  • Page 53

    IIBEP0-001-R1 50SECTION 1STANDARD CUSTOMSCREENSMPIO (PANEL) NO. 2INPUTID.Strobebit7bitebitsbit4bit3bit2bit1bitOCOMCLTP,CoolantSwitch ByM-Code1.0028~I.002FCLON,CoolantManualSwitchAXGN,Spindle GearNeutralAXGS,Spindle GearEngageOMON,LoadMonitor On1OMAT, LoadMonitor AutoSettingModeTLRT, TurretRotatio...

  • Page 54

    BEP0-001-R1 51SECTION 1 STANDARD CUSTOM SCREENSMPIO (PANEL) NO. 2 OUTPUTID.Strobebit7bit6bitsbit4bit3bit2bit1bitOCOMCLTP, CoolantSwitch By M-CodeCLON,CoolantManualSwitch0.0028~0.002FAXGN,Spindle GearNeutralAXGS,Spindle GearEngage1OMON,LoadMonitor OnOMAT,LoadMonitor AutoSettingModeF100, FeedOverid...

  • Page 55

    IBEP0-001-R1 52SECTION 1 STANDARD CUSTOM SCREENSMPIO (PANEL) NO. 3INPUTID.Strobebit7bitebitsbit4bit3bit2bit1bitOCOMUnusableUnusableF05F041.0048~I.004FF031F02F01F00FeedrateOverride SwitchUnusableUnusable1.0040~1.0047UnusableUnusableUnusableUnusable2UnusableUnusableUnusableUnusable1.0058~I.005FS05S...

  • Page 56

    BEP0-001-R1 53SECTION 1 STANDARD CUSTOM SCREENSMPIO (PANEL) NO. 3OUTPUTID.Strobebit7bitebitsbit4bit3bit2bit1bitOCOMUnusableUnusableUnusableUnusableUnusable0.0048 ~0.004FUnusableUnusableUnusable1UnusableUnusableUnusableUnusable0.0040~0.0047UnusableUnusableUnusable2UnusableUnusableUnusableUnusableU...

  • Page 57

    JBEP0-001-R1 54SECTION 1 STANDARD CUSTOM SCREENSMPIO (PANEL) NO. 4 INPUTID.Strobebit7bit6bit5bit4bit3bit2bit1bitOCOMIN006F,Spare1.0068 ~I.006FIN006E,SpareIN006D,SpareIN006C,SpareIN006B,Spare1GDP,Gauging DataPrintoutSS200, Sub-SpindleOverride 200SS150, Sub-SpindleOverride150ovSub-SpindleXB-4-3-30X...

  • Page 58

    BEP0-001-R1 55SECTION1 STANDARD CUSTOMSCREENSMPIO (PANEL) NO. 4 OUTPUTID.Strobebit6bitsbit7bit4bit3bit2bit1bitoCOMOPA,OilPressureAlarmCHAR, SMWAir PressureAlarmSPPA,SpindleLubePressureAlarmOT006CSpareOT006B,SpareOT006A,SpareOT0069,SpareOT0068,Spare0.0068~0.006F15VLubeMonitorXB-4-3-8XB-4-3-7XB-4-3...

  • Page 59

    IBEP0-001-R1 56SECTION 1 STANDARD CUSTOMSCREENSMPIO (PANEL) NO.5 INPUTID.Strobebit7bitebitsbit4bit3bit2bit1bitOCOM1.0088~I.008FIN008F,SpareIN008E,SpareRDCL, RoofDoorCloseRDOP,RoofDoor Open1SBRE,Return toPositionSBUC,TailstockUnclampSBCL,TailstockClampNCPT,Upload DNC-C3Auto Tow-AlongDNC-C3XB-5-3-3...

  • Page 60

    BEP0-001-R1 57SECTION 1 STANDARD CUSTOM SCREENSMPIO (PANEL) NO. 5 OUTPUTID.Strobebit7bitebit5bit4bit3bit2bit1bitOCOMHLUC,TailstockUnclampHLCL,TailstockClampIDMD, FMSIndividual0.0088~0.008FDCOM, DataCommunicate1INTM, FMSInterruptFMSA, FMSTSCT, TestFXRQ,FixtureChangeRequestAutoCutAutoTow AlongDNC-C...

  • Page 61

    (BEP0-001-R1 59SECTION 2 ADDITIONAL SPECIFICATIONSSECTION 2ADDITIONAL SPECIFICATIONSThis section provides additional informationfor standard specifications not contained in another manual.1. COMPREHENSIVE M-CODE TABLEM CodeContentsApplicable SpecificationsMOOProgram stopM01Optional stopM02Program...

  • Page 62

    BEP0-001-R1 60SECTION 2 ADDITIONAL SPECIFICATIONSM CodeContentsApplicable SpecificationsM45M46M47M48Override ignorecancelOptional specificationM49Spindleoverride ignoreM50Additional air blower 1 OFFStandard specification(Spareair blow)M51Additional air blower 1 ONM52M53M54Automatic indexing ofind...

  • Page 63

    BEP0-001-R1 61SECTION2 ADDITIONAL SPECIFICATIONSM CodeContentsApplicable SpecificationsM93Bar feeder advanceM94Loader loadingLoader specificationM95Loader unloadingM96Unloader loadingUnloader specificationM97Unloader unloadingM98Tailstock spindlethrust lowTailstock high/lowpressure spec.M99Tailst...

  • Page 64

    BEP0-001-R1 62SECTION 2ADDITIONAL SPECIFICATIONSApplicable SpecificationsM CodeContentsM141Caxis clamp OFFSynchronoustapping specificationM142Coolant pressure lowM143Coolant pressure highOptionalspecificationM144Additional coolant 1 OFFM145Additional coolant 2ONM146Caxis unclampMultiple machining...

  • Page 65

    IBEP0-001-R1 63SECTION 2 ADDITIONAL SPECIFICATIONSM CodeContentsApplicable SpecificationsM191M192M193Cancel ofM194M194Phasingforthread cuttingM195Cancel OFM196Thread phase matching specificationM196Thread cuttingphasestroke effective1M197Thread cuttingphase strokeclearM198M199M200CT axis unclampY...

  • Page 66

    BEP0-001-R1 64SECTION 2ADDITIONAL SPECIFICATIONSM CodeApplicable SpecificationsContentsM240M tool spindle: neutralM241M tool spindle: 1st rangeM242M tool spindle:2nd rangeMultiple machining specificationM243M tool spindle: 3rd rangeM244M tool spindle:4th rangeM245M246M tool spindleinterlock ONMul...

  • Page 67

    BEPO-001-R1 65SECTION 2 ADDITIONAL SPECIFICATIONS2. LED LAMP CHECKThe panel LEDscan becheckedto verify operationsby initiating LED CheckMode. To startLED Check Mode,press the SLIDE HOLDbutton while pressing the NCRESET button. The panelLEDs should begin flashing.To stopthe LED check,press SLIDE H...

  • Page 68

    BEPO—001-R1 66SECTION 3OPTIONAL SPECIFICATIONSSECTION 3OPTIONAL SPECIFICATIONSThissection provides parameterscreen information for optional specifications as well as any additionalinformation related tooptionalspecifications notcontained inanothermanual.1. *AIR CHUCKPARAMETER **Air ChuckUser Pa...

  • Page 69

    -BEP0-001-R1 67SECTION 3OPTIONAL SPECIFICATIONS2.* AUTO DOOR OPEN/CLOSE PARAMETER **Auto DoorO/C User Parameter *(Setunits 10msec)Door Open Confirmation Timer (TS0046)(ex: 0, 400, 500, 600,700, 800, 900, 1000)500Door CloseConfirmation Timer (TS0047)(ex: 0, 400,500, 600,700, 800, 900, 1000)500Purp...

  • Page 70

    BEP0-O01-R1 68SECTION 3OPTIONAL SPECIFICATIONS3.BARFEEDER SPECIFICATIONSThe following givesa brief description ofthe interface signals between the lathe and thebarfeeder:BARFEEDER => LATHE1. Emergency Stop-dry contact frombarfeeder thatshould beplacedin the EmergencyStopcircuit ofthe lathe2. B...

  • Page 71

    BEPO—001-R1 69SECTION 3OPTIONAL SPECIFICATIONSLATHE => BARFEEDER1. Emergency Stop-drycontact tobe put in series with the barfeeder's Emergency Stopcircuit2. ChuckCloseddry contact provided toindicate whether chuck is openedor closedchuck closedchuck openedsignal highsignallow3.Pusher Advance...

  • Page 72

    BEP0-001-R1 70SECTION 3OPTIONAL SPECIFICATIONS4. * CHUCK AIR BLOW WITH SPINDLE JOG ** ChuckAir BlowUser Parameter *Spindle Jog Setting(K0025)0Purpose:The Spindle joguser parameterwill allow the machineoperator to jogthe spindleanduse the Chuckair blow option simultaneously.Example: To enable theS...

  • Page 73

    BEPO—001-R1 71SECTION 3OPTIONALSPECIFICATIONS5. * USER M-CODEPARAMETER** User M-Codes Parameter Screen*1: Hold Output0:Pulse OutputM101/M102M103/M104M105/M106M107/M108M230/M231M232/M233M234/M235M236/M23700000000Purpose: The purpose ofthe User M-code parametersis to allowthe customertohold the o...

  • Page 74

    BEPO—001-R1 72SECTION 3OPTIONAL SPECIFICATIONS6.POP UPTURRET INDEX SPECIFICATIONDescriptionThis function is used onthe Cadetand CadetL1420 toreduce the turretindex time. Through theuse ofM-Codesin the program,theuser can reduce the index time by unclampingthe turretbeforeitreaches its indexposi...

  • Page 75

    BEPO—001-R1 73SECTION 3OPTIONAL SPECIFICATIONSN032GOOX1.1Z4.01T0404ThreadingReferencePoint-4"1.5"r0,01"3"4"Explanation of Example ProgramLine N001- N009 Usingthe standard programming to rough outthe partas shown.Line N010- Because the lap cycleleaves thetool atthe refer...

  • Page 76

    BEPO—001-R1 74SECTION 3 OPTIONAL SPECIFICATIONS• After turrettool position is confirmed bythe control, the turret automatically beginsclamping motion.• Turret clampcondition is checked before cuttingfeed (G01, G02, and G03),it is notchecked beforerapidfeed (GOO).• When a cutting feedrate ...

  • Page 77

    BEPO—001-R175SECTION 3OPTIONAL SPECIFICATIONS7. AUTO TOUCHSETTER SPECIFICATIONS7.1 * AUTOTOUCHSETTER USERPARAMETER*SPINDLESTOPPED1INITIAL SET:00:Alarm Awill occur if thetouch setter is notretracted andthespindle is rotating,or, commandingtouch settermovement with spindlerotation is attempted.1:...

  • Page 78

    1BEP0--001-R1 76SECTION 3OPTIONAL SPECIFICATIONS4Z-AXIS AT POSITIVELIMITINITIAL SET:00:Alarm Awill occur if touch setter movement is commandedwhen the Z-axis is not atthepositivelimit.1: InAuto/MDI mode, M117/M118 (touch setter advance/retract) isallowed when theZ-axis is notatthepositivelimit.In...

  • Page 79

    BEP0-001-R1 77SECTION 3OPTIONAL SPECIFICATIONS8. AUTO TOWALONG TAILSTOCK SPECIFICATIONS8.1. OVERVIEWThe tailstockbody canbe moved and positionedusing the motion ofthe saddle (ZA-axis), notrequiringa tailstock bodydriveaxis. The tailstock body is connected tothe saddle with thejoint pin. SeeFig. 8...

  • Page 80

    BEP0-001-R1 78SECTION 3OPTIONALSPECIFICATIONS8.2.SETTING INITIAL POSITIONSetthe initial position fortailstock positioning when connectingthetailstock body with thesaddle forthe firsttime, afterinstalling the control software, or when the position encoder ofthe ZA-axis has been replaced.This setti...

  • Page 81

    BEP0-001-R1 79SECTION 3OPTIONAL SPECIFICATIONS8.3.MANUALPOSITIONING OFTAILSTOCK BODYTo positionthetailstock body manually,follow the steps below:(1)Move the X-axis to the travel end position inthe positive direction.(2)Retract thetailstock spindle fully.Keep the spindlestill.(3) Press the JOINT P...

  • Page 82

    BEP0-001-R1 80SECTION 3OPTIONAL SPECIFICATIONS8.4. TAILSTOCK POSITIONING BY PROGRAMMED COMMANDSCommands UsedIN Program:W: W-axis command (Incremental commands allowed)G152 : Gcode calling fortailstock positioningM188 : Joint OFFM189: Joint ONThese GandM codesare effective only in thecommanded blo...

  • Page 83

    BEP0-001-R1 81SECTION 3OPTIONAL SPECIFICATIONSNote 1: TheW-axis movementcommand mustbespecified with G152 in thesameblockasG152W100.Note 2:Conditions forW-axis commandexecution are:- TheX-axis is atthe travelendin the positivedirection. (Fortwo-saddlemodels,both the XA-axis and the XB-axis must b...

  • Page 84

    BEP0-001-R1 82SECTION 3OPTIONAL SPECIFICATIONS8.5.PARAMETER SETTING8.5.1. SoftLimit andTravel EndLimitOnthe W-axis, soft limit and travelend limitare setbothin the positive and negativedirectionsas on the X-and Z-axis, determining travel range of theW-axis. See Fig.8-4.Theycan besetin thesamemann...

  • Page 85

    BEP0-001-R1 83SECTION 3OPTIONAL SPECIFICATIONSa)Displaythe USER PARAMETER page ofthe PARAMETER SET mode pages.Fortwo-saddle models,press theA keyon the NC operation panel toselect A-turret.b)Move the cursor toW data of parameters +/-variable limit (PM).c) After pressing function key [F1](SET), ke...

  • Page 86

    BEP0-001-R1 84SECTION 3OPTIONAL SPECIFICATIONSAsshown in Fig.8-5, there isa backlash between the saddle andthe tailstock bodyfor joint.Therefore, it is necessary topreset thebacklash amount toinsert the joint pin atthe centerofthe joint hole correctly and also to eliminate positioningerror caused...

  • Page 87

    BEP0-001-R1 85SECTION 3OPTIONAL SPECIFICATIONSSystemvariablesindicated below are used for settingand reaching out ofzero offset, andplus and minus softlimit ofW-axis. (Thesevariables are available whenUser Task 2functionis selected.)(1) <VZOFW>Zero OFFset ofW-axisWhen settinga variable, des...

  • Page 88

    )BEPO—001-R1 86SECTION 3 OPTIONAL SPECIFICATIONSREVISION HISTORYManual Name: OSP7000L/OSP700LCUSTOM SPECIFICATIONSManual No.:P-K118-12-EiEditionDateRevision Desriptioni(01)June ‘961)->tI

  • Page 89

    rBEPO—001-R1 87SECTION 3 OPTIONAL SPECIFICATIONSThis manual may be atvariance with the actual product due tospecification design changes.Please also notethat specifications are subject to changewithout notice. If you requireclarification or further explanation ofanypoint in this manual, pleasec...

  • Page 90

x