Navigation

  • Page 1

    CNC Router user manualJinan Ruofen Laser Machinery Co.,LtdWebsite: actionURI(http://www.ruofencnc.com):www.ruofencnc.comService Contact information :Email: actionURI(mailto:service@ruofencnc.com):service@ruofencnc.comSkype:lifancncPlease send us your Order No. , we will do our best service for yo...

  • Page 2

    1Contents1. Foreword---------------------------------------------------------------------22. Part names and function------------------------------------------- -------33. Installing and Operating-------------------------------------------- ------54. Maintenance------------------------------------...

  • Page 3

    21. ForewordThank you for purchasing our CNC router!We professionally manufacture of CNC Router in China. The routers areused forwoodworking, advertising (manufacturing signs, marks anddecoration), furniture, mould and crafts.In the Introduction describe the Installation and maintenance, analyze ...

  • Page 4

    3Standard partsPlease check the number of the following parts. Please contact with us ifany item is omitted.ItemNameSpecificationQuantity Remarks1Wood Tool Box1box2Collet(1.5kw spindle no 12.7Φ )3.175 Φ 4Φ 6Φ12.7Φ4pcs3DSP Controller1pc4IDE cable of DSP Controller1pc5Hexagon ring spanner0pc6O...

  • Page 5

    43. Installing and OperatingOpen-endedspannerIDE cableColletToolBucketClampWater pumpSoftware CDPower cordDSP Controller

  • Page 6

    51) connect the powerFirst from the circuit breaker output three firing line ,one null line ,one ground line .and connect tomachine .as picture :Ground lineNull lineFiring line

  • Page 7

    62). DSP NK105 operating Basic Configuration of NK105 SystemNull lineFiring line

  • Page 8

    7Memory: 128MFlash: 256MMonitor: 128 × 64 graphic LCD module1. Install machine :machine most already contact good,.you only need install DSP to controlbox,so picture:2. After install complete ,open power switch . Green ---switch buttonRed ------scram button3. DSP screen button functionOverride+I...

  • Page 9

    8Y+Positive shift of Y axis; input of number 8; switch betweenMCS and WCS with the help of auxiliary keyZ+Positive shift of Z axis; input of number 9X-Negative shift of X axis; input of number 4; returning tomechanical origin with the help of auxiliary key(0,0)Spindle start/stopStart or stop of s...

  • Page 10

    9StartStart key; breakpoint resuming with the help of auxiliary keyUpSuspend processing; up direction keyESCStop processing; cancellation of various selections, inputsand operationsShiftAuxiliary keyDownDown direction keyOKEntering manual high/low speed adjustment page undermenu page; confirmatio...

  • Page 11

    104. System Start-upPress: Machine Z X Y backing to mechanical origin.First time you can point,check relevant parameter.+0Floating presetting+Z clear+Breakpoint resuming+Entering help page

  • Page 12

    11Main parameter :Oper Param1. G00 speed: 8000mm/min(travelling speed)2. Gxx speed: 5000mm/min(working speed)3.Back REF first: no(Mfr param) Password (33587550)2 (axis outpdir)1. XPositive2. YPositive3. ZPositive (according to machinemoving direction change )3 (pulse equivalent) X :0.0098125 Y : ...

  • Page 13

    12Load the fileinstall U disk2 (Browse U disk file)1.load2.delete3. Copy ,choose 1 load life , then must press, show rightnumber on file, as picture,Then press ok, file is loaded .Make the workpiece origin :1) first move the machine spindle to left bottom of workpiece .

  • Page 14

    132) Then press, x and y axis clear 0 , x and y origin is ok3) Sharp of the tool touch the surface of workpiece .then press shift +, z axis clear 0 , zaxis origin is ok . As above picture .4)press this button , machine start to work.4. MaintenanceiThe new machines have the wear-in period. We shou...

  • Page 15

    14the beam, the conjunction of the soleplate and the side board, the couplerbetween the stepper motor and the Y axis ballscrew, the fixed screw in the front of the ball screw.Fixed ScrewSide BoardLinearSoleplateFixed Screwii Maintenance after use.⑴Clear the machine after use.⑵Filling oil afte...

  • Page 16

    15spontaneous droop of the ball screw which will influence the concentric degree andthe accuracy.5. When encounter smoking, awful smell, noise and other abnormal situation of themachine, please turn off the machine and check it.6. Make sure the machine connect with the ground wire.7. Don’t touc...

  • Page 17

    164. Check the tightness of synchronous belt and adjust it in time.X-axis Beam Fixed ScrewDriving Box Fixed ScrewBall ScrewDriving BoxHigh Speed Direction7. Electronic Parts.The map of electronic parts of CNC router. Pic.6Maintenance of electronic parts:1. Clean the motor and the dust in the cont...

  • Page 18

    17When the machine isrunningthedrivensystem arise noise andhave the phenomenonto be block.There is dust in the ball screw or thelacking of the oil.Discharge the bearing and cleanit or change, then add oil andassemble.The limit switch lostthe function or thescreen show the limitalarm in a long tim...

  • Page 19

    189.AppendixThe parameter of cutterDifferent materials should be different cutter and parameters.Materials:Dual-color board, ABS board, organic glass, PVC board, metal (iron, alloy, brass,aluminum), glass, stone, wood, high density board, anti-firing plate, chipboard,composite material (brass boa...

  • Page 20

    1940 ゜above/0.3above20000~40000400000.30.6~2.40.1~0.40.1For stone cutting please take the above parameters for reference, the harder stones should deduce thespeed.4. WoodMaterialCutterRotate Speed(r/min)CutSpeed(m/min)Travel Speed(m/min)RemarksEngrave200-300/0.1-0.3 20000-400000.8-2.40.5-2300 /...

  • Page 21

    20If the cutter is small and the material is hard, deduce the depth of cutter on the clampand deduce the cutting speed. If it needs the big depth for the cutter, deduce the speedof spindle. If you need the high light degree for your products, deduce of cutter on theclamp, improve the speed of spi...

x