Navigation

  • Page 1

    10,000 RPM Pulley SetP/N 4335 (Pulley set only for retrofit)P/N 33070 (Complete Headstock/motor/speed control)SHERLINEPRODUCTSINCORPORATED 19746/12/09SHERLINE PRODUCTS INC. ˆ 3235 Executive Ridge ˆ Vista ˆ California 92081-8527 ˆ FAX: (760) 727-7857Toll Free Order Line: (800) 541-0735 ˆ Inte...

  • Page 2

    Pg. 2 of 4, P/N 43352. Remove the socket head screw that holds the speedcontrol housing in place and pivot the speed controlupward on its hinge pins to expose the motor pulley. Liftout the cover mounting plate (P/N 43130), which ispositioned between the two halves of the belt guard.(Note its po...

  • Page 3

    9. Push the motor assembly away from the spindle to putsufficient tension in the drive belt and tighten the screwsin the motor mount to hold it in position. The belt doesnot have to be extremely tight to work properly. Pressingon the belt with your finger halfway between the pulleys,you should be...

  • Page 4

    Parts for P/N 4335 10,000 RPM pulley setP/NREQ.DESCRIPTION1207019/64" Hex key (not shown)2097028-32 x 1/2" SHCS31080110-32 x 3/8" Flat point set screw40690210-32 x 3/4" SHCS433651Outer standoff half433661Inner standoff half43367110,000 RPM Spindle pulley43368110,000 RPM Motor ...

x