Navigation

  • Page 1

     Table of contentsTablesFiguresSINUMERIKSINUMERIK 840D slSystem variablesParameter ManualValid for SINUMERIK 840D sl / 840DE sl control Software version CNC software  4.5 SP203/2...

  • Page 2

    Legal information - Warning notice systemLegal informationWarning notice systemThis manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safe...

  • Page 3

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA13PrefaceSINUMERIK documentationThe SINUMERIK documentation is organized in the following categories:• General documentation• User documentation• Manufacturer/service documentationAdditional informationYou can find information on t...

  • Page 4

    Preface System variables4 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1SINUMERIKYou can find information on SINUMERIK under the following link: actionURI(http://www.siemens.com/sinumerik):www.siemens.com/sinumerikTarget groupThis publication is intended for project engineers, commissioning engine...

  • Page 5

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA15Table of contentsTable of contentsPreface.................................................................................................................................................. 3,.......31List of system variables ..............

  • Page 6

    Table of contentsSystem variables6 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.29User-specific system variables .............................................................................................. 618,.. 618, 6181.30Kinematic chain .......................................................

  • Page 7

    1System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA17List of system variables1.1Properties of system variablesYou will find the information below in the table entries of the system variables:Data type, variable name, if necessary with index 1 ...n, short name (may not yet be defined), r...

  • Page 8

    List of system variables1.2 R parametersSystem variables8 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.1.1Arrangement of system variable information1.2R parametersTypeIdentifier [Field limit 1,Field limit 2,]Short namereference:Reference toliteraturedescription: Description lines ...Index 1:Des...

  • Page 9

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA19List of system variables1.3 Channel-specific synchronized action variables1.3Channel-specific synchronized action variablesINT$AC_MARKER [n]User array variable of type Integerreference:description: Array variable $AC_MARKER[n] is used ...

  • Page 10

    List of system variables1.4 Channel-specific system variablesSystem variables10 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.4Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:runin stpX7-0Xaxi...

  • Page 11

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA111List of system variables1.4 Channel-specific system variablesFRAME$P_SETFRAME Active system frame for preset actual value memoryreference:description: Variable $P_SETFRAME is used to program the active system frame for preset actual v...

  • Page 12

    List of system variables1.4 Channel-specific system variablesSystem variables12 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_TOOLFRAME Active system frame for TOROTreference:d...

  • Page 13

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA113List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7-0-axis identifier:GEOCHANMACHSPINValuation:channel-specifi...

  • Page 14

    List of system variables1.4 Channel-specific system variablesSystem variables14 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_NCBFRAME [n]Active global basic framereference:description: Array variable $P_NCBFRAME[n] is used to program the nth active global basic frame.On a Reset, the activ...

  • Page 15

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA115List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7-0-axis identifier:GEOCHANMACHSPINValuation:channel-specifi...

  • Page 16

    List of system variables1.4 Channel-specific system variablesSystem variables16 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_ACTFRAME Active overall framereference:description: The variable $P_ACTFRAME determines the active chained total frame. The active total frame is calculated using t...

  • Page 17

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA117List of system variables1.4 Channel-specific system variablesmin.:0max.:0xFFFFstd:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-...

  • Page 18

    List of system variables1.4 Channel-specific system variablesSystem variables18 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1n = 27 $TC_DPHn = 28 $TC_DPVn = 29 $TC_DPV3n = 30 $TC_DPV4n = 31 $TC_DPV5n = 32 $TC_DPVN3n = 33 $TC_DPVN4n = 34 $TC_DPVN5n = 35 $TC_DPNTAn alarm ...

  • Page 19

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA119List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchPr...

  • Page 20

    List of system variables1.4 Channel-specific system variablesSystem variables20 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Notice: Particularly with a setting of $MC_CUTTING_EDGE_DEFAULT=-2, $P_TOOLNO (the T no. of the active tool with which the currentlyactive D offset has been calculated) and...

  • Page 21

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA121List of system variables1.4 Channel-specific system variablesDOUBLE$P_TOOLO [3]Active tool orientationreference:description: $P_TOOLO[n]Active tool orientationIndex 1: n: Components 1 - 3 unit: -min.:-1,8E308max.:1,8E308s...

  • Page 22

    List of system variables1.4 Channel-specific system variablesSystem variables22 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_TOOLO_DIFF Remaining angle to the orientation in the active blockreference:description: $AC_TOOLO_DIFFRemaining angle of tool orientation in active blockunit: deg...

  • Page 23

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA123List of system variables1.4 Channel-specific system variablesINT$VC_TOOLO_STAT Status of the calculation of the actual orientationreference:description: $VC_TOOLO_STATStatus of calculation of actual orientationunit: -min.:-1max.:21474...

  • Page 24

    List of system variables1.4 Channel-specific system variablesSystem variables24 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_TCNUM Number of tool carriers available in the channelreference:description: $P_TCNUMNumber of available toolholders in the channelunit: -min.:-2147483648max.:2147483...

  • Page 25

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA125List of system variables1.4 Channel-specific system variablesINT$P_TCSOL Solution number for tool carrierreference:description: $P_TCSOLNumber of solutions when the angle of the axis of rotation of an orientable tool carrier is define...

  • Page 26

    List of system variables1.4 Channel-specific system variablesSystem variables26 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$P_TOOLR Active tool radiusreference:description: $P_TOOLRActive tool radius (total)unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:...

  • Page 27

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA127List of system variables1.4 Channel-specific system variablesINT$P_D Programmed D number (ISO2.1 mode)reference:description: $P_DProgrammed D number in ISO_2.1 language modeThe D number is the tool offset number in ISO mode 2.1 (milll...

  • Page 28

    List of system variables1.4 Channel-specific system variablesSystem variables28 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$A_TOOLMLN [32000]-reference:description: $A_TOOLMLN[t]Magazine locati...

  • Page 29

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA129List of system variables1.4 Channel-specific system variablesINT$A_MYMLN [32000]-reference:description: $A_MYMLN[t]Number of the home magazine location of the tool with T no. t.(A magazine location becomes the home magazine location o...

  • Page 30

    List of system variables1.4 Channel-specific system variablesSystem variables30 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$P_TOOLNT Number of defined toolsreference:description: $P_TOOLNTNumbe...

  • Page 31

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA131List of system variables1.4 Channel-specific system variablesmin.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:--0-0-axis identifier:Valu...

  • Page 32

    List of system variables1.4 Channel-specific system variablesSystem variables32 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$P_MAGN Number of defined magazinesreference:description: $P_MAGNNumbe...

  • Page 33

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA133List of system variables1.4 Channel-specific system variablesINT$P_MAGNDIS [32000,32000]Number of magazines connected to the internal magazinereference:description: P_MAGNDIS[ n, m ]Number of magazines connected to location m of inter...

  • Page 34

    List of system variables1.4 Channel-specific system variablesSystem variables34 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_MAGDISL [32000,32]Number of the magazine connected to the loading magazinereference:description: P_MAGDISL[ l, i ]Number of ith magazine connected to location I of th...

  • Page 35

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA135List of system variables1.4 Channel-specific system variablesINT$P_MAGS [20]Number of the spindle / toolholder in the bufferreference:description: $P_MAGS[ n ]nth number of spindle / of toolholder in buffer> 0Successful read access...

  • Page 36

    List of system variables1.4 Channel-specific system variablesSystem variables36 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_MAGREL [20,600]Buffer numberreference:description: P_MAGREL[ n, m ]mth buffer number of nth spindle number / toolholder number> 0Successful read access0m is outsid...

  • Page 37

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA137List of system variables1.4 Channel-specific system variablesINT$P_MAGNHLT [32]Number of defined location typesreference:description: $P_MAGNHLT[ n ]Number of defined location types in the nth defined hierarchy> 0Successful read ac...

  • Page 38

    List of system variables1.4 Channel-specific system variablesSystem variables38 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_MAGNA Number of defined adaptersreference:description: $P_MAGNANumber of defined adapters assigned to the channel.> 0Successful read access0No adapters defined-1'A...

  • Page 39

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA139List of system variables1.4 Channel-specific system variablesINT$P_MTHSDC Master spindle/toolholder for tool offsetreference:description: $P_MTHSDCMaster toolholder no. or master spindle no. with reference to which the active tool is ...

  • Page 40

    List of system variables1.4 Channel-specific system variablesSystem variables40 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchN...

  • Page 41

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA141List of system variables1.4 Channel-specific system variablesINT$P_TOOLENVN Number of tool environments availablereference:description: $P_TOOLENVNSpecifies the number of defined data blocks for defining tool environments.unit: -min.:...

  • Page 42

    List of system variables1.4 Channel-specific system variablesSystem variables42 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1AXIS$P_AXN2 Axis identifier for the ordinatereference:description: Variable $P_AXN2 supplies the current address of the geometry axis for the ordinate.unit: -min.:max.:std:...

  • Page 43

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA143List of system variables1.4 Channel-specific system variablesINT$P_GG [61]Active G functionreference:description: $P_GG[n]Read active G function of G function group n The index of the G function is supplied as described in the Program...

  • Page 44

    List of system variables1.4 Channel-specific system variablesSystem variables44 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_GG [61]Active G function in synchronized actionreference:description: $A_GG[n]Read active G function of G function group n in synchronized action The index of the G f...

  • Page 45

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA145List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedBOOL$P_SEARCH2 Block search without calculation was active reference:descri...

  • Page 46

    List of system variables1.4 Channel-specific system variablesSystem variables46 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$P_SUBPAR [n]Parameter programmedreference:description: $P_SUBPAR[n]Interrogate whether parameter n was actually programmed (TRUE) on subroutinecall with parameter tran...

  • Page 47

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA147List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedBOOL$P_DELAYFST -reference:description: $P_DELAYFSTInterrogation whether de...

  • Page 48

    List of system variables1.4 Channel-specific system variablesSystem variables48 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$P_MC Modal subroutine call activereference:description: $P_MCStatus of...

  • Page 49

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA149List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:Valuation:channel-specificblock searchNo...

  • Page 50

    List of system variables1.4 Channel-specific system variablesSystem variables50 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchIndependentlinkNo restrictionsINT$P_PROG_EVENT Event-driven program call activereference:description: Syst...

  • Page 51

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA151List of system variables1.4 Channel-specific system variablesSTRING$P_PROG [18]Program name of a program levelreference:description: $P_PROG[n]Supplies the name of the program on program level n.Example:$P_PROG[0]Supplies the name of ...

  • Page 52

    List of system variables1.4 Channel-specific system variablesSystem variables52 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_ISO_STACK Current program level in ISO modereference:description: $P_ISO_STACKThe variable supplies the current program level in ISO mode. Unlike Siemens mode, not ev...

  • Page 53

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA153List of system variables1.4 Channel-specific system variablesBOOL$P_ACTID [16]Modal synchronized action is programmedreference:description: Variable $P_ACTID[n] determines whether the first 16 modal synchronized actions with ID n are ...

  • Page 54

    List of system variables1.4 Channel-specific system variablesSystem variables54 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock searchN...

  • Page 55

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA155List of system variables1.4 Channel-specific system variables5: Block was generated by smoothing6: Block was generated by TLIFT (tangential follow-up)7: Block was generated by path segmentation8: Block was generated by compile cycles9...

  • Page 56

    List of system variables1.4 Channel-specific system variablesSystem variables56 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA15. Smoothing: $AC_BLOCKTYPE = 55001: Smoothing contour by means of G6415002: Smoothing contour by means of G6425003: Smoothing contour by means of G6435004: Smoothing conto...

  • Page 57

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA157List of system variables1.4 Channel-specific system variables<> 0: Block has been truncated or is an internally generated block, the variable can assume the following values (variable is bit-coded):= 1: It is an internally gen...

  • Page 58

    List of system variables1.4 Channel-specific system variablesSystem variables58 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_SYNC_MAX_LOAD Longest runtime for synchronized actionsreference:description: Variable $AC_SYNC_MAX_LOAD supplies the longest runtime for synchronized actions of a...

  • Page 59

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA159List of system variables1.4 Channel-specific system variablesINT$AC_IW_TU Position information of axes for PTPreference:description: Variable $AC_IW_TU describes the position information of the axes (MCS) for cartesian PTP travel.The ...

  • Page 60

    List of system variables1.4 Channel-specific system variablesSystem variables60 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_ROT_SYS Reference system for cart. manual trav. (ori.) reference:de...

  • Page 61

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA161List of system variables1.4 Channel-specific system variablesNote special meaning in the case of parameterized persistent transformation (bit 1 of $MC_TRAFO_MODE_MASK set to 1):The parameters of the first chained transformation are re...

  • Page 62

    List of system variables1.4 Channel-specific system variablesSystem variables62 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock...

  • Page 63

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA163List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$P_TRAFO_PARSET Transformation data set numberreference:description: $P_...

  • Page 64

    List of system variables1.4 Channel-specific system variablesSystem variables64 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_LIFTFAST Status of liftfastreference:description: $P_LIFTFASTInformation about execution of rapid lift.0: Initial state.1: Rapid lift has been executed.The variable i...

  • Page 65

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA165List of system variables1.4 Channel-specific system variablesBIT4: Activation due to: Activation due to: User interrupt "ASUB".To continue the program with Repos, the current position at the momentof interrupt is stored.Acti...

  • Page 66

    List of system variables1.4 Channel-specific system variablesSystem variables66 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BIT18: Activation due to: Activate machine dataActivation by: PiContinued by: Execution of system ASUB REPOSBIT19: Activation due to: Activate tool offsetActivation by: Pi...

  • Page 67

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA167List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNo...

  • Page 68

    List of system variables1.4 Channel-specific system variablesSystem variables68 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:runin stpX7X7Xaxis identifier:Valuation:channel-speci...

  • Page 69

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA169List of system variables1.4 Channel-specific system variablesDOUBLE$AC_FIFO2 [n]2. FIFO stackreference:description: Variable $AC_FIFO2[n] is a stack with first in first out characteristics. This stack memory can be used for cyclic mea...

  • Page 70

    List of system variables1.4 Channel-specific system variablesSystem variables70 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1The number of R variables must be set in machine data $MC_MM_NUM_R_PARAM such that all FIFO variables can be accommodated:$MC_MM_NUM_R_PARAM = $MC_MM_START_FIFO + $MC_NUM_A...

  • Page 71

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA171List of system variables1.4 Channel-specific system variablesn=4: Number of elements available in the FIFOn=5: Current write index relative to the start of the FIFOn=6: Oldest elementn=7: Second oldest etc.Index 1: The dimensio...

  • Page 72

    List of system variables1.4 Channel-specific system variablesSystem variables72 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:XX7-0Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_FIFO6 [n]6. FIFO stackreference:description: Variable $AC_FIFO6[...

  • Page 73

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA173List of system variables1.4 Channel-specific system variables$MC_START_AC_FIFO is used to specify the number of the start R variable, from which the FIFO elements are stored.R variables assigned to FIFO areas should not be written els...

  • Page 74

    List of system variables1.4 Channel-specific system variablesSystem variables74 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1n=3: Total of all FIFO elements if Bit0 in $MC_MM_MODE_FIFO is set.n=4: Number of elements available in the FIFOn=5: Current write index relative to the start of the FIFOn=...

  • Page 75

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA175List of system variables1.4 Channel-specific system variableswrite:XX7-0Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_FIFO10 [n]10. FIFO stackreference:description: Variable $AC_FIFO1...

  • Page 76

    List of system variables1.4 Channel-specific system variablesSystem variables76 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock...

  • Page 77

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA177List of system variables1.4 Channel-specific system variableswrite:XX7X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedBOOL$A_INCO [2]Comparator inputreference:description: Variable $A_INCO[n] i...

  • Page 78

    List of system variables1.4 Channel-specific system variablesSystem variables78 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:Mrun synX7-0Xaxis identifier:Valuation:channel-specif...

  • Page 79

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA179List of system variables1.4 Channel-specific system variablesINT$A_DLB [n]Link variable bytereference:description: Variable $A_DLB[n] enables reading and writing of a data byte (8 bits) which can be transmitted to other channels or NC...

  • Page 80

    List of system variables1.4 Channel-specific system variablesSystem variables80 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:Mrun synX7X7Xaxis...

  • Page 81

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA181List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock ...

  • Page 82

    List of system variables1.4 Channel-specific system variablesSystem variables82 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$A_PBB_OUT [32]PLC output bytereference:description: Array variable $A_...

  • Page 83

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA183List of system variables1.4 Channel-specific system variablesDOUBLE$A_PBR_OUT [32]Real PLC outputreference:description: Array variable $A_PBR_OUT[n] is used to write Real data (32 bits) to the PLC I/O.Index 1: The dimension is ...

  • Page 84

    List of system variables1.4 Channel-specific system variablesSystem variables84 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:XX7X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_TC_CMDT Trigger, tool management outputs a commandreference:descrip...

  • Page 85

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA185List of system variables1.4 Channel-specific system variableswrite:runin stpX7X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_TC_ACKC Number of PLC acknowledgements to tool management co...

  • Page 86

    List of system variables1.4 Channel-specific system variablesSystem variables86 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_TC_THNO -reference:description: $AC_TC_THNONumber of the toolholder...

  • Page 87

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA187List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock ...

  • Page 88

    List of system variables1.4 Channel-specific system variablesSystem variables88 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_TC_LFN -reference:description: $AC_TC_LFNSource location number of the new tool.0: There is no new tool.-1: No TM command is active at the instant the variable is re...

  • Page 89

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA189List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_TC_MFO -reference:description: $AC_TC_MFOSource magazine number of t...

  • Page 90

    List of system variables1.4 Channel-specific system variablesSystem variables90 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock...

  • Page 91

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA191List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock ...

  • Page 92

    List of system variables1.4 Channel-specific system variablesSystem variables92 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$A_SECOND System time: secondreference:description: $A_SECONDSystem tim...

  • Page 93

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA193List of system variables1.4 Channel-specific system variablesDOUBLE$AC_TIMES -reference:description: $AC_TIMESTime from block start (REAL) in seconds (excluding times for internally generated intermediate blocks).Each programmed block...

  • Page 94

    List of system variables1.4 Channel-specific system variablesSystem variables94 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_TIMER [1]User timerreference:description: Array variable $AC_TIM...

  • Page 95

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA195List of system variables1.4 Channel-specific system variablesDOUBLE$AC_PRTIME_A Precalculated program run time (idle time)reference:description: $AC_PRTIME_A "ProgramRunTIME-Auxilary"Reading and setting (initialization)...

  • Page 96

    List of system variables1.4 Channel-specific system variablesSystem variables96 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:--0-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_PATHN Normalized path parameterreference:description:...

  • Page 97

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA197List of system variables1.4 Channel-specific system variablesunit: -min.:-2147483648max.:4std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifie...

  • Page 98

    List of system variables1.4 Channel-specific system variablesSystem variables98 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:-X0X7Xwrite:--0-0-axis identifier:Valuati...

  • Page 99

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA199List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedBOOL$P_APDV Position values for SAR are validreference:description: $P_APDV...

  • Page 100

    List of system variables1.4 Channel-specific system variablesSystem variables100 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_F_G0 Max. rapid traverse in blockreference:description: Variable $AC_F_G0 returns the maximum rapid traverse velocity in the block.unit: mm/minmin.:-1,8E308max.:...

  • Page 101

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1101List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_TOTAL_OVR Overall path overridereference:description: The variab...

  • Page 102

    List of system variables1.4 Channel-specific system variablesSystem variables102 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_PATHACC Path acceleration for real-time eventsreference:description: $AC_PATHACCDefines an increased path acceleration for override changes and stop/start events...

  • Page 103

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1103List of system variables1.4 Channel-specific system variablesread:-X0X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_VACTW WCS path velocity of geometry axesreference:des...

  • Page 104

    List of system variables1.4 Channel-specific system variablesSystem variables104 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: rpmmin.:0max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identif...

  • Page 105

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1105List of system variables1.4 Channel-specific system variablesDOUBLE$P_SEARCH_S [n]Search run: speed, cutting ratereference:description: $P_SEARCH_S[n]n: Number of spindleLast programmed spindle speed collected during block searchor c...

  • Page 106

    List of system variables1.4 Channel-specific system variablesSystem variables106 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:3max.:5std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:SPINVa...

  • Page 107

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1107List of system variables1.4 Channel-specific system variablesIndex 1: n: Spindle number 0 ... max. spindle number for the spindle numbers configured in the MD 35000 SPIND_ASSIGN_TO_MACHAX. unit: -min.:0m...

  • Page 108

    List of system variables1.4 Channel-specific system variablesSystem variables108 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:1max.:5std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:Valuation:channel-spe...

  • Page 109

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1109List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$P_SEARCH_SGEAR [n]Search run: Gear stage M codereference:description: ...

  • Page 110

    List of system variables1.4 Channel-specific system variablesSystem variables110 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_SEARCH_SPOSMODE [n]Search run: Position approach modereference:description: $P_SEARCH_SPOSMODE[n]n: Number of spindlePosition approach mode last programmed via M19, ...

  • Page 111

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1111List of system variables1.4 Channel-specific system variablesINT$P_MSNUM Number of master spindlereference:description: $P_MSNUMReturns the number of the master spindle.0: No spindle programmed in channel1..n: Number of master spindl...

  • Page 112

    List of system variables1.4 Channel-specific system variablesSystem variables112 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_MTHNUM -reference:description: $AC_MTHNUM - meaningful only when m...

  • Page 113

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1113List of system variables1.4 Channel-specific system variableswrite:runin stpX7-0Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_FCT2LL Lower limit for 2nd polynomial functionreference:...

  • Page 114

    List of system variables1.4 Channel-specific system variablesSystem variables114 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_FCT2UL Upper limit for 2nd polynomial functionreference:description: Variable $AC_FCT2UL is used to define the upper limit for the second polynomial function.The...

  • Page 115

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1115List of system variables1.4 Channel-specific system variablesDOUBLE$AC_FCT2C [4]Coefficients for 2nd polynomial functionreference:description: Array variable $AC_FCT2C[n] is used to program polynomial coefficients a0 - a3 for the sec...

  • Page 116

    List of system variables1.4 Channel-specific system variablesSystem variables116 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_FCTUL [n]Upper limit of polynomial functionsreference:description: Array variable $AC_FCTUL[n] is used to define the upper limit for the nth polynomial function....

  • Page 117

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1117List of system variables1.4 Channel-specific system variableswrite:runin stpX7-0Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_FCT2 [n]3. coefficient of polynomial functionsreference:...

  • Page 118

    List of system variables1.4 Channel-specific system variablesSystem variables118 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis ident...

  • Page 119

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1119List of system variables1.4 Channel-specific system variableswrite:-X0-0Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_OPERATING_TIME Operating time of NC programs in AUTOMATIC modere...

  • Page 120

    List of system variables1.4 Channel-specific system variablesSystem variables120 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Bit 8 = 1 Cleared by a jump to program start with GOTOSBit 9 = 0 No measurement when override is 0%Bit 9 = 1 Measurement even when override is 0%Use in NC program...

  • Page 121

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1121List of system variables1.4 Channel-specific system variablesDOUBLE$AC_REQUIRED_PARTS Definition of the number of required workpiecesreference:description: $AC_REQUIRED_PARTS can be used to define the number of workpieceswhich, when ...

  • Page 122

    List of system variables1.4 Channel-specific system variablesSystem variables122 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:runin stpX7X7Xaxis identifier:Valuation:channel-spec...

  • Page 123

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1123List of system variables1.4 Channel-specific system variablesBit 14 = 0: $AC_SPECIAL_PARTS active even during program test/block searchBit 14 = 1: No processing of $AC_SPECIAL_PARTS during program test/block searchUse in NC program:$...

  • Page 124

    List of system variables1.4 Channel-specific system variablesSystem variables124 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:0max.:1std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:chan...

  • Page 125

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1125List of system variables1.4 Channel-specific system variableswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_MEAS_P2_COORD Coordinate system 2nd measuring pointreference:descri...

  • Page 126

    List of system variables1.4 Channel-specific system variablesSystem variables126 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_MEAS_P4_COORD Coordinate system 4th measuring pointreference:description: Variable for workpiece and tool measurement.Variable $AC_MEAS_P4_COORD is used to set the ...

  • Page 127

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1127List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchN...

  • Page 128

    List of system variables1.4 Channel-specific system variablesSystem variables128 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_MEAS_ACT_PLANE Working plane for workpiecereference:description: Variable for workpiece and tool measurement.Variable $AC_MEAS_ACT_PLANE is used to define the worki...

  • Page 129

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1129List of system variables1.4 Channel-specific system variables10..25:$P_CHBFRAME[0..15]50..65:$P_NCBFRAME[0..15]100..199:$P_IFRAME500:$P_TOOLFRAME501:$P_WPFRAME502:$P_TRAFRAME503:$P_PFRAME504:$P_CYCFRAME505: $P_REL...

  • Page 130

    List of system variables1.4 Channel-specific system variablesSystem variables130 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identi...

  • Page 131

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1131List of system variables1.4 Channel-specific system variablesINT$AC_MEAS_UIFR Frame selection for settable framesreference:description: Variable for workpiece and tool measurement.In order to convert a position from one coordinate sy...

  • Page 132

    List of system variables1.4 Channel-specific system variablesSystem variables132 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_MEA...

  • Page 133

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1133List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchN...

  • Page 134

    List of system variables1.4 Channel-specific system variablesSystem variables134 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_MEAS_VALID Validity bits of measurement variables.reference:descri...

  • Page 135

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1135List of system variables1.4 Channel-specific system variableswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedFRAME$AC_MEAS_FRAME Result frame for workpiece measurementreference:descri...

  • Page 136

    List of system variables1.4 Channel-specific system variablesSystem variables136 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AC_MEAS_DIAMETER Tool diameterreference:description: Variable for ...

  • Page 137

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1137List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AC_MEAS_SCALEUNIT Measurement unitreference:description: Variable for ...

  • Page 138

    List of system variables1.4 Channel-specific system variablesSystem variables138 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock search...

  • Page 139

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1139List of system variables1.4 Channel-specific system variableswrite:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_CHBFR1 Access to 2nd channel basic framereference:desc...

  • Page 140

    List of system variables1.4 Channel-specific system variablesSystem variables140 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_CHBFR4 Access to 5th channel basic framereference:description: Access to 5th channel basic frame. Corresponds to $P_CHBFR[4].unit: -min.:max.:std:Properties with r...

  • Page 141

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1141List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 142

    List of system variables1.4 Channel-specific system variablesSystem variables142 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_CHBFR11 Access to 12th channel basic framereference:description: Access to 12th channel basic frame. Corresponds to $P_CHBFR[11].unit: -min.:max.:std:Properties wi...

  • Page 143

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1143List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 144

    List of system variables1.4 Channel-specific system variablesSystem variables144 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_NCBFR2 Access to 3rd NCU-global basic framereference:description: Access to 3rd NCU-global basic frame. Corresponds to $P_NCBFR[2].unit: -min.:max.:std:Properties ...

  • Page 145

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1145List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 146

    List of system variables1.4 Channel-specific system variablesSystem variables146 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_NCBFR9 Access to 10th NCU-global basic framereference:description: Access to 10th NCU-global basic frame. Corresponds to $P_NCBFR[9].unit: -min.:max.:std:Propertie...

  • Page 147

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1147List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 148

    List of system variables1.4 Channel-specific system variablesSystem variables148 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_CHBFRAME0 Access to 1st current channel basic framereference:description: Access to 1st current channel basic frame. Corresponds to $P_CHBFRAME[0].unit: -min.:max....

  • Page 149

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1149List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 150

    List of system variables1.4 Channel-specific system variablesSystem variables150 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_CHBFRAME7 Access to 8th current channel basic framereference:description: Access to 8th current channel basic frame. Corresponds to $P_CHBFRAME[7].unit: -min.:max....

  • Page 151

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1151List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 152

    List of system variables1.4 Channel-specific system variablesSystem variables152 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_CHBFRAME14 Access to 15th current channel basic frame reference:description: Access to 15th current channel basic frame. Corresponds to $P_CHBFRAME[14].unit: -min....

  • Page 153

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1153List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 154

    List of system variables1.4 Channel-specific system variablesSystem variables154 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_NCBFRAME5 6. 1st current NCU-global basic framereference:description: Access to 6th current NCU-global basic frame. Corresponds to $P_NCBFRAME[5].unit: -min.:max.:...

  • Page 155

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1155List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 156

    List of system variables1.4 Channel-specific system variablesSystem variables156 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_NCBFRAME12 13. 1st current NCU-global basic framereference:description: Access to 13th current NCU-global basic frame. Corresponds to $P_NCBFRAME[12].unit: -min.:m...

  • Page 157

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1157List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:GEOCHANMACHValuation:channel-specificbl...

  • Page 158

    List of system variables1.4 Channel-specific system variablesSystem variables158 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificbloc...

  • Page 159

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1159List of system variables1.4 Channel-specific system variablesINT$A_DBSW [1024]PLC data word (signed)reference:description: Array variable $A_DBSW[n] is used to read and write a data word (16 bits) from PLC. The word is signed and can...

  • Page 160

    List of system variables1.4 Channel-specific system variablesSystem variables160 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchProgram sensitivelinkNo restrictionsBOOL$P_SUB_AUTOGEAR Automatic gear stage change activereference:descr...

  • Page 161

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1161List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchProgram sensitivelinkNo restrictionsSTRING$P_BLOCKNO [18]Modal block number level-specificreference:descri...

  • Page 162

    List of system variables1.4 Channel-specific system variablesSystem variables162 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_AUTO_JOG_STATE Status Jog in Autoreference:description: 1: Automatic is selected, $MN_JOG_MODE_MASK is set and the mode group is "BAG-Reseted". By...

  • Page 163

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1163List of system variables1.4 Channel-specific system variablesunit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:XX7-0Xaxis ide...

  • Page 164

    List of system variables1.4 Channel-specific system variablesSystem variables164 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_AUXFU_M_STATE [168]Output state of axtive m-auxiliary functionreference:description: The array variable $AC_AUXFU_M_STATE[n] is used to read the output status of th...

  • Page 165

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1165List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$P_THREAD_PITCH_INC programmed thread pitch incrementreference:descr...

  • Page 166

    List of system variables1.4 Channel-specific system variablesSystem variables166 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_THREAD_PITCH_INC current thread pitch incrementreference:description: $AC_THREAD_PITCH_INC provides the value programmed under the address F for lead change (G34...

  • Page 167

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1167List of system variables1.4 Channel-specific system variablesIf no tool is active, the following unit vector is returned, depending on the active plane:G17: (0, 1, 0)G18: (1, 0, 0)G19: (0, 0, 1)Index 1: n: Components 1 - 3 ...

  • Page 168

    List of system variables1.4 Channel-specific system variablesSystem variables168 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA12: y-component3: z-componentIf no tool is active, the following unit vector is returned, depending on the active plane:G17: (0, 1, 0)G18: (1, 0, 0)G19: (0, 0, 1)Index 1: ...

  • Page 169

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1169List of system variables1.4 Channel-specific system variablesunit: -min.:-1.0max.:1.0std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:...

  • Page 170

    List of system variables1.4 Channel-specific system variablesSystem variables170 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$P_SIMUL Simulation search run activereference:description: Value==TRUEThe part program is executed in the control under the Simulation search run mode.The simulation ...

  • Page 171

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1171List of system variables1.4 Channel-specific system variablesINT$A_USEDND [128]Workpiece counts for cutting edgesreference:description: $A_USEDND[ toolHolder ]The number of cutting edges used in tool holder s, counted since the last ...

  • Page 172

    List of system variables1.4 Channel-specific system variablesSystem variables172 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_USEDD [128,1500]Workpiece counts for cutting edgesreference:description: $A_USEDD[ toolHolder, usedCuttingEdgeIndex ]D-Number for the i-th cutting edge used with too...

  • Page 173

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1173List of system variables1.4 Channel-specific system variablesDOUBLE$AC_CONE_ANGLE Cone anglereference:description: $AC_CONE_ANGLECurrently active cone angle for cone turning. The cone angle is set by default via the setting data $SC_...

  • Page 174

    List of system variables1.4 Channel-specific system variablesSystem variables174 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHValuation:channel-s...

  • Page 175

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1175List of system variables1.4 Channel-specific system variablesDOUBLE$AC_WORKAREA_CS_LIMIT_MINUS [n] Coordinate system-specific working area limitation negativereference:description: The limitation in the negative direction for the sta...

  • Page 176

    List of system variables1.4 Channel-specific system variablesSystem variables176 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_ISO1FRAME Active system frame for ISO G51.1 mirroring reference:description: Variable $P_ISO1FRAME is used to program the active system frame for ISO G51.1 mirrori...

  • Page 177

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1177List of system variables1.4 Channel-specific system variableswrite:X-7-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_ISO4FRAME Active system frame for ISO G51 Scaleref...

  • Page 178

    List of system variables1.4 Channel-specific system variablesSystem variables178 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$P_CUT_INV Invert direction of spindle rotationreference:description: $P_CUT_INVThis system variable is used to indicate whether or not the direction of spindle rotati...

  • Page 179

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1179List of system variables1.4 Channel-specific system variablesINT$P_CUTMOD The last programmed value of CUTMODreference:description: $P_CUTMODReads the current valid value that was last programmed with the language command CUTMOD (num...

  • Page 180

    List of system variables1.4 Channel-specific system variablesSystem variables180 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_CUTMOD_ANG Tool rotation angle in the active machining planereference:description: The variable $AC_CUTMOD_ANG determines the angle through which a tool has been...

  • Page 181

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1181List of system variables1.4 Channel-specific system variablesBOOL$P_SUB_M19 Language substitution M19 active.reference:description: Returns an NC language substitution TRUE (1) configured with $MA_AXIS_LANG_SUB_MASK bit1 = 1 in the s...

  • Page 182

    List of system variables1.4 Channel-specific system variablesSystem variables182 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:Valuation:channel-specificblock search...

  • Page 183

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1183List of system variables1.4 Channel-specific system variablesDOUBLE$AC_OLD_PROG_NET_TIME Runtime of the last NC programreference:description: oldProgNetTime is the net runtime of the just correctly ended program in seconds, that is t...

  • Page 184

    List of system variables1.4 Channel-specific system variablesSystem variables184 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_OLD_PROG_NET_TIME_COUNT Changes to oldProgNetTimereference:description: Is zero in the power ON status. oldProgNetTimeCount is always increased when the NCK has new...

  • Page 185

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1185List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:GEOValuation:channel-specificblock sear...

  • Page 186

    List of system variables1.4 Channel-specific system variablesSystem variables186 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_TOFF [n]Programmed tool length offsetreference:description: $AC_TOFFProgrammed tool length offset.The variable returns the tool length offset which is assigned t...

  • Page 187

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1187List of system variables1.4 Channel-specific system variablesDOUBLE$P_TOFFR Programmed tool radius offsetreference:description: $P_TOFFRProgrammed tool radius offset.The variable returns the tool radius offset programmed with TOFFR.u...

  • Page 188

    List of system variables1.4 Channel-specific system variablesSystem variables188 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1FRAME$P_RELFRAME Active system frame for relative coordinate systemsreference:description: The variable $P_RELFRAME is used for programming the active system frame for rel...

  • Page 189

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1189List of system variables1.4 Channel-specific system variableswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$P_INCOAP_I [n]Parameters for COA applicationreference:description: Def...

  • Page 190

    List of system variables1.4 Channel-specific system variablesSystem variables190 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedSTRING$P_INCOAP_S32 [n]Parameters for COA applicationreference:descriptio...

  • Page 191

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1191List of system variables1.4 Channel-specific system variablesINT$P_INCOAP_SIZE [n]Size of parameter fields for COA application reference:description: $P_INCOAP_SIZE[ ] returns the currently available array size of the defining and re...

  • Page 192

    List of system variables1.4 Channel-specific system variablesSystem variables192 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$AC_SMAXVELO_INFO [n]Identifier for the speed-limiting datareference:desc...

  • Page 193

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1193List of system variables1.4 Channel-specific system variablesIndex 1: n: Spindle number 0 ... max. spindle number for the spindle numbers configured in the MD 35000 SPIND_ASSIGN_TO_MACHAX. unit: -min.:0m...

  • Page 194

    List of system variables1.4 Channel-specific system variablesSystem variables194 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA12 Lower speed limit (minimum speed) of the current gear stage MD 35140 GEAR_STEP_MIN_VELO_LIMIT3 Not used 4 Not used)5 Lower speed limit (minimum speed) from S...

  • Page 195

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1195List of system variables1.4 Channel-specific system variablesINT$AC_SMAXACC_INFO [n]Identifier for the active spindle acceleration datareference:description: $AC_SMAXACC_INFO[n]n: Number of the spindleIdentifier (info) for the machin...

  • Page 196

    List of system variables1.4 Channel-specific system variablesSystem variables196 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$AC_SPIND_STATE [n]Status of the spindle in speed control mode reference:...

  • Page 197

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1197List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$P_ISO2_HNO [n]H number in ISO2 modereference:description: Contains the of...

  • Page 198

    List of system variables1.4 Channel-specific system variablesSystem variables198 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_ISO3_DNO D number in ISO3 modereference:description: Contains the offset number of H selected for ISO3 modeValue = -1: H99 is programmed, or it has been activated in...

  • Page 199

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1199List of system variables1.4 Channel-specific system variablesDOUBLE$AC_PREP_MIN_LOAD Shortest preprocessing runtimereference:description: The variable $AC_PREP_MIN_LOAD returns the shortest net preprocessing runtime in the channel.un...

  • Page 200

    List of system variables1.4 Channel-specific system variablesSystem variables200 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7-write:XX7-0-axis identifier:Valuation:channel-specificblock search...

  • Page 201

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1201List of system variables1.4 Channel-specific system variablesDOUBLE$AC_OTOL Active orientation tolerancereference:description: $AC_OTOL defines the orientation tolerance for compressors and smoothing with which the current main run b...

  • Page 202

    List of system variables1.4 Channel-specific system variablesSystem variables202 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_FGROUP_MASK Bit-coded value of axes that contribute to the path velocityreference:description: The variable returns a bit-coded value of channel axes programmed wi...

  • Page 203

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1203List of system variables1.4 Channel-specific system variablesINT$AC_AUXFU_STATE [168]Output status of the active auxiliary function reference:description: The array variable $AC_AUXFU_STATE[n] is used to read the output status of the...

  • Page 204

    List of system variables1.4 Channel-specific system variablesSystem variables204 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_AUXFU_TICK [168,2]Output counter of the active auxiliary function reference:description: The array variable $AC_AUXFU_TICK[groupIndex, n] is used to read the three ...

  • Page 205

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1205List of system variables1.4 Channel-specific system variablesINT$AC_AUXFU_PREDEF_INDEX [168]Predefined index of the active auxiliary functionreference:description: The array variable $AC_AUXFU_PREDEF_INDEX[n] is used to read the pred...

  • Page 206

    List of system variables1.4 Channel-specific system variablesSystem variables206 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Bit 16 = 1 Nibbling offBit 17 = 1 Nibbling onBit 18 = 1 NibblingIndex 1: The index corresponds to the auxiliary function group number decremented by one. unit...

  • Page 207

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1207List of system variables1.4 Channel-specific system variablesDOUBLE$P_FZ Programmed tooth feedreference:description: The variable $P_FZ is used to read the last programmed tooth feed FZ.unit: mm/minmin.:-1,8E308max.:1,8E308std:0Prope...

  • Page 208

    List of system variables1.4 Channel-specific system variablesSystem variables208 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7-write:--0-0-axis identifier:Valuation:channel-specificbloc...

  • Page 209

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1209List of system variables1.4 Channel-specific system variablesINT$P_S_TYPE [1]Type of spindle programmingreference:description: The variable $P_S_TYPE is used to read the type of spindle programming. 0 Spindle not programmed 1 S...

  • Page 210

    List of system variables1.4 Channel-specific system variablesSystem variables210 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$VC_SGEAR [n]Currently activated spindle gear stagereference:description: The variable $VC_SGEAR[spino] determines the currently activated spindle gear stage. $AC_SGEAR...

  • Page 211

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1211List of system variables1.4 Channel-specific system variablesDOUBLE$P_ORI_DIFF [2,3]Deviation of axis positions from theor. value in the case of orientation progr.reference:description: The difference between the exact positions of t...

  • Page 212

    List of system variables1.4 Channel-specific system variablesSystem variables212 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Bit 0 (value 100): The position of the 1st orientation axis is not defined.Bit 1 (value 200): The position of the 2nd orientation axis is not defined.Bit 2 (Wert 400): The...

  • Page 213

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1213List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$P_MTOOLN Number of defined Multitoolsreference:description: $P_MTOOLN...

  • Page 214

    List of system variables1.4 Channel-specific system variablesSystem variables214 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$P_MTOOLT [32000,32]T number of the i-th tool in MTreference:descript...

  • Page 215

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1215List of system variables1.4 Channel-specific system variablesunit: -min.:-3max.:32000std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:--0-0-axis identifier:Valuation:...

  • Page 216

    List of system variables1.4 Channel-specific system variablesSystem variables216 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AC_TC_TOOLIS Is a simple tool or a Multitool transported?reference:description: $AC_TC_TOOLIS-1: At the time of reading, no tool command is active. 0: the transported ...

  • Page 217

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1217List of system variables1.4 Channel-specific system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock...

  • Page 218

    List of system variables1.4 Channel-specific system variablesSystem variables218 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AC_PRTIME_B calculated program runtime (block by block) reference:description: $AC_PRTIME_B "ProgramRunTIME-Block"Reading the precalculated program r...

  • Page 219

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1219List of system variables1.4 Channel-specific system variableswrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$P_TMNOIS [32000]Actual number, T number, magazine number or MT numberr...

  • Page 220

    List of system variables1.4 Channel-specific system variablesSystem variables220 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_WP_STAT Error status after calling the WORKPIECE processreference:description: Contains the error status of the last call of the WORKPIECE processThe variable is cod...

  • Page 221

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1221List of system variables1.4 Channel-specific system variables10: No protection zone type specified.11: Less than three parameters were specified for the protection zone type "Box".12: Less than two parameters were specified...

  • Page 222

    List of system variables1.4 Channel-specific system variablesSystem variables222 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1AXIS$PC_TRAFO_ROT_CHAN_AX_IN [2]Channel axis of the n-th rotary axis of a transformerreference:description: Supplies the channel axis identifier of the i-th rotary axis (o...

  • Page 223

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1223List of system variables1.4 Channel-specific system variablesunit: -min.:max.:std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:--0-0-axis identifier:Valuation:channel...

  • Page 224

    List of system variables1.4 Channel-specific system variablesSystem variables224 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:Valuation:channel-specificblock search...

  • Page 225

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1225List of system variables1.4 Channel-specific system variablesDOUBLE$AC_SIM_TIME_BLOCK Current real machining time of a blockreference:description: The variable $AC_SIM_TIME_BLOCK determines the current real machining time of a block ...

  • Page 226

    List of system variables1.5 FramesSystem variables226 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.5FramesDOUBLE$AC_COLLPOS Collision position in world coordinate system reference:description: Point of contact of two collision bodies when a collision alarm occurs.unit: Linear / angular position...

  • Page 227

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1227List of system variables1.5 Frameswrite:X-7X7-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_SETFR Data management frame for preset actual value memoryreference:descripti...

  • Page 228

    List of system variables1.5 FramesSystem variables228 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_TOOLFR Data management frame for TOROT and TOFRAMEreference:description: Var...

  • Page 229

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1229List of system variables1.5 Frameswrite:X-7X7-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_TRAFR Data management frame for transformations reference:description: Variab...

  • Page 230

    List of system variables1.5 FramesSystem variables230 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNo restrictionsFRAME$P_ISO3FR Data management frame for ISO G68 3DROTreference:description: Variabl...

  • Page 231

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1231List of system variables1.6 Tool carrier data1.6Tool carrier dataBit 11 in $MC_CHSFRAME_RESET_CLEAR_MASKBit 11 in $MC_CHSFRAME_POWERON_MASKunit: -min.:max.:std:Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOP...

  • Page 232

    List of system variables1.6 Tool carrier dataSystem variables232 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-spec...

  • Page 233

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1233List of system variables1.6 Tool carrier dataDOUBLE$TC_CARR4 [n]X component of offset vector l2reference:description: $TC_CARR4[n]X component of offset vector l2Index 1: The max. number of tool carriers can be set via ...

  • Page 234

    List of system variables1.6 Tool carrier dataSystem variables234 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_CARR7 [n]X component of rotary axis v1reference:description: $TC_CARR7[n]X com...

  • Page 235

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1235List of system variables1.6 Tool carrier dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlin...

  • Page 236

    List of system variables1.6 Tool carrier dataSystem variables236 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: The max. number of tool carriers can be set via the machine data. Default value = 0; i.e. NCK has no such data. unit: -min.:-1,8E308max.:1,8E308std:0...

  • Page 237

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1237List of system variables1.6 Tool carrier dataDOUBLE$TC_CARR15 [n]X component of offset vector l3reference:description: $TC_CARR15[n]X component of offset vector l3Index 1: The max. number of tool carriers can be set vi...

  • Page 238

    List of system variables1.6 Tool carrier dataSystem variables238 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_CARR18 [n]X component of offset vector l4reference:description: $TC_CARR18[n]X...

  • Page 239

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1239List of system variables1.6 Tool carrier dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlin...

  • Page 240

    List of system variables1.6 Tool carrier dataSystem variables240 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1M: Rotatable tool and rotatable workpiece (Mixed)T or any other character apart from P and M: Rotatable toolIndex 1: The max. number of tool carriers can be set via the mac...

  • Page 241

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1241List of system variables1.6 Tool carrier dataDOUBLE$TC_CARR26 [n]Offset of 1st rotary axis with Hirth teethreference:description: $TC_CARR26[n]Specifies the offset of the 1st rotary axis if its position is not continuously variable (...

  • Page 242

    List of system variables1.6 Tool carrier dataSystem variables242 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1In this equations = $TC_CARR28d = $TC_CARR26If $TC_CARR28 equals zero, $TC_CARR26 and $TC_CARR28 are not used.The settings in machine data$MC_TOCARR_ROT_ANGLE_INCR[i] and $MC_TOCARR_ROT_...

  • Page 243

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1243List of system variables1.6 Tool carrier dataDOUBLE$TC_CARR30 [n]Minimum position of 1st rotary axisreference:description: $TC_CARR30[n]Specifies the minimum position of the 1st rotary axis. For full description, see $TC_CARR32Index ...

  • Page 244

    List of system variables1.6 Tool carrier dataSystem variables244 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedli...

  • Page 245

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1245List of system variables1.6 Tool carrier datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsSTRING$TC_CARR35 [n]Freely available string (1st rotary axis name) reference:description:...

  • Page 246

    List of system variables1.6 Tool carrier dataSystem variables246 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$TC_CARR37 [n]Freely available numeric identifier (tool carrier number)reference:description: $TC_CARR37[n]Contains an integer number for identifying the toolholder.Within the NCK, how...

  • Page 247

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1247List of system variables1.6 Tool carrier dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlin...

  • Page 248

    List of system variables1.6 Tool carrier dataSystem variables248 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: The max. number of tool carriers can be set via the machine data. Default value = 0; i.e. NCK has no such data. unit: mmmin.:-1,8E308max.:1,8E308std:...

  • Page 249

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1249List of system variables1.6 Tool carrier dataDOUBLE$TC_CARR45 [n]Fine offset Y of the offset vector l2reference:description: $TC_CARR45[n]Y component of fine offset of offset vector l2Index 1: The max. number of tool carriers ...

  • Page 250

    List of system variables1.6 Tool carrier dataSystem variables250 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_CARR56 [n]Fine offset Y of the offset vector l3reference:description: $TC_CARR...

  • Page 251

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1251List of system variables1.6 Tool carrier dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlin...

  • Page 252

    List of system variables1.7 Channel-specific protectSystem variables252 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.7Channel-specific protectIndex 1: The max. number of tool carriers can be set via the machine data. Default value = 0; i.e. NCK has no such data. uni...

  • Page 253

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1253List of system variables1.7 Channel-specific protectmin.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-sp...

  • Page 254

    List of system variables1.7 Channel-specific protectSystem variables254 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot class...

  • Page 255

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1255List of system variables1.7 Channel-specific protectProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classi...

  • Page 256

    List of system variables1.7 Channel-specific protectSystem variables256 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$SC_PA_CONT_TYP [n,m]Type of the contour elementreference:descripti...

  • Page 257

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1257List of system variables1.7 Channel-specific protectmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channe...

  • Page 258

    List of system variables1.8 Tool parametersSystem variables258 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.8Tool parametersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock search...

  • Page 259

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1259List of system variables1.8 Tool parametersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkN...

  • Page 260

    List of system variables1.8 Tool parametersSystem variables260 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DP4 [32000,32000]-reference:description: $TC_DP4[t,d]Geometry - length 2When the 'flat D number management' function is active, the syntax is as follows:$TC_DP4[d]Index 1: ...

  • Page 261

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1261List of system variables1.8 Tool parametersunit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel...

  • Page 262

    List of system variables1.8 Tool parametersSystem variables262 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DP9 [32000,32000]-reference:description: $TC_DP9[t,d]ReservedWhen the 'flat D number management' function is active, the syntax is as follows:$TC_DP9[d]Index 1: t: T number...

  • Page 263

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1263List of system variables1.8 Tool parametersunit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-...

  • Page 264

    List of system variables1.8 Tool parametersSystem variables264 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DP14 [32000,32000]-reference:description: $TC_DP14[t,d]Wear - length 3 - $TC_DP5When the 'flat D number management' function is active, the syntax is as follows:$TC_DP14[d]Index 1...

  • Page 265

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1265List of system variables1.8 Tool parametersunit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel...

  • Page 266

    List of system variables1.8 Tool parametersSystem variables266 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DP19 [32000,32000]-reference:description: $TC_DP19[t,d]Wear - angle between tool face and toroidal surface - $TC_DP10When the 'flat D number management' function is active, the sy...

  • Page 267

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1267List of system variables1.8 Tool parametersunit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel...

  • Page 268

    List of system variables1.8 Tool parametersSystem variables268 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DP24 [32000,32000]-reference:description: $TC_DP24[t,d]Clearance angleWhen the 'flat D number management' function is active, the syntax is as follows:$TC_DP24[d]Index 1: t...

  • Page 269

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1269List of system variables1.8 Tool parametersIndex 1: t: T number 1 - 32000 Index 2: d: Cutting edge number / D number 1 - 32000 unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/wri...

  • Page 270

    List of system variables1.8 Tool parametersSystem variables270 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DPV3 [32000,32000]-reference:description: $TC_DPV3[t,d] = L1 component of tool cutting edge orientationWhen the 'flat D number management' function is active, the syntax is as fol...

  • Page 271

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1271List of system variables1.8 Tool parametersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkN...

  • Page 272

    List of system variables1.8 Tool parametersSystem variables272 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_DPVN5 [32000,32000]L3 component of the orientation normalreference:description: $TC_DPVN5[t,d] = L3 component of the orientation normal of the tool cutting edge.If the function 'f...

  • Page 273

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1273List of system variables1.9 Cutting edge data for OEM users1.9Cutting edge data for OEM usersDOUBLE$TC_DPC1 [32000,32000]-reference:description: The type can be specified by machine data. DOUBLE is the default setting$TC_DPC1[t,d]Whe...

  • Page 274

    List of system variables1.9 Cutting edge data for OEM usersSystem variables274 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 2: d: Cutting edge number / D number 1 - 32000 unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection level...

  • Page 275

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1275List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_DPC6 [32000,32000]-reference:description: The type can be specified by machine data. DOUBLE is the default setting$TC_DPC6[t,d]When the 'flat D number management' f...

  • Page 276

    List of system variables1.9 Cutting edge data for OEM usersSystem variables276 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:V...

  • Page 277

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1277List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_DPCS1 [32000,32000]-reference:description: The type can be specified by machine data. DOUBLE is the default setting$TC_DPCS1[t,d]When the 'flat D number management'...

  • Page 278

    List of system variables1.9 Cutting edge data for OEM usersSystem variables278 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:V...

  • Page 279

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1279List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_DPCS6 [32000,32000]-reference:description: The type can be specified by machine data. DOUBLE is the default setting$TC_DPCS6[t,d]When the 'flat D number management'...

  • Page 280

    List of system variables1.9 Cutting edge data for OEM usersSystem variables280 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:V...

  • Page 281

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1281List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_SCP13 [32000,32000]-reference:description: Offset for $TC_DP3: $TC_SCP13[t,d] comparable to $TC_DP12[t,d]When the 'flat D number management' function is active, the...

  • Page 282

    List of system variables1.9 Cutting edge data for OEM usersSystem variables282 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNo...

  • Page 283

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1283List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_SCP18 [32000,32000]-reference:description: Offset for $TC_DP8: $TC_SCP18[t,d] comparable to $TC_DP17[t,d]When the 'flat D number management' function is active, the...

  • Page 284

    List of system variables1.9 Cutting edge data for OEM usersSystem variables284 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNo...

  • Page 285

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1285List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_SCP24 [32000,32000]-reference:description: Offset for $TC_DP4: $TC_SCP24[t,d] comparable to $TC_DP13[t,d]When the 'flat D number management' function is active, the...

  • Page 286

    List of system variables1.9 Cutting edge data for OEM usersSystem variables286 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_SCP27 [32000,32000]-reference:description: Offset for $TC_DP7: $...

  • Page 287

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1287List of system variables1.9 Cutting edge data for OEM usersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot...

  • Page 288

    List of system variables1.9 Cutting edge data for OEM usersSystem variables288 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: t: T number 1 - 32000 Index 2: d: Cutting edge number / D number 1 - 32000 unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard ...

  • Page 289

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1289List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_SCP36 [32000,32000]-reference:description: Offset for $TC_DP6: $TC_SCP36[t,d] comparable to $TC_DP15[t,d]When the 'flat D number management' function is active, the...

  • Page 290

    List of system variables1.9 Cutting edge data for OEM usersSystem variables290 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_SCP39 [32000,32000]-reference:description: Offset for $TC_DP9: $TC_SCP39[t,d...

  • Page 291

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1291List of system variables1.9 Cutting edge data for OEM usersmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation...

  • Page 292

    List of system variables1.9 Cutting edge data for OEM usersSystem variables292 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_SCP45 [32000,32000]-reference:description: Offset for $TC_DP5: $TC_SCP45[t,d] comparable to $TC_DP14[t,d]When the 'flat D number management' function is active, th...

  • Page 293

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1293List of system variables1.9 Cutting edge data for OEM userswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_SCP48 [32000,32000]-reference:description: Offset for $TC_DP8: $T...

  • Page 294

    List of system variables1.9 Cutting edge data for OEM usersSystem variables294 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:V...

  • Page 295

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1295List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_SCP54 [32000,32000]-reference:description: Offset for $TC_DP4: $TC_SCP54[t,d] comparable to $TC_DP13[t,d]When the 'flat D number management' function is active, the...

  • Page 296

    List of system variables1.9 Cutting edge data for OEM usersSystem variables296 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_SCP57 [32000,32000]-reference:description: Offset for $TC_DP7: $...

  • Page 297

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1297List of system variables1.9 Cutting edge data for OEM usersunit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:V...

  • Page 298

    List of system variables1.9 Cutting edge data for OEM usersSystem variables298 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_SCP63 [32000,32000]-reference:description: Offset for $TC_DP3: $TC_SCP63[t,d] comparable to $TC_DP12[t,d]When the 'flat D number management' function is active, th...

  • Page 299

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1299List of system variables1.9 Cutting edge data for OEM usersread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_SCP66 [32000,32000]-reference:description: Offset for ...

  • Page 300

    List of system variables1.9 Cutting edge data for OEM usersSystem variables300 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 2: d: Cutting edge number / D number 1 - 32000 unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection leve...

  • Page 301

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1301List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_SCP71 [32000,32000]-reference:description: Offset for $TC_DP11: $TC_SCP71[t,d] comparable to $TC_DP20[t,d]When the 'flat D number management' function is active, th...

  • Page 302

    List of system variables1.9 Cutting edge data for OEM usersSystem variables302 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP15 [32000,32000]-reference:description: Offset for $TC_DP5: $...

  • Page 303

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1303List of system variables1.9 Cutting edge data for OEM usersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot...

  • Page 304

    List of system variables1.9 Cutting edge data for OEM usersSystem variables304 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 2: d: Cutting edge number / D number 1 - 32000 unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection level...

  • Page 305

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1305List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_ECP24 [32000,32000]-reference:description: Offset for $TC_DP4: $TC_ECP24[t,d] comparable to $TC_DP13[t,d]When the 'flat D number management' function is active, the...

  • Page 306

    List of system variables1.9 Cutting edge data for OEM usersSystem variables306 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP27 [32000,32000]-reference:description: Offset for...

  • Page 307

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1307List of system variables1.9 Cutting edge data for OEM usersIndex 2: d: Cutting edge number / D number 1 - 32000 unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection level...

  • Page 308

    List of system variables1.9 Cutting edge data for OEM usersSystem variables308 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_ECP33 [32000,32000]-reference:description: Offset for $TC_DP3: $TC_ECP33[t,d] comparable to $TC_DP12[t,d]When the 'flat D number management' function is active, th...

  • Page 309

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1309List of system variables1.9 Cutting edge data for OEM userswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP36 [32000,32000]-reference:description: Offset for $TC_DP6: $T...

  • Page 310

    List of system variables1.9 Cutting edge data for OEM usersSystem variables310 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:...

  • Page 311

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1311List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_ECP41 [32000,32000]-reference:description: Offset for $TC_DP11: $TC_ECP41[t,d] comparable to $TC_DP20[t,d]When the 'flat D number management' function is active, th...

  • Page 312

    List of system variables1.9 Cutting edge data for OEM usersSystem variables312 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP45 [32000,32000]-reference:description: Offset for $TC_DP5: $...

  • Page 313

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1313List of system variables1.9 Cutting edge data for OEM usersmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation...

  • Page 314

    List of system variables1.9 Cutting edge data for OEM usersSystem variables314 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_ECP50 [32000,32000]-reference:description: Offset for $TC_DP10: $TC_ECP50[t,d] comparable to $TC_DP19[t,d]When the 'flat D number management' function is active, t...

  • Page 315

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1315List of system variables1.9 Cutting edge data for OEM userswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP54 [32000,32000]-reference:description: Offset for $TC_DP4: $T...

  • Page 316

    List of system variables1.9 Cutting edge data for OEM usersSystem variables316 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:...

  • Page 317

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1317List of system variables1.9 Cutting edge data for OEM usersDOUBLE$TC_ECP59 [32000,32000]-reference:description: Offset for $TC_DP9: $TC_ECP59[t,d] comparable to $TC_DP18[t,d]When the 'flat D number management' function is active, the...

  • Page 318

    List of system variables1.9 Cutting edge data for OEM usersSystem variables318 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP63 [32000,32000]-reference:description: Offset for...

  • Page 319

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1319List of system variables1.9 Cutting edge data for OEM usersIndex 2: d: Cutting edge number / D number 1 - 32000 unit: mmmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection level...

  • Page 320

    List of system variables1.9 Cutting edge data for OEM usersSystem variables320 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_ECP68 [32000,32000]-reference:description: Offset for $TC_DP8: $TC_ECP68[t,d] comparable to $TC_DP17[t,d]When the 'flat D number management' function is active, th...

  • Page 321

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1321List of system variables1.10 Tool management monitoring data1.10Tool management monitoring dataread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ECP71 [32000,32000...

  • Page 322

    List of system variables1.10 Tool management monitoring dataSystem variables322 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$TC_MOP2 [32000,32000]-reference:description: $TC_MOP2[t,d]Residual tool lifeIndex 1: t: T number 1 - 32000 Index 2: d: Cutting edge number / D nu...

  • Page 323

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1323List of system variables1.10 Tool management monitoring datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_MOP5 [32000,32000]-reference:description: $TC_MOP5[t,d]Prewarnin...

  • Page 324

    List of system variables1.10 Tool management monitoring dataSystem variables324 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchN...

  • Page 325

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1325List of system variables1.11 OEM user monitoring data1.11OEM user monitoring dataINT$TC_MOPC1 [32000,32000]-reference:description: The type can be specified by machine data. INT is the default setting$TC_MOPC1[t,d]Index 1: t: ...

  • Page 326

    List of system variables1.11 OEM user monitoring dataSystem variables326 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MOPC4 [32000,32000]-reference:description: The type can be specified by m...

  • Page 327

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1327List of system variables1.11 OEM user monitoring dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot class...

  • Page 328

    List of system variables1.11 OEM user monitoring dataSystem variables328 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Val...

  • Page 329

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1329List of system variables1.11 OEM user monitoring dataIndex 1: t: T number 1 - 32000 Index 2: d: Cutting edge number / D number 1 - 32000 unit: -min.:-2147483648max.:2147483647std:0Properties with regard to r...

  • Page 330

    List of system variables1.11 OEM user monitoring dataSystem variables330 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$TC_MOPCS5 [32000,32000]-reference:description: The type can be specified by machine data. INT is the default setting$TC_MOPCS5[t,d]Index 1: t: T number 1 - 32000 ...

  • Page 331

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1331List of system variables1.11 OEM user monitoring datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MOPCS8 [32000,32000]-reference:description: The type can be specified by m...

  • Page 332

    List of system variables1.12 Tool-related dataSystem variables332 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.12Tool-related dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock ...

  • Page 333

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1333List of system variables1.12 Tool-related dataINT$TC_TP3 [32000]-reference:description: $TC_TP3[t]Size on leftIndex 1: t: T number 1 - 32000 unit: -min.:-2147483648max.:2147483647std:1Properties with regard to reading/wr...

  • Page 334

    List of system variables1.12 Tool-related dataSystem variables334 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$TC_TP6 [32000]-reference:description: $TC_TP6[t]Size at bottomIndex 1: t: T number 1 - 32000 unit: -min.:-2147483648max.:2147483647std:1Properties with regard to reading...

  • Page 335

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1335List of system variables1.12 Tool-related dataINT$TC_TP9 [32000]-reference:description: $TC_TP9[t]Type of tool monitoringIndex 1: t: T number 1 - 32000 unit: -min.:-2147483648max.:2147483647std:0Properties with regard to...

  • Page 336

    List of system variables1.12 Tool-related dataSystem variables336 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1STRING$TC_TP_PROTA [32000]Name for the protection zonereference:description: $TC_TP_PROTA[t]Name of the 3-dimensional protection area for the tool, or the name of the file containing the...

  • Page 337

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1337List of system variables1.12 Tool-related datawrite:X-4X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPC1 [32000]-reference:description: The type can be specified by machine data....

  • Page 338

    List of system variables1.12 Tool-related dataSystem variables338 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPC4 [32000]-reference:description: The type can be specified by machine data...

  • Page 339

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1339List of system variables1.12 Tool-related datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPC7 [32000]-reference:description: The type can be specified by machine data....

  • Page 340

    List of system variables1.12 Tool-related dataSystem variables340 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPC10 [32000]-reference:description: The type can be specified by machine dat...

  • Page 341

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1341List of system variables1.12 Tool-related datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPCS3 [32000]-reference:description: The type can be specified by machine data...

  • Page 342

    List of system variables1.12 Tool-related dataSystem variables342 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPCS6 [32000]-reference:description: The type can be specified by machine dat...

  • Page 343

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1343List of system variables1.13 Tool-related grinding data1.13Tool-related grinding datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_TPCS9 [32000]-reference:description: Th...

  • Page 344

    List of system variables1.13 Tool-related grinding dataSystem variables344 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot cl...

  • Page 345

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1345List of system variables1.13 Tool-related grinding dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot cla...

  • Page 346

    List of system variables1.13 Tool-related grinding dataSystem variables346 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot cl...

  • Page 347

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1347List of system variables1.14 Magazine location data1.14Magazine location dataBOOL$TC_MPP3 [32000,32000]-reference:description: $TC_MPP3[n,m]Consider adjacent location On/OffIndex 1: n: Physical magazine number Index 2: ...

  • Page 348

    List of system variables1.14 Magazine location dataSystem variables348 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MPP6 [32000,32000]-reference:description: $TC_MPP6[n,m]T no. of tool in thi...

  • Page 349

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1349List of system variables1.14 Magazine location dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classif...

  • Page 350

    List of system variables1.15 Magazine location data for OEM usersSystem variables350 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.15Magazine location data for OEM usersINT$TC_MPP_SP [32000,32000]Spindle number assigned to the tool holderreference:description: $TC_MPP_SP[n,m]Only of significance...

  • Page 351

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1351List of system variables1.15 Magazine location data for OEM usersINT$TC_MPPC2 [32000,32000]-reference:description: The type can be specified by machine data. INT is the default setting$TC_MPPC2[n,m]Index 1: n: Physical magazin...

  • Page 352

    List of system variables1.15 Magazine location data for OEM usersSystem variables352 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MPPC5 [32000,32000]-reference:description: The type can be sp...

  • Page 353

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1353List of system variables1.15 Magazine location data for OEM usersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock sea...

  • Page 354

    List of system variables1.15 Magazine location data for OEM usersSystem variables354 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis id...

  • Page 355

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1355List of system variables1.15 Magazine location data for OEM usersINT$TC_MPPCS3 [32000,32000]-reference:description: The type can be specified by machine data. INT is the default setting$TC_MPPCS3[n,m]Index 1: n: Physical magaz...

  • Page 356

    List of system variables1.15 Magazine location data for OEM usersSystem variables356 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MPPCS6 [32000,32000]-reference:description: The type can be s...

  • Page 357

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1357List of system variables1.15 Magazine location data for OEM usersProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock sea...

  • Page 358

    List of system variables1.15 Magazine location data for OEM usersSystem variables358 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: n: Physical magazine number Index 2: m: Physical location number unit: -min.:-2147483648max.:2147483647std:0Properties with regard t...

  • Page 359

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1359List of system variables1.16 Magazine description data for tool management1.16Magazine description data for tool managementunit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection leve...

  • Page 360

    List of system variables1.16 Magazine description data for tool managementSystem variables360 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$TC_MAP1 [32000]-reference:description: $TC_MAP1[n]Type of magazineIndex 1: n: Magazine number 1 - .. unit: -min.:-2147483648max.:2147483647st...

  • Page 361

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1361List of system variables1.16 Magazine description data for tool managementINT$TC_MAP5 [32000]-reference:description: $TC_MAP5[n]Chaining to previous magazineIndex 1: n: Magazine number 1 - .. unit: -min.:-2147483648max.:...

  • Page 362

    List of system variables1.16 Magazine description data for tool managementSystem variables362 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$TC_MAP8 [32000]-reference:description: $TC_MAP8[n]Current magazine position in relation to tool change positionIndex 1: n: Magazine number 1 - .. ...

  • Page 363

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1363List of system variables1.17 Magazine description data for OEM user tool management1.17Magazine description data for OEM user tool managementwrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restr...

  • Page 364

    List of system variables1.17 Magazine description data for OEM user tool managementSystem variables364 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channe...

  • Page 365

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1365List of system variables1.17 Magazine description data for OEM user tool managementread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MAPC7 [32000]-reference:descripti...

  • Page 366

    List of system variables1.17 Magazine description data for OEM user tool managementSystem variables366 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MAPC10 [32000]-reference:description: The t...

  • Page 367

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1367List of system variables1.17 Magazine description data for OEM user tool managementwrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MAPCS3 [32000]-reference:description: The ty...

  • Page 368

    List of system variables1.17 Magazine description data for OEM user tool managementSystem variables368 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MAPCS6 [32000]-reference:description: The t...

  • Page 369

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1369List of system variables1.17 Magazine description data for OEM user tool managementwrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MAPCS9 [32000]-reference:description: The ty...

  • Page 370

    List of system variables1.18 Magazine block parametersSystem variables370 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.18Magazine block parametersSTRING$TC_MAMP1 [-1]-reference:description: $TC_MAMP1 Identifier of magazine blockIndex 1: Scalable variable Index 3: Max. string...

  • Page 371

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1371List of system variables1.19 Adapter data1.19Adapter dataINT$TC_ADPTT [32000]-reference:description: $TC_ADPTT[a]Adapter transformation numberIndex 1: a: Adapter number 1 - 32000 unit: -min.:-2147483648max.:2147483647std...

  • Page 372

    List of system variables1.20 MultiTool dataSystem variables372 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.20MultiTool dataDOUBLE$TC_ADPT3 [32000]-reference:description: $TC_ADPT3[a]Adapter geometry: Length 3Index 1: a: Adapter number 1 - 32000 unit: mmmin.:-1,8E308max.:1,8E308std...

  • Page 373

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1373List of system variables1.20 MultiTool dataread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTP3 [32000]-reference:description: $TC_MTP3[n]Size to the leftIndex 1: ...

  • Page 374

    List of system variables1.20 MultiTool dataSystem variables374 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTP6 [32000]-reference:description: $TC_MTP6[n]Downward sizeIndex 1: n: Mult...

  • Page 375

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1375List of system variables1.20 MultiTool datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTP_POS [32000]-reference:description: $TC_MTP_POS[n]PositionIndex 1: n: Mult...

  • Page 376

    List of system variables1.20 MultiTool dataSystem variables376 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPC1 [32000]-reference:description: The type can be specified by the ma...

  • Page 377

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1377List of system variables1.20 MultiTool datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPC4 [32000]-reference:description: The type can be specified by the machine data. ...

  • Page 378

    List of system variables1.20 MultiTool dataSystem variables378 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPC7 [32000]-reference:description: The type can be specified by the machine data....

  • Page 379

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1379List of system variables1.20 MultiTool datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPC10 [32000]-reference:description: The type can be specified by the machine data....

  • Page 380

    List of system variables1.20 MultiTool dataSystem variables380 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPCS3 [32000]-reference:description: The type can be specified by the machine data...

  • Page 381

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1381List of system variables1.20 MultiTool datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPCS6 [32000]-reference:description: The type can be specified by the machine data....

  • Page 382

    List of system variables1.20 MultiTool dataSystem variables382 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPCS9 [32000]-reference:description: The type can be specified by the machine data...

  • Page 383

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1383List of system variables1.20 MultiTool datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPP4 [32000,32]-reference:description: $TC_MTPP4[n,m]Multitool location stateIndex ...

  • Page 384

    List of system variables1.20 MultiTool dataSystem variables384 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlink...

  • Page 385

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1385List of system variables1.20 MultiTool dataunit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:chan...

  • Page 386

    List of system variables1.20 MultiTool dataSystem variables386 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$TC_MTPPC4 [32000,32]-reference:description: The type can be specified by the machine data. Default setting is INT$TC_MTPPC4[n,m]Index 1: n: Multitool number Index 2: ...

  • Page 387

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1387List of system variables1.20 MultiTool datawrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$TC_MTPPC7 [32000,32]-reference:description: The type can be specified by the machine da...

  • Page 388

    List of system variables1.20 MultiTool dataSystem variables388 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlink...

  • Page 389

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1389List of system variables1.20 MultiTool dataunit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:chan...

  • Page 390

    List of system variables1.20 MultiTool dataSystem variables390 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: n: Multitool number Index 2: m: Multitool location number unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA p...

  • Page 391

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1391List of system variables1.20 MultiTool dataINT$TC_MTPPCS8 [32000,32]-reference:description: The type can be specified by the machine data. Default setting is INT$TC_MTPPCS8[n,m]Index 1: n: Multitool number Index 2: ...

  • Page 392

    List of system variables1.21 Measuring system compensation valuesSystem variables392 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.21Measuring system compensation valueswrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$AA_ENC_COMP [n,m]EEC ...

  • Page 393

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1393List of system variables1.21 Measuring system compensation valuesDOUBLE$AA_ENC_COMP_MIN [n,31]EEC table: Starting positionreference:description: $AA_ENC_COMP_MIN[n,a]Start position of compensationa: Machine axesIndex 1: n: Enc...

  • Page 394

    List of system variables1.22 Quadrant error compensationSystem variables394 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.22Quadrant error compensationProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:MACHValuatio...

  • Page 395

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1395List of system variables1.22 Quadrant error compensationINT$AA_QEC_FINE_STEPS [n,31]QEC fine quantizingreference:description: $AA_QEC_FINE_STEPS[n,a]Fine quantization of characteristica: Machine axesIndex 1: n: 0 Index 2...

  • Page 396

    List of system variables1.22 Quadrant error compensationSystem variables396 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:MACHValuation:channel-specificblock searchN...

  • Page 397

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1397List of system variables1.22 Quadrant error compensationDOUBLE$AA_QEC_MEAS_TIME_2 [n,31]QEC measuring time range 2reference:description: $AA_QEC_MEAS_TIME_2[n,a]Measuring time for range $AA_QEC_ACCEL_2a: Machine axesIndex 1: n...

  • Page 398

    List of system variables1.22 Quadrant error compensationSystem variables398 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:MACHValuation:channel-specificblock searchN...

  • Page 399

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1399List of system variables1.23 Interpolatory compensation1.23Interpolatory compensationBOOL$AA_QEC_DIRECTIONAL [n,31]QEC direction-dependencereference:description: $AA_QEC_DIRECTIONAL[n,a]TRUE: Direction-dependent compensationFALSE: No...

  • Page 400

    List of system variables1.23 Interpolatory compensationSystem variables400 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuatio...

  • Page 401

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1401List of system variables1.23 Interpolatory compensationProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot cla...

  • Page 402

    List of system variables1.23 Interpolatory compensationSystem variables402 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$AN_CEC_DIRE...

  • Page 403

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1403List of system variables1.24 NCK-specific protection areas1.24NCK-specific protection areasBOOL$AN_CEC_IS_MODULO [n]CEC table: Modulo functionalityreference:description: $AN_CEC_IS_MODULO[n]TRUE: Cyclical repetition of compensation t...

  • Page 404

    List of system variables1.24 NCK-specific protection areasSystem variables404 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1CHAR$SN_PA_T_W [n]Protection zone specific to workpiece/toolreference:description: $SN_PA_T_W[n]Protection zone specific to workpiece/tool0: Workpiece-specific protection zon...

  • Page 405

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1405List of system variables1.24 NCK-specific protection areasINT$SN_PA_LIM_3DIM [n]Scope of application-limiting protection zone reference:description: $SN_PA_LIM_3DIM[n]Identifier for limitation of protection zone in the axisperpendicu...

  • Page 406

    List of system variables1.24 NCK-specific protection areasSystem variables406 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$SN_PA_MINUS_LIM [n]Limitation of protection zone applicate minus reference:description: $SN_PA_MINUS_LIM[n]Negative limitation of protection zone in minus direction in...

  • Page 407

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1407List of system variables1.24 NCK-specific protection areasINT$SN_PA_CONT_TYP [n,m]Type of the contour elementreference:description: $SN_PA_CONT_TYP[n,m]Type (G1, G2, G3) of contour element=0: Contour not defined=1: Straight=2: Circle...

  • Page 408

    List of system variables1.24 NCK-specific protection areasSystem variables408 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$SN_PA_CONT_ABS [n,m]End point of contour element (abscissa)reference...

  • Page 409

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1409List of system variables1.25 Cycle parameterization1.25Cycle parameterizationDOUBLE$SN_PA_CENT_ABS [n,m]Center point of contour element (abscissa)reference:description: $SN_PA_CENT_ABS[n,m]Center point of contour element (abscissa)Re...

  • Page 410

    List of system variables1.25 Cycle parameterizationSystem variables410 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classi...

  • Page 411

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1411List of system variables1.25 Cycle parameterizationwrite:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$C_F ISO cycle parameter for address Freference:description: $C_FValue of pro...

  • Page 412

    List of system variables1.25 Cycle parameterizationSystem variables412 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$C_I [10]ISO cycle parameter for address Ireference:description: $C_I[]Value of programmed address I in ISO2/3 mode for cycle parameterization and macro programming with G65/G...

  • Page 413

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1413List of system variables1.25 Cycle parameterizationaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$C_L ISO cycle parameter for address Lreference:description: $C_LValue of programmed addr...

  • Page 414

    List of system variables1.25 Cycle parameterizationSystem variables414 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$C_O ISO cycle parameter for address Oreference:description: $C_OValue of programmed address O in ISO2/3 mode for cycle parameterizationunit: -min.:-1,8E308max.:1,8E308std:0.0...

  • Page 415

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1415List of system variables1.25 Cycle parameterizationDOUBLE$C_R ISO cycle parameter for address Rreference:description: $C_RValue of programmed address R in ISO2/3 mode for cycle parameterizationunit: -min.:-1,8E308max.:1,8E308std:0.0P...

  • Page 416

    List of system variables1.25 Cycle parameterizationSystem variables416 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$C_U ISO cycle parameter for address Ureference:description: $C_UValue of programmed address U in ISO2/3 mode for cycle parameterizationunit: -min.:-1,8E308max.:1,8E308std:0.0...

  • Page 417

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1417List of system variables1.25 Cycle parameterizationDOUBLE$C_X ISO cycle parameter for address Xreference:description: $C_XValue of programmed address X in ISO2/3 mode for cycle parameterizationunit: -min.:-1,8E308max.:1,8E308std:0.0P...

  • Page 418

    List of system variables1.25 Cycle parameterizationSystem variables418 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$C_DL ISO parameter for address DLreference:description: Value of programmed address DL (additive tool offset) in the case of a subprogram call by M/T function substitutionuni...

  • Page 419

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1419List of system variables1.25 Cycle parameterizationINT$C_A_PROG ISO cycle parameter for address Areference:description: $C_A_PROGAddress A is programmed in a block with cycle call0 = Not programmed1 = Programmed3 = Programmed increme...

  • Page 420

    List of system variables1.25 Cycle parameterizationSystem variables420 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA13 = Programmed incrementallyBit 0 is set if the address is programmed absolutely or incrementally.Bit 1 is set in addition if the address is programmed incrementally.unit: -min.:-21...

  • Page 421

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1421List of system variables1.25 Cycle parameterizationread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$C_F_PROG ISO cycle parameter for address Freference:description: $C_...

  • Page 422

    List of system variables1.25 Cycle parameterizationSystem variables422 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$C_H_PROG ISO cycle parameter for address Hreference:description: $C_H_PROGAddress H is programmed in a block with cycle call0 = Not programmed1 = Programmed3 = Programmed increm...

  • Page 423

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1423List of system variables1.25 Cycle parameterization3 = Programmed incrementallyBit 0 is set if the address is programmed absolutely or incrementally.Bit 1 is set in addition if the address is programmed incrementally.unit: -min.:-214...

  • Page 424

    List of system variables1.25 Cycle parameterizationSystem variables424 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$C_M_PROG ISO cycle parameter for address Mreference:description: $C...

  • Page 425

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1425List of system variables1.25 Cycle parameterizationINT$C_O_PROG ISO cycle parameter for address Oreference:description: $C_O_PROGAddress O is programmed in a block with cycle call0 = Not programmed1 = Programmed3 = Programmed increme...

  • Page 426

    List of system variables1.25 Cycle parameterizationSystem variables426 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA13 = Programmed incrementallyBit 0 is set if the address is programmed absolutely or incrementally.Bit 1 is set in addition if the address is programmed incrementally.unit: -min.:-21...

  • Page 427

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1427List of system variables1.25 Cycle parameterizationread:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$C_T_PROG ISO cycle parameter for address Treference:description: $C_...

  • Page 428

    List of system variables1.25 Cycle parameterizationSystem variables428 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$C_V_PROG ISO cycle parameter for address Vreference:description: $C_V_PROGAddress V is programmed in a block with cycle call0 = Not programmed1 = Programmed3 = Programmed increm...

  • Page 429

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1429List of system variables1.25 Cycle parameterization3 = Programmed incrementallyBit 0 is set if the address is programmed absolutely or incrementally.Bit 1 is set in addition if the address is programmed incrementally.unit: -min.:-214...

  • Page 430

    List of system variables1.25 Cycle parameterizationSystem variables430 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7-0-write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$C_PI_PROG ISO cycle parameter for address Preference:description: 0...

  • Page 431

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1431List of system variables1.25 Cycle parameterizationwrite:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$C_TS_PROG Parameter for T function replacementreference:description: Query whet...

  • Page 432

    List of system variables1.25 Cycle parameterizationSystem variables432 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1dBit = 1 -> Address incrementally programmedBit = 0 -> Address absolutely programmedunit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP...

  • Page 433

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1433List of system variables1.25 Cycle parameterizationINT$C_J_NUM Number of "J" addresses programmed in blockreference:description: $C_J_NUMThe number of "J" addresses programmed in the block is stored in $C_J_NUM.Th...

  • Page 434

    List of system variables1.25 Cycle parameterizationSystem variables434 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:X-7-0-axis identifier:Valua...

  • Page 435

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1435List of system variables1.25 Cycle parameterizationINT$C_ME Address extension for subprogram calls via M functionreference:description: $C_MEAddress extension for address M for subprogram call per M functionunit: -min.:-2147483648max...

  • Page 436

    List of system variables1.25 Cycle parameterizationSystem variables436 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$C_AUX_VALUE [1]Parameter for auxiliary function replacement. reference:description: Parameter for auxiliary function replacement. It contains the value of the auxiliary funct...

  • Page 437

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1437List of system variables1.25 Cycle parameterizationwrite:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$C_T_VALUE Cycle parameter for address Treference:description: $C_T_VALUEValu...

  • Page 438

    List of system variables1.25 Cycle parameterizationSystem variables438 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:X-7-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$C_DUPLO Parameter for replacing the TCA commandreference:description: Returns ...

  • Page 439

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1439List of system variables1.26 System data1.26System dataINT$C_ISOPRINT Status ISOOPEN, ISOPRINT, ISOCLOSEreference:description: $C_ISOPRINTStatus variable for ISOOPEN, ISOPRINT, ISOCLOSE.unit: -min.:-2147483648max.:2147483647std:0Prop...

  • Page 440

    List of system variables1.26 System dataSystem variables440 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:runin stpX7X7Xwrite:runin stpX7X7Xaxis identifier:Valuation:channel-specificblock searchCurrent valuelinkNo restrictionsDOUBLE$AN_NCK_VERSION NCK versionreference:description: NCK version...

  • Page 441

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1441List of system variables1.26 System dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot ...

  • Page 442

    List of system variables1.26 System dataSystem variables442 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AN_SYNC_ACT_LOAD Current runtime for synchronized actionsreference:description: $AN_SYN...

  • Page 443

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1443List of system variables1.26 System dataDOUBLE$AN_SERVO_ACT_LOAD Current runtime of position controllerreference:description: $AN_SERVO_ACT_LOAD supplies the current runtime of the position controller.unit: -min.:-1,8E308max.:1,8E308...

  • Page 444

    List of system variables1.26 System dataSystem variables444 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AN_REBOOT_DELAY_TIME Time until rebootreference:description: A value higher than zero indicates that the NCK has received the "NCK Reset" signal from the HMI and displays the ...

  • Page 445

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1445List of system variables1.26 System dataINT$A_PROBE [2]Probe statusreference:description: $A_PROBE[1]: Status of first probe$A_PROBE[2]: Status of second probe0 => not deflected1 => deflectedIndex 1: n: Number of the pro...

  • Page 446

    List of system variables1.26 System dataSystem variables446 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index2 values = 6 to 14 only defined for index1 = 2 = active file system20 Number of all asynchronous write operations21 Number of failed asynchronous write operations (system deficiency)22 Su...

  • Page 447

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1447List of system variables1.26 System dataunit: smin.:0max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX2X2Xaxis identifier:Valuation:channel-specificbl...

  • Page 448

    List of system variables1.26 System dataSystem variables448 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_DPB_IN [16,128]PROFIBUS/PROFINET input byte (unsigned)reference:description: The field variable $A_DPB_IN[n,m] is used to read a data byte (8 bits) from PROFIBUS/PROFINET IO.n:= Index fo...

  • Page 449

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1449List of system variables1.26 System data 1: Data area could not be activated yet 2: Data area is available 3: Data area is currently not availableWhether an input data area is available can be queried with the variable $A_DP_IN_VA...

  • Page 450

    List of system variables1.26 System dataSystem variables450 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:Cross-channelblock searchNot classifiedli...

  • Page 451

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1451List of system variables1.26 System dataunit: -min.:0max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:Cross-cha...

  • Page 452

    List of system variables1.26 System dataSystem variables452 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1axis identifier:Valuation:Cross-channelblock searchNot classifiedlinkNot classifiedDOUBLE$A_DPR_OUT [16,128]PROFIBUS/PROFINET output data (4 bytes) reference:description: The field variable $A...

  • Page 453

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1453List of system variables1.26 System dataINT$A_DPW_OUT [16,128]PROFIBUS/PROFINET output word (unsigned)reference:description: The field variable $A_DPW_OUT[n,m] is used to write a data word (16 bits) to PROFIBUS/PROFINET IO.n:= Index ...

  • Page 454

    List of system variables1.26 System dataSystem variables454 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_DPSW_IN [16,128]PROFIBUS/PROFINET input word (signed) reference:description: The field variable $A_DPSW_IN[n,m] is used to read a data word (16 bits) from PROFIBUS/PROFINET IO.n:= Index ...

  • Page 455

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1455List of system variables1.26 System dataINT$A_DPSB_OUT [16,128]PROFIBUS/PROFINET output byte (signed) reference:description: The field variable $A_DPSB_IN[n,m] is used to write a data byte (8 bits) to PROFIBUS/PROFINET IO.n:= Index f...

  • Page 456

    List of system variables1.26 System dataSystem variables456 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_DPSD_OUT [16,128]PROFIBUS/PROFINET output data double word (signed)reference:description: The field variable $A_DPSD_OUT[n,m] is used to write a data double word (32 bits) to PROFIBUS/PR...

  • Page 457

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1457List of system variables1.26 System dataDOUBLE$AN_COLL_MEM_USE_MIN Minimum memory requirement for collision monitoringreference:description: Collision calculation requires internal memory. The amount required is either calculated aut...

  • Page 458

    List of system variables1.26 System dataSystem variables458 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AN_COLL_MEM_USE_ACT Current memory requirement for collision monitoringreference:description: Collision calculation requires internal memory. The amount required is either calculated au...

  • Page 459

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1459List of system variables1.26 System dataProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7-write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classified...

  • Page 460

    List of system variables1.26 System dataSystem variables460 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7-write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot...

  • Page 461

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1461List of system variables1.26 System dataDOUBLE$AN_PREP_MAX_LOAD_GROSS Longest preprocessing runtimereference:description: $AN_PREP_MAX_LOAD_GROSS returns the longest gross preprocessing runtime across all channels.unit: -min.:-1,8E30...

  • Page 462

    List of system variables1.26 System dataSystem variables462 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AN_AUXFU_LIST_CHANNO [1679]Global list of auxiliary functions - channel numberreference:description: The array variable $AN_AUXFU_LIST_CHANNO[n] is used to read the channel number of the a...

  • Page 463

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1463List of system variables1.26 System dataIndex 1: Maximum axis number unit: -min.:0max.:0xffffffffstd:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite...

  • Page 464

    List of system variables1.26 System dataSystem variables464 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:0max.:0x7fffffffstd:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-...

  • Page 465

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1465List of system variables1.26 System dataINT$AN_IPO_CHANAX [n]Assignment of the global axis to the interpolator (channel, channel axis).reference:description: For a global axis number, such as the one reported by $VA_IPO_NC_CHANAX, th...

  • Page 466

    List of system variables1.26 System dataSystem variables466 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:runin stpX7X7Xaxis identifier:Valuation:channel-specificblock searchNot c...

  • Page 467

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1467List of system variables1.26 System dataIndex 1: Currently, the index can have a value between 1 and 16. unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIO...

  • Page 468

    List of system variables1.26 System dataSystem variables468 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AN_LINK_TRANS_RATE_LAST_SUM[16]Unused link variables in the stated transmission directionreference:description: Number of unused link variables in the previous interpolation cycle in the s...

  • Page 469

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1469List of system variables1.26 System dataread:runin stpX7X7Xwrite:runin stpX7X7Xaxis identifier:Valuation:channel-specificblock searchCurrent valuelinkNo restrictionsINT$AN_SIM_MAX_IPOSTEP Maximum simulation step in real-time interpol...

  • Page 470

    List of system variables1.26 System dataSystem variables470 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:--0-0-axis identifier:Valuation:Cross-channel...

  • Page 471

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1471List of system variables1.26 System datawrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsSTRING$NP_T_FILENAME [n]File name of a tool protection area element of the type "FILE&quo...

  • Page 472

    List of system variables1.26 System dataSystem variables472 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:--0-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo ...

  • Page 473

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1473List of system variables1.27 Axial system variables1.27Axial system variablesDOUBLE$P_EP [31]Programmed end positionreference:description: $P_EP[X]System variable $P_EP supplies the current WCS setpoint position in the interpreter. T...

  • Page 474

    List of system variables1.27 Axial system variablesSystem variables474 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: Maximum axis number unit: Linear / angular positionmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI p...

  • Page 475

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1475List of system variables1.27 Axial system variablesINT$P_POLF_VALID [31]Status of the value of $P_POLFreference:description: $P_POLF_VALID[X]Supplies the status of $P_POLF[X]X: AxisReturn values:0: No retraction programmed1: Retracti...

  • Page 476

    List of system variables1.27 Axial system variablesSystem variables476 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specifi...

  • Page 477

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1477List of system variables1.27 Axial system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specific...

  • Page 478

    List of system variables1.27 Axial system variablesSystem variables478 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AA_ACT_INDEX_AX_POS_NO [31]Current indexing positionreference:description: $AA_ACT_INDEX_AX_POS_NO[X]0: Not an indexing axis, no indexing position is thus available.> 0: Numb...

  • Page 479

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1479List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedBOOL$AA_ENC1_ACTIVE [31]1. Measuring system is activereference:descri...

  • Page 480

    List of system variables1.27 Axial system variablesSystem variables480 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$VA_IM1 [31]Current MCS actual value of an ...

  • Page 481

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1481List of system variables1.27 Axial system variablesunit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:-X0X7Xwrite:--0-0-axis identifier:CHANMACHVa...

  • Page 482

    List of system variables1.27 Axial system variablesSystem variables482 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: Linear / angular positionmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite...

  • Page 483

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1483List of system variables1.27 Axial system variablesDOUBLE$AA_MW4 [31]Probe position trigger 4 (WCS)reference:description: $AA_MW4[X]Measurement result axial measurementTrigger event 4 in WCSIndex 1: Maximum axis number u...

  • Page 484

    List of system variables1.27 Axial system variablesSystem variables484 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:runin stpX7X7Xaxis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_MM3 [31]Probe position trigger 3 (MCS)reference:de...

  • Page 485

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1485List of system variables1.27 Axial system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7-0Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specific...

  • Page 486

    List of system variables1.27 Axial system variablesSystem variables486 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:GEOCHANMACHSPINV...

  • Page 487

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1487List of system variables1.27 Axial system variableswrite:runin stpX7X7Xaxis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AA_MEAS_P3_VALID [31]Unlatch 3rd measuring point of an ax...

  • Page 488

    List of system variables1.27 Axial system variablesSystem variables488 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AA_MEAS_POINT1 [31]1. measuring pointreference:description: Variable for workpiece and tool measurement.Axial variable $AA_MEAS_POINT1[ax] is used to write the 1st measuring ...

  • Page 489

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1489List of system variables1.27 Axial system variablesDOUBLE$AA_MEAS_POINT3 [31]3. measuring pointreference:description: Variable for workpiece and tool measurement.Axial variable $AA_MEAS_POINT3[ax] is used to write the 3rd measuring p...

  • Page 490

    List of system variables1.27 Axial system variablesSystem variables490 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AA_MEAS_SP_VALID [31]Validity of position setpointreference:description: Variable for workpiece and tool measurement.Axial variable $AA_MEAS_SP_VALID[ax] is used to set the defi...

  • Page 491

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1491List of system variables1.27 Axial system variablesDOUBLE$AA_MEAS_SETANGLE [31]Angle setpoint of an axisreference:description: Variable for workpiece and tool measurement.Axial variable $AA_MEAS_SETANGLE[ax] is used to define an angl...

  • Page 492

    List of system variables1.27 Axial system variablesSystem variables492 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specifi...

  • Page 493

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1493List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_TOFF [31]Offset in tool directionreference:description: Var...

  • Page 494

    List of system variables1.27 Axial system variablesSystem variables494 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AA_TOFF_LIMIT [31]Limit value for offset in TCS reachedreference:description: Axial variable $AA_TOFF_LIMIT[ax] is used to interrogate a limit value for the offset inthe tool di...

  • Page 495

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1495List of system variables1.27 Axial system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specific...

  • Page 496

    List of system variables1.27 Axial system variablesSystem variables496 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:-X0X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock s...

  • Page 497

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1497List of system variables1.27 Axial system variablesmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:-X0X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINVa...

  • Page 498

    List of system variables1.27 Axial system variablesSystem variables498 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AA_OSCILL_REVERSE_POS2 [31]Reciprocation reversal position 2reference:description: $AA_OSCILL_REVERSE_POS2[X]Supplies current reversal position 2 for reciprocation.In synchro...

  • Page 499

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1499List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_OVR [31]Axial overridereference:description: $AA_OVR[<ax...

  • Page 500

    List of system variables1.27 Axial system variablesSystem variables500 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:-X0X7Xwrite:--0-0-axis identifier:CHANValuation:ch...

  • Page 501

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1501List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_VACTW [31]Axis velocity in the WCSreference:description: Ax...

  • Page 502

    List of system variables1.27 Axial system variablesSystem variables502 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_LOAD [31]Drive loadreference:description: $AA_LOAD[X]Drive...

  • Page 503

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1503List of system variables1.27 Axial system variablesDOUBLE$AA_TORQUE [31]Drive torque setpointreference:description: $AA_TORQUE[X]Drive torque setpoint in Nmor actual force in N (only for SIMODRIVE 611D HLA)Available only for SIMODRIV...

  • Page 504

    List of system variables1.27 Axial system variablesSystem variables504 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AA_POWER [31]Drive active powerreference:description: $AA_POWER[x]Drive active power in WAvailable only for SIMODRIVE 611D and PROFIdrive drives.On the PROFIdrive, the value ...

  • Page 505

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1505List of system variables1.27 Axial system variablesmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMA...

  • Page 506

    List of system variables1.27 Axial system variablesSystem variables506 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$VA_VALVELIFT [31]Hydraulic valve liftreference:description: $VA_VALVELIFT[X]Actual valve lift in mm (for SIMODRIVE611D hydraulic module only)Index 1: Maximum axis numb...

  • Page 507

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1507List of system variables1.27 Axial system variablesINT$VA_DP_ACT_TEL [20,31]PROFIBUS/PROFINET actual telegram from drive to NCreference:description: $VA_DP_ACT_TEL[b,a]b: Word index (16-bit access) in the PROFIBUS/PROFINET telegrama:...

  • Page 508

    List of system variables1.27 Axial system variablesSystem variables508 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AA_SNGLAX_STAT [31]Status of single axisreference:description: $AA_SNGLAX_STAT[X]Axis status:0: Axis is not a single axis1: Single axis in Reset2: Single axis has ended3: Single...

  • Page 509

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1509List of system variables1.27 Axial system variablesINT$AA_TYP [31]Axis typereference:description: $AA_TYP[<axis>]Axis type:0: Axis in another channel1: Program axis of own channel2: Neutral axis3: PLC axis4: Oscillating axis5: ...

  • Page 510

    List of system variables1.27 Axial system variablesSystem variables510 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_SEARCH_MASLC [31]Master-slave coupling status changedreference:description: $P_SEARCH_MASLC[axis identifier]The current status of a master-slave coupling has been changeddurin...

  • Page 511

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1511List of system variables1.27 Axial system variablesmin.:0max.:5std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:runin stpX7X7Xaxis identifier:GEOCHANMACHSPINV...

  • Page 512

    List of system variables1.27 Axial system variablesSystem variables512 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7-write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classif...

  • Page 513

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1513List of system variables1.27 Axial system variablesINT$VA_FOC [31]Actual status of "ForceControl"reference:description: $VA_FOC[X]Status actual state "ForceControl"0: ForceControl not active1: ForceControl active ...

  • Page 514

    List of system variables1.27 Axial system variablesSystem variables514 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AA_EG_SYNFA [31]Synchronization of the slave axisreference:description: $AA_EG_SYNFA[a]a: Following axisSynchronous position of following axisIndex 1: Maximum axis num...

  • Page 515

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1515List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$VA_EG_SYNCDIFF [31]Synchronism differencereference:description...

  • Page 516

    List of system variables1.27 Axial system variablesSystem variables516 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:max.:std:GEOAXISNUMProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINV...

  • Page 517

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1517List of system variables1.27 Axial system variablesDOUBLE$AA_LEAD_P_TURN [31]Modulo compensation of the lead valuereference:description: $AA_LEAD_P_TURN[LW]Current master value positional component lost as a result of modulo reductio...

  • Page 518

    List of system variables1.27 Axial system variablesSystem variables518 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_LEAD_V [31]Current lead value - velocityreference:descript...

  • Page 519

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1519List of system variables1.27 Axial system variablesmin.:0max.:1std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7-write:--0-0-axis identifier:GEOCHANMACHSPINValuation...

  • Page 520

    List of system variables1.27 Axial system variablesSystem variables520 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$VA_COUP_OFFS [31]Position offset on actual value sidereference:description: $VA_COUP_OFFS[S2]S2: spindle 2 or C: axis CPosition offset from synchronous spindle (following spi...

  • Page 521

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1521List of system variables1.27 Axial system variablesmin.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSP...

  • Page 522

    List of system variables1.27 Axial system variablesSystem variables522 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock s...

  • Page 523

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1523List of system variables1.27 Axial system variablesread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AA_VELOLIMA [31]Velocity correctionreference:d...

  • Page 524

    List of system variables1.27 Axial system variablesSystem variables524 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: Maximum axis number unit: -min.:1max.:6std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwr...

  • Page 525

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1525List of system variables1.27 Axial system variablesBOOL$AA_ESR_ENABLE [31]ESR enablereference:description: $AA_ESR_ENABLE[X] = 1Enabling of "Extended stop and retract"Index 1: Maximum axis number unit: -min.:FA...

  • Page 526

    List of system variables1.27 Axial system variablesSystem variables526 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AA_POLFA_VALID [31]Status of the value of $AA_POLFAreference:des...

  • Page 527

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1527List of system variables1.27 Axial system variablesBOOL$AN_AXCTSWA [31]Axis container rotationreference:description: Is axis container rotation active ?Example: EVERY $AN_AXCTSWA[n] == TRUE DO M99Read:TRUE: An axis container rotation...

  • Page 528

    List of system variables1.27 Axial system variablesSystem variables528 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$AC_AXCTSWA [31]Channel enable for axis container rotationreference:description: Enables axis container rotation in the channel.TRUE: The channel has axis container rotation ena...

  • Page 529

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1529List of system variables1.27 Axial system variablesBOOL$VA_SCE [31]Status of speed controller enablereference:description: $VA_SCE[X1]Status of speed controller enableFor SIMODRIVE 611D: The status is supplied directly from the drive...

  • Page 530

    List of system variables1.27 Axial system variablesSystem variables530 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchProgram sensitivelinkNot classifiedDOUBLE$AA_TRAVEL_COUNT [31]Number of traversing operationsreferen...

  • Page 531

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1531List of system variables1.27 Axial system variablesread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchProgram sensitivelinkNot classifiedDOUBLE$AA_TRAVEL_COUNT_HS [31]No. of traversing...

  • Page 532

    List of system variables1.27 Axial system variablesSystem variables532 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchProgram sensitivelinkNot classifiedDOUBLE$AA_JERK_COUNT [31]Number of traversing operations with jer...

  • Page 533

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1533List of system variables1.27 Axial system variablesDOUBLE$VA_SYNCDIFF [31]Synchronism deviation between actual valuesreference:description: $VA_SYNCDIFF[FA]FA: Following axis/following spindleDeviation in synchronism between actual v...

  • Page 534

    List of system variables1.27 Axial system variablesSystem variables534 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$VA_SYNCDIFF_STAT [31]Status of synchronism deviation between actual valuesreference:description: VA_SYNCDIFF_STAT[FA] FA: Following axis/following spindleStatus of synchronism ...

  • Page 535

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1535List of system variables1.27 Axial system variablesDOUBLE$AA_OSCILL_BREAK_POS1 [31]Reciprocation interruption position 1reference:description: $AA_OSCILL_BREAK_POS1[<axis>]The current approach to reversal position 1 is finished...

  • Page 536

    List of system variables1.27 Axial system variablesSystem variables536 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:G...

  • Page 537

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1537List of system variables1.27 Axial system variablesunit: Linear / angular positionmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:...

  • Page 538

    List of system variables1.27 Axial system variablesSystem variables538 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AA_TYPE [31]Axis typereference:description: $AA_TYPE[<axis>]Axis type:0: Type is not ascertainable1: NC-Program axis2: Neutral axis3: PLC axis4: Oscillating axis5: Neutral...

  • Page 539

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1539List of system variables1.27 Axial system variablesDOUBLE$AA_DTSB [31]Distance from start of motion in BCSreference:description: Axial variable $AA_DTSB[ax] determines the axial distance (with algebraic sign) from the start of motion...

  • Page 540

    List of system variables1.27 Axial system variablesSystem variables540 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$AA_AXCHANGE_TYP [31]axchange axistypereference:description: $AA_AXCHANGE_TYP[<axis>]Type of axis with regard to axis replacement0: Axis assigned to NC program1: Axis assig...

  • Page 541

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1541List of system variables1.27 Axial system variablesINT$AA_INPOS_STAT [31]State of the programmed positionreference:description: The variable $AA_INPOS_STAT[<axis>] returns the status of a programmed axis position. The indexing ...

  • Page 542

    List of system variables1.27 Axial system variablesSystem variables542 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$VA_ENC_ZERO_MON_ERR_CNT [n,31] Zero mark monitoring error counterreference:description: Incremental and distance-coded measuring systems:$VA_ENC_ZERO_MON_ERR_CNT[n,ax] contains ...

  • Page 543

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1543List of system variables1.27 Axial system variablesunit: -min.:0max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANM...

  • Page 544

    List of system variables1.27 Axial system variablesSystem variables544 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$P_DIAM_STAT [31]Status of the diameter programming in the preprocessingreference:description: The system variable $P_DIAM_STAT[AX] returns the programmed status of the diameter ...

  • Page 545

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1545List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$P_SCC_STAT [31]Status of the G96/G961/G962 assignment in the preproc...

  • Page 546

    List of system variables1.27 Axial system variablesSystem variables546 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: Axis/spindle identifier unit: -min.:0max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:run...

  • Page 547

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1547List of system variables1.27 Axial system variablesIndex 1: Axis/spindle identifier unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMrea...

  • Page 548

    List of system variables1.27 Axial system variablesSystem variables548 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: Axis/spindle identifier unit: Linear / angular accelerationmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection level...

  • Page 549

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1549List of system variables1.27 Axial system variablesSTRING$AA_CPFMON [31]Response of the following axis when the coupling is switched onreference:description: The system variable returns the response of the following axis/spindle when...

  • Page 550

    List of system variables1.27 Axial system variablesSystem variables550 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1STRING$AA_CPMRESET [31]Status of the coupling after resetreference:description: The system variable $AA_CPMRESET[AX1] returns the status of the coupling for the following axis/spind...

  • Page 551

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1551List of system variables1.27 Axial system variablesSTRING$AA_CPMSTARTPRT [31]Status of the coupling after SERUPRO start reference:description: The system variable $AA_CPMSTART[AX1] returns the status of the coupling for the following...

  • Page 552

    List of system variables1.27 Axial system variablesSystem variables552 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1STRING$AA_CPBC [31]Block change criterionreference:description: The system variable $AA_CPBC[AX1] returns the active block change criterion when the coupling of the following axis/s...

  • Page 553

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1553List of system variables1.27 Axial system variablesAXIS$AA_CPDEFLA [31,n]Specifies the nth defined leading axis/spindle reference:description: The channel identifier of the nth defined leading axis/spindle is returned for the axis/sp...

  • Page 554

    List of system variables1.27 Axial system variablesSystem variables554 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$PA_CPFACT [31]Coupling type of a following axis/spindlereference:de...

  • Page 555

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1555List of system variables1.27 Axial system variablesSTRING$PA_CPSETTYPE [31]Default coupling typereference:description: Returns the default coupling type for the axis/spindle AX1.$PA_CPSETTYPE[AX1] "NONE" "TRAIL" &...

  • Page 556

    List of system variables1.27 Axial system variablesSystem variables556 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$PA_CPNACTLA [31]Number of active leading axes/spindlesreference:...

  • Page 557

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1557List of system variables1.27 Axial system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock se...

  • Page 558

    List of system variables1.27 Axial system variablesSystem variables558 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1STRING$PA_CPMRESET [31]Status of the coupling after resetreference:description: The system variable $PA_CPMRESET[AX1] returns the status of the coupling for the following axis/spind...

  • Page 559

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1559List of system variables1.27 Axial system variablesSTRING$PA_CPBC [31]Block change criterionreference:description: The system variable $PA_CPBC[AX1] returns the active block change criterion when the coupling of the following axis/sp...

  • Page 560

    List of system variables1.27 Axial system variablesSystem variables560 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock s...

  • Page 561

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1561List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$AA_FIX_POINT_SELECTED [31]Selected fixed pointreference:description:...

  • Page 562

    List of system variables1.27 Axial system variablesSystem variables562 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$VA_ENC1_COMP_VAL [31]EEC compensation value encoder 1reference:description: The axial variable $VA_ENC1_COMP_VAL[ax] determines the current compensation value of the measurin...

  • Page 563

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1563List of system variables1.27 Axial system variablesDOUBLE$VA_TEMP_COMP_VAL [31]TEMP compensation valuereference:description: The axial variable $VA_TEMP_COMP_VAL[ax] determines the current compensation value of the temperature compen...

  • Page 564

    List of system variables1.27 Axial system variablesSystem variables564 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AA_DTBREB_CORR [31]Correction component of the total deceleration path in the BCSreference:description: $AA_DTBREB_CORR[ax]Correction component of the total deceleration path...

  • Page 565

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1565List of system variables1.27 Axial system variablesDOUBLE$AA_DTBREM_CMD [31]Command component of the total deceleration path in the Machinereference:description: $AA_DTBREM_CMD[ax]Command component of the total deceleration path of t...

  • Page 566

    List of system variables1.27 Axial system variablesSystem variables566 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHValuation:Cross-channelblock searchNot classifiedlinkNot classifiedINT$AA_BRAKE_CONDB [31]Context-sensitive conditions for interpolator stop i...

  • Page 567

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1567List of system variables1.27 Axial system variablesmin.:0max.:0x1std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:-X0X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:chann...

  • Page 568

    List of system variables1.27 Axial system variablesSystem variables568 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$AA_JOG_POS_SELECTED [31]JOG to positionreference:description: $AA_JOG_POS_SELECTED[<Axis>]FALSE: JOG to position inactive.TRUE: JOG to position active.Via the NC/PLC inte...

  • Page 569

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1569List of system variables1.27 Axial system variablesDOUBLE$AA_PCS_REL [31]Current relative WCS setpoint value of an axisreference:description: The axial variable $AA_PCS_REL[ax] determines the current relative setpoint value in the wo...

  • Page 570

    List of system variables1.27 Axial system variablesSystem variables570 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specifi...

  • Page 571

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1571List of system variables1.27 Axial system variablesDOUBLE$AA_EG_SYN [31,31]Synchronization of the master axisreference:description: $AA_EG_SYN[a,b]a: Following axisb: Leading axisSynchronous position of leading axis bIndex 1: ...

  • Page 572

    List of system variables1.27 Axial system variablesSystem variables572 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANM...

  • Page 573

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1573List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:Cross-channelblock searchNot classifiedlinkNot classifiedDOUBLE$AA_CPLACC [31,31]Acceleration component of the leading axis/spind...

  • Page 574

    List of system variables1.27 Axial system variablesSystem variables574 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$AA_CPLNUM [31,31]Numerator of the coupling factorreference:description: $AA_CPLNUM[FAx, LAx]Numerator of the link factor between the following axis/spindle FAx and the leadin...

  • Page 575

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1575List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:Cross-channelblock searchNot classifiedlinkNot classifiedSTRING$AA_CPLSETVAL[MAXNUM_AXES_IN_SYSTEM,31,32]Coupling reference of th...

  • Page 576

    List of system variables1.27 Axial system variablesSystem variables576 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedSTRING$PA_CPLSTATE[MAXNUM_AXES_IN_SYSTEM,31,]Status of the couplingr...

  • Page 577

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1577List of system variables1.27 Axial system variablesDOUBLE$PA_CPLDEN [31,31]Denominator of the coupling factorreference:description: $PA_CPLDEN[FAx, LAx]Denominator of the coupling factor between the following axis/spindle FAx and the...

  • Page 578

    List of system variables1.27 Axial system variablesSystem variables578 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock s...

  • Page 579

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1579List of system variables1.27 Axial system variablesThe indices mean:n: Number of encoderax: Machine axisIndex 1: n: Encoder number Index 2: Axis identifier unit: -min.:0max.:2147483647std:0Properties with re...

  • Page 580

    List of system variables1.27 Axial system variablesSystem variables580 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$VA_ENC_ZERO_MON_ACT [n,31]Current internal zero monitoring valuesreference:description: Incremental and distance-coded measuring systems, only for SIMODRIVE 611D:This system var...

  • Page 581

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1581List of system variables1.27 Axial system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLE$AA_COUP_CORR_DIST [31]Generic coupling: Distance to go from $A...

  • Page 582

    List of system variables1.27 Axial system variablesSystem variables582 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:Cross-channelbl...

  • Page 583

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1583List of system variables1.27 Axial system variablesunit: Linear / angular positionmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7-0-write:--0-0-ax...

  • Page 584

    List of system variables1.27 Axial system variablesSystem variables584 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$PA_CPLOUTSC [31,31]Scaling factor for the output value of the couplingreference:description: $PA_CPLOUTSC[FAx, LAx]Scaling factor for the output value of the leading axis/spi...

  • Page 585

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1585List of system variables1.27 Axial system variablesDOUBLE$AA_CPSYNCOV [31]Threshold value for velocity synchronization coarsereference:description: $AA_CPSYNCOV[AX1]Threshold value for velocity synchronization coarse of the following...

  • Page 586

    List of system variables1.27 Axial system variablesSystem variables586 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$PA_CPSYNFIP [31]Threshold value for position synchronization finereference:description: $PA_CPSYNFIP[AX1]Threshold value for position synchronization fine of the following ax...

  • Page 587

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1587List of system variables1.27 Axial system variablesDOUBLE$AA_ITR [31,4]Current setpoint value at the output of the nth transformationreference:description: The axial variable $AA_ITR[ax] determines the current setpoint value of an ax...

  • Page 588

    List of system variables1.27 Axial system variablesSystem variables588 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$VA_IW [31]Current actual WCS value of an axisreference:description: The variable $VA_IW[ ax ] determines the encoder position of an axis retransformed into the WCS. The WCS v...

  • Page 589

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1589List of system variables1.27 Axial system variablesWhen transformations are active, it must be noted that the transformation of the actual values into the BCS can be very time-consuming in the IPO cycle. An adequately long IPO cycle ...

  • Page 590

    List of system variables1.27 Axial system variablesSystem variables590 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANM...

  • Page 591

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1591List of system variables1.27 Axial system variablesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHValuation:channel-specificbloc...

  • Page 592

    List of system variables1.27 Axial system variablesSystem variables592 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1description: The variable $AA_CPMVDI[AX] returns a bit-coded value for the stated axis/spindle with active coupling that indicates the response of the coupling module to specific VD...

  • Page 593

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1593List of system variables1.27 Axial system variablesBit4 = 1: Axial signal program test (power save mode) is active.Bit5 = 1: Serupro is active.Bit6 = 1: Link object overall state axis/spindle disable is active.Bit7 = 1: Link obje...

  • Page 594

    List of system variables1.27 Axial system variablesSystem variables594 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$AA_MACHAX [31]Assignment of the physical axisreference:descripti...

  • Page 595

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1595List of system variables1.27 Axial system variablesINT$VA_IPO_NC_CHANAX [31]Assignment of machine axis to NC or channel and chnl. axis of the interpolator.reference:description: If the machine axis is currently interpolated on this N...

  • Page 596

    List of system variables1.27 Axial system variablesSystem variables596 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$VA_MOT_CLAMPING_STATE [31]State of the clamping systemreference:description: The variable $VA_MOT_CLAMPING_STATE[axn] determines the clamping state on the basis of the position ...

  • Page 597

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1597List of system variables1.27 Axial system variablesINT$VA_MOT_SENSOR_DIGI [31]Digital sensors on the motorreference:description: The variable $VA_MOT_SENSOR_DIGI[axn] determines the states of the digital sensors S4 and S5. The variab...

  • Page 598

    List of system variables1.27 Axial system variablesSystem variables598 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 1: Axis/spindle identifier unit: Linear / angular positionmin.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIO...

  • Page 599

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1599List of system variables1.27 Axial system variablesINT$AA_CPMALARM [31]Behavior of coupling module re handling of alarmsreference:description: With an active coupling, the variable $AA_CPMALARM[AX] returns a bitcoded value for the sp...

  • Page 600

    List of system variables1.28 Safety IntegratedSystem variables600 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.28Safety IntegratedINT$A_STOPESI Stop E activereference:description: $A_STOPESICurrent Safety Integrated Stop E for any axis:Val. 0: No Stop EValue not 0: For one of the axes,...

  • Page 601

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1601List of system variables1.28 Safety IntegratedProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot clas...

  • Page 602

    List of system variables1.28 Safety IntegratedSystem variables602 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$A_OUTSE[SF_MAXNUM_DIG_EXT_OUTBITS]External NCK SPL output signalreference:description: $A_OUTSE[n]n = bit number (1...192)External NCK SPL output signalNCK SPL interface for SPL sta...

  • Page 603

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1603List of system variables1.28 Safety Integratedunit: -min.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:c...

  • Page 604

    List of system variables1.28 Safety IntegratedSystem variables604 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_INSID[SF_MAXNUM_DIG_INT_INWORDS]Internal NCK SPL input signals (32-bit)reference:description: $A_INSID[n]n = doubleword number (1...6)Internal NCK SPL input signals (32-bit)Interfa...

  • Page 605

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1605List of system variables1.28 Safety Integratedmin.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:...

  • Page 606

    List of system variables1.28 Safety IntegratedSystem variables606 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$A_OUTSIP[SF_MAXNUM_DIG_INT_OUTBITS]Internal PLC SPL output signalreference:description: $A_OUTSIP[n]n = bit number (1...192)Image of an internal PLC SPL output signalInterface to th...

  • Page 607

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1607List of system variables1.28 Safety Integratedmin.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:runin stpX7-0Xaxis identifier:Valuation:...

  • Page 608

    List of system variables1.28 Safety IntegratedSystem variables608 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_MARKERSIPD[SF_MAXNUM_MARKER_WORDS]PLC SPL flag wordreference:description: $A_MARKERSIPD[n]n = doubleword number (1...6)Image of a PLC SPL flag word (32-bit)Readable only during the...

  • Page 609

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1609List of system variables1.28 Safety IntegratedINT$A_STATSID SPL status signalsreference:description: $A_STATSIDStatus of data cross-check between NCK and PLC (SPL DCC).If the value does not equal zero, an error has occurred in the SP...

  • Page 610

    List of system variables1.28 Safety IntegratedSystem variables610 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_LEVELSID SPL DCC levelreference:description: $A_LEVELSIDDisplays the fill level for signal change monitoring during data cross-check between NCK and PLC SPL (SPL DCC).Specifies the...

  • Page 611

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1611List of system variables1.28 Safety IntegratedProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:runin stpX7X7Xwrite:--0-0-axis identifier:Valuation:channel-specificblock searchNot clas...

  • Page 612

    List of system variables1.28 Safety IntegratedSystem variables612 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1write:runin stpX7-0Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNot classifiedBOOL$A_FSDP_ERROR[SF_MAXNUM_FSENDDP_DRIVER]Communications error F_SENDDPreferenc...

  • Page 613

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1613List of system variables1.28 Safety IntegratedINT$A_FSDP_DIAG[SF_MAXNUM_FSENDDP_DRIVER]Cause of the communications error F_SENDDPreference:description: $A_FSDP_DIAG[n]n = F_SENDDP relationship (1,2,3)The system variable indicates the...

  • Page 614

    List of system variables1.28 Safety IntegratedSystem variables614 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$A_FRDP_ERR_REAC[SF_MAXNUM_FRECVDP_DRIVER]Response to communications error F_RECVDPreference:description: $A_FRDP_ERR_REAC[n]n = F_RECVDP relationship (1,2,3)The system variable sets ...

  • Page 615

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1615List of system variables1.28 Safety IntegratedBOOL$A_FRDP_SUBS_ON[SF_MAXNUM_FSENDDP_DRIVER]Substitute values activereference:description: $A_FRDP_SUBS_ON[[n]n = F_RECVDP relationship (1,2,3)The system variable states whether substitu...

  • Page 616

    List of system variables1.28 Safety IntegratedSystem variables616 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Bit 5: 1 = Sequence number error detectedBit 6: 1 = CRC error detectedBits 7 - 12: ReservedBit 13: 1 = Discrepancies in the F telegram data (TelegramDiscrepancy)Bit 14: ...

  • Page 617

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1617List of system variables1.28 Safety Integratedread:runin stpX7X7Xwrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedINT$VA_STOPSI [31]Stop by Safety Integratedreference:de...

  • Page 618

    List of system variables1.29 User-specific system variablesSystem variables618 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.29User-specific system variableswrite:--0-0-axis identifier:GEOCHANMACHSPINValuation:channel-specificblock searchNot classifiedlinkNot classifiedDOUBLESYG_RM [n]Synact Rea...

  • Page 619

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1619List of system variables1.29 User-specific system variablesBOOLSYG_BM [n]Synact Boolean parameters for GUD2 block reference:description: SYG_BM[n] Synact Boolean parameters in GUD2 block.A protection level can be assigned to the para...

  • Page 620

    List of system variables1.29 User-specific system variablesSystem variables620 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuation:channel-specificblock searchPr...

  • Page 621

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1621List of system variables1.29 User-specific system variablesINTSYG_IU [n]Synact Integer parameters for UGUD blockreference:description: SYG_IU[n] Synact Integer parameters in UGUD block.A protection level can be assigned to the parame...

  • Page 622

    List of system variables1.29 User-specific system variablesSystem variables622 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:max.:std:NOAXISNUMProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuation:channel...

  • Page 623

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1623List of system variables1.29 User-specific system variablesDOUBLESYG_R4 [n]Synact Real parameters for GUD4 blockreference:description: SYG_R4[n] Synact Real parameters in GUD4 block.A protection level can be assigned to the parameter...

  • Page 624

    List of system variables1.29 User-specific system variablesSystem variables624 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuation:ch...

  • Page 625

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1625List of system variables1.29 User-specific system variablesSTRINGSYG_S4 [n]Synact String parameters for GUD4 blockreference:description: SYG_S4[n] Synact parameter string in GUD4 block. The maximum string length has been limited to 3...

  • Page 626

    List of system variables1.29 User-specific system variablesSystem variables626 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifi...

  • Page 627

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1627List of system variables1.29 User-specific system variablesCHARSYG_C5 [n]Synact Char parameters for GUD5 blockreference:description: SYG_C5[n] Synact Char parameters in GUD5 block.A protection level can be assigned to the parameters ...

  • Page 628

    List of system variables1.29 User-specific system variablesSystem variables628 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-1,8E308max.:1,8E308std:0.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:V...

  • Page 629

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1629List of system variables1.29 User-specific system variablesAXISSYG_A6 [n]Synact Axis parameters for GUD6 blockreference:description: SYG_A6[n] Synact Axis parameters in GUD6 block.A protection level can be assigned to the parameters ...

  • Page 630

    List of system variables1.29 User-specific system variablesSystem variables630 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:max.:std:""Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuati...

  • Page 631

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1631List of system variables1.29 User-specific system variablesBOOLSYG_B7 [n]Synact Boolean parameters for GUD7 block reference:description: SYG_B7[n] Synact Boolean parameters in GUD7 block.A protection level can be assigned to the para...

  • Page 632

    List of system variables1.29 User-specific system variablesSystem variables632 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:0max.:255std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuation:channel-spe...

  • Page 633

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1633List of system variables1.29 User-specific system variablesINTSYG_I8 [n]Synact Integer parameters for GUD8 blockreference:description: SYG_I8[n] Synact Integer parameters in GUD8 block.A protection level can be assigned to the parame...

  • Page 634

    List of system variables1.29 User-specific system variablesSystem variables634 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:max.:std:NOAXISNUMProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuation:channel...

  • Page 635

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1635List of system variables1.29 User-specific system variablesDOUBLESYG_R9 [n]Synact Real parameters for GUD9 blockreference:description: SYG_R9[n] Synact Real parameters in GUD9 block.A protection level can be assigned to the parameter...

  • Page 636

    List of system variables1.29 User-specific system variablesSystem variables636 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1min.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifier:Valuation:ch...

  • Page 637

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1637List of system variables1.29 User-specific system variablesSTRINGSYG_S9 [n]Synact String parameters for GUD9 blockreference:description: SYG_S9[n] Synact parameter string in GUD9 block. The maximum string length has been limited to 3...

  • Page 638

    List of system variables1.29 User-specific system variablesSystem variables638 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7Xwrite:XX7X7Xaxis identifi...

  • Page 639

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1639List of system variables1.29 User-specific system variablesCHARSYG_CS [n]Synact char parameters for SGUD blockreference:description: SYG_CS[n] Synchronization Char parameters in SGUD block.A protection level can be assigned to the pa...

  • Page 640

    List of system variables1.30 Kinematic chainSystem variables640 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.30Kinematic chainSTRING$NK_CHAIN_NAME [n]Name of the kinematic chainreference:description: Name of the nth kinematic chain. The maximum possible number of kinematic chains is set by MD $...

  • Page 641

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1641List of system variables1.30 Kinematic chainwrite:X-1X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsSTRING$NK_NEXT [n]Name of next chain elementreference:description: Name of next chain elem...

  • Page 642

    List of system variables1.30 Kinematic chainSystem variables642 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1STRING$NK_TYPE [n]Type of chain linkreference:description: Type of chain linkThe following types are permitted (No distinction is made between upper and lower case letters):"FRAME&quo...

  • Page 643

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1643List of system variables1.30 Kinematic chainIndex 1: The maximum number of kinematic chains is set by the MD $MN_MM_MAXNUM_KIN_CHAIN_ELEM. Index 2: Index of the 3 components (0 <= i <= 2). unit...

  • Page 644

    List of system variables1.30 Kinematic chainSystem variables644 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$NK_A_OFF [n]Axis offsetreference:description: Is relevant only if the chain link describes an axis. In this case, this element indicates the position of the axis in the zero point.I...

  • Page 645

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1645List of system variables1.31 Orientation transformation1.31Orientation transformationSTRING$NT_NAME [n]Name of the transformation data setreference:description: Name of the transformation data set n.Index 1: The maximum number...

  • Page 646

    List of system variables1.31 Orientation transformationSystem variables646 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1unit: -min.:max.:std:""Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-1-0-axis identifier:Valuation:c...

  • Page 647

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1647List of system variables1.31 Orientation transformationSTRING$NT_P_CHAIN_LAST_ELEM [n]Last element of the kin. chain to the workpiecereference:description: Name of an element indicated in the $NT_P_CHAIN_NAME[n,] chain. This chain el...

  • Page 648

    List of system variables1.31 Orientation transformationSystem variables648 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1The sequence of these axes defines the assignment of the geometrical axes to the channel axes in accordance with the machine data $MC_AXCONF_GEO_AX_ASSIGN_TAB.Example: The syste...

  • Page 649

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1649List of system variables1.31 Orientation transformationunit: mmmin.:-1,8E308max.:1,8E308std:0.00.00.0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-1-0-axis identifier...

  • Page 650

    List of system variables1.31 Orientation transformationSystem variables650 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-1-0-axis identifier:Valuation:channel-specificblock searchNot cl...

  • Page 651

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1651List of system variables1.31 Orientation transformationDOUBLE$NT_BASE_ORIENT [n,GEODIM]Vector of the tool base orientation for orientation transformationsreference:description: Indicates the vector of the tool orientation in the gene...

  • Page 652

    List of system variables1.31 Orientation transformationSystem variables652 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$NT_POLE_LIMIT [n]End angle toler. with interpol. through pole for 5/6-axis transf.reference:description: This MD designates an end angle tolerance for the fifth axis of t...

  • Page 653

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1653List of system variables1.31 Orientation transformationwrite:X-1-0-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsCHAR$NT_ROT_OFFSET_FROM_FRAME [n]Transfer rotary axis offset from the work offs...

  • Page 654

    List of system variables1.31 Orientation transformationSystem variables654 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1BOOL$NT_TRAFO_INCLUDES_TOOL [n]Tool handling with active transformationreference:description: This system variable indicates whether the tool for an active transformation is han...

  • Page 655

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1655List of system variables1.31 Orientation transformationINT$NT_IDENT [n,3]Identifierreference:description: These system variables contain a numerical ID for identifying a transformation data set for use by measuring cycles.They do not...

  • Page 656

    List of system variables1.32 Protection area elementsSystem variables656 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.32Protection area elementsSTRING$NP_PROT_NAME [n]Name of protection areareference:description: Name of protection area n.Index 1: The maximum number of protection areas i...

  • Page 657

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1657List of system variables1.32 Protection area elementsPPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7Xwrite:X-1X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsSTRING$NP_PROT_TYP...

  • Page 658

    List of system variables1.32 Protection area elementsSystem variables658 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1INT$NP_PROT_COLOR [n]Color of the protection area.reference:description: Data for visualizing a protection area element.The 3 low-value bytes contain the color information in RGB ...

  • Page 659

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1659List of system variables1.32 Protection area elementsINT$NP_BIT_NO [n]No. of interface bit for switchover activated / preactivatedreference:description: 64 bits are defined in the PLC interface through which protection areas can be a...

  • Page 660

    List of system variables1.32 Protection area elementsSystem variables660 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Index 2: Number of the index (0 <= i <= 2) unit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI...

  • Page 661

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1661List of system variables1.32 Protection area elementsSTRING$NP_NEXTP [n]Name of the next parallel protection area elementreference:description: Name of another protection area element ("parallel" to $NP_NEXT) that follows t...

  • Page 662

    List of system variables1.32 Protection area elementsSystem variables662 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1read:X-7X7Xwrite:X-1X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsINT$NP_D_LEVEL [n]Detailing level of a protection area elementreferen...

  • Page 663

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1663List of system variables1.32 Protection area elementsSTRING$NP_TYPE [n]Type of protection area elementreference:description: Type of protection area element. The following types are possible:FRAME: An element of this type does not co...

  • Page 664

    List of system variables1.32 Protection area elementsSystem variables664 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1DOUBLE$NP_PARA [n,3]Parameters for describing the typereference:description: Parameters for describing the protection area element. A maximum of 3 parameters are required for the ...

  • Page 665

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1665List of system variables1.32 Protection area elementswrite:X-1X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$NP_ANG [n]Angle of a coordinate rotation in the protection area element n....

  • Page 666

    List of system variables1.33 Coordinate system-specific working area limitationSystem variables666 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.33Coordinate system-specific working area limitationread:X-7X7Xwrite:X-1X7Xaxis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo r...

  • Page 667

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1667List of system variables1.33 Coordinate system-specific working area limitationBOOL$P_WORKAREA_CS_MINUS_ENABLE[n,m]Coordinate system-specific working area limitation minus validreference:description: TRUE: The coordinate system-speci...

  • Page 668

    List of system variables1.34 ePS Network ServicesSystem variables668 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.34ePS Network ServicesProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:GEOCHANMACHValuation:chann...

  • Page 669

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1669List of system variables1.34 ePS Network Servicesunit: -min.:FALSEmax.:TRUEstd:FALSEProperties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7-write:XX7X7-axis identifier:Valuation:channe...

  • Page 670

    List of system variables1.35 Tool data ISO dialect millingSystem variables670 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.35Tool data ISO dialect millingunit: -min.:max.:std:""Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:XX7X7-wri...

  • Page 671

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1671List of system variables1.35 Tool data ISO dialect millingDOUBLE$TC_ISO_D [n]ISO2 tool radius offsetreference:description: $TC_ISO_D[n]Correction value memory for the geometry of the tool radius in ISO2 mode.Is available only if ISO2...

  • Page 672

    List of system variables1.36 Tool data ISO dialect turningSystem variables672 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA11.36Tool data ISO dialect turningDOUBLE$TC_ISO_L1 [n]ISO3 tool length 1 offsetreference:description: $TC_ISO_L1[n]Correction value memory for the geometry of tool length 1 in...

  • Page 673

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1673List of system variables1.36 Tool data ISO dialect turningwrite:X-7X7-axis identifier:Valuation:channel-specificblock searchNot classifiedlinkNo restrictionsDOUBLE$TC_ISO_L2W [n]ISO3 tool length 2 wearreference:description: $TC_ISO_L...

  • Page 674

    List of system variables1.36 Tool data ISO dialect turningSystem variables674 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier:Valuation:channel-specificblock searchNot...

  • Page 675

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1675List of system variables1.36 Tool data ISO dialect turningunit: -min.:-2147483648max.:2147483647std:0Properties with regard to reading/writing:PPSAPP/SA protection levelOPIOPI protection levelOEMread:X-7X7-write:X-7X7-axis identifier...

  • Page 676

    List of system variables1.36 Tool data ISO dialect turningSystem variables676 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1

  • Page 677

    ASystem variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1677Appendix AA.1List of abbreviationsAbbreviationSource of abbreviationMeaningADI4Analog Drive Interface for 4 axesACAdaptive ControlALMActive Line ModuleInfeed module for drivesASAutomation SystemASCIIAmerican Standard Code for Inform...

  • Page 678

    Appendix AA.1 List of abbreviationsSystem variables678 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1CSBCentral Service BoardPLC moduleCTSClear To SendSignal from serial data interfacesCUTCOMCutter radius compensation Tool radius compensationDBData blockData block in the PLCDBBData-block byte Data...

  • Page 679

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1679Appendix AA.1 List of abbreviationsFIPOFine InterPOlatorFMFunction ModuleFM-NCFunction Module Numerical ControlNumerical ControlFPUFloating-point unitFloating Point UnitFRAFrame blockFRAMEData setCoordinate conversion with the compon...

  • Page 680

    Appendix AA.1 List of abbreviationsSystem variables680 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1LEDLight Emitting DiodeLight Emitting DiodeLFLine FeedPMSLSBLeast Significant BitLeast significant bitLUDLocal User DataUser dataMACMedia Access ControlMAINMain programMain program (OB1, PLC)MBMega...

  • Page 681

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1681Appendix AA.1 List of abbreviationsPNPROFINETPOPOWER ONPOUProgram Organization UnitUnit in the PLC user programPPUPanel Processing UnitPanel-based controlPTPPoint-to-pointPoint-to-PointPZDProcess data for drivesQECQuadrant Error Comp...

  • Page 682

    Appendix AA.1 List of abbreviationsSystem variables682 Parameter Manual, 03/2013, 6FC5397-6AP40-3BA1SYNACTSYNACT synchronized actionSynchronized ActionTBTerminal Board (SINAMICS)TEATesting Data Active Identifier for machine dataTCPTool Center PointTool tipTCUThin Client UnitTEATesting Data Active...

  • Page 683

    System variablesParameter Manual, 03/2013, 6FC5397-6AP40-3BA1683Appendix AA.2 Documentation overviewA.2Documentation overview

x