Navigation

  • Page 1

    OPERATION MANUAL(For Mechanical Unit) CAK36 SERIES CNC LATHES GENERAL MANAGEMENT DIVISION OF LATHE SHENYANG MACHINE TOOL CO., LTD THE PEOPLE′S REPUBLIC OF CHINA

  • Page 2

    CAK36 SERIES OPERATION MANUAL SHENYANG MACHINE TOOL CO., LTD I IT IS NECESSARY FOR YOU TO READ THIS MANUAL CAREFULLY AND THOROU- GHLY BEFORE OPERATING THE MACHINE THE CHINESE VERSION OF THIS TECHNICAL DOCUMENT IN ENGLISH IS REGARDED AS FINAL.

  • Page 3

    CAK36 SERIES MATTERS NEEDING ATTENTION TO OPERATION SHENYANG MACHINE TOOL CO., LTD IIMATTERS NEEDING ATTENTION TO OPERATION It is necessary for you to read this Operation Manual carefully and th...

  • Page 4

    CAK36 SERIES NOTICE TO ENVIRONMENTAL PROTECTION SHENYANG MACHINE TOOL CO., LTD IIINOTICE TO ENVIRONMENTAL PROTECTION The following stipulations have to be followed when the machine is finally scrapped: 1. It is necessary to deliver some harmful or non-degr...

  • Page 5

    CAK36 SERIES MATTERS NEEDING ATTENTION TO INSTALLATION SHENYANG MACHINE TOOL CO., LTD IVMATTERS NEEDING ATTENTION TO INSTALLATION In order to insure the machine running normally care must be greatly taken to following items during installation of the machine: 1. ...

  • Page 6

    CAK36 SERIES CONTENTS SHENYANG MACHINE TOOL CO., LTD V CONTENTS 1 PREFACE ····························································································· 1 2 MATTERS NEEDING ATTENTION T...

  • Page 7

    CAK36 SERIES CONTENTS SHENYANG MACHINE TOOL CO., LTD VI5.3 X-axis and Z-axis ············································································ 17 5.4 Turret ························...

  • Page 8

    CAK36 SERIES ERROR! USE THE HOME TAB TSHENYANG MACHINE TOOL CO., LTD 11 PREFACE CAK series CNC lathers include two types and sizes, i.e.: CAK3665 and CAK3626. This Operation Manual explains safety, operation, structure, maintenance, etc.. Please refer to ever...

  • Page 9

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 22 MATTERS NEEDING ATTENTION TO SAFETY PROTECTION The machine is provided with many safety devices to prevent operator and equipment from injury damage. Operator sh...

  • Page 10

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 3attacked, otherwise, resulting in trouble to make device not work normally.  Don’t change parameter values or other electric devices at random. If it must be c...

  • Page 11

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 4 Every switch and operating lever should be nimble, smooth and their actions should be checked. 2.3 Requirement after Switching on the Power Supply Notice: Whe...

  • Page 12

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 5the machine.  Excessive worn tools should be replaced by new ones beforehand for they affect on the machine of workpiece or damage the machines.  For the co...

  • Page 13

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 6the automatic cycle of whole machine manually for test. In the test, working of the machine must be smooth and the lubrication is adequate, action is agile, only al...

  • Page 14

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 7because hot chip may cause fire. 2.8 Machining Interruption Notice:  After end of machining, before the operator leave from the machine, turn off the switch of...

  • Page 15

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT THAT YOU WANT TO APPEAR HERE. SHENYANG MACHINE TOOL CO., LTD 82.11 Maintenance Operation Danger:  During the period of maintenance, anyone who is not available for this job should not operate the main circuit switch or th...

  • Page 16

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 93 HANDLING AND INSTALLATION OF THE MACHINE 3.1 Preparation before Handling the Machine 3.1.1 Ambient Requirements (for Machine Side) Machine should not be installed following location: ...

  • Page 17

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 10 During transportation, firstly fix the guard door (There are two M6 screw holes below the guard door. Fix the guard door and the guideway by means of screws of M6×16 and angle ir...

  • Page 18

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 11 Place down the machine slowly to make the foundation bolts into the bolt holes according to the Foundation Plan.  Put the wedges under the bed, rough to level the machi...

  • Page 19

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 12Notice: After leveling, the foundation bolts and nuts should be tightly screwed down. Min. graduation of the level is 0.02mm. 3.7 Maintenance and Check of Connection of Inner Devic...

  • Page 20

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 13Check if every terminal screw on the electric equipment is loose, tight it if there is when loosen, softly pull the weld element on the relay board to make sure they are well welded. ...

  • Page 21

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 14 Fig. 1-2 Foundation Plan

  • Page 22

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 154 SPECIFICATIONS OF THE MACHINE 4.1 Table of Specifications Table 1 Table of Specification of the Machine Item Unit Specification Max. swing over bed mm 360 Max. length of...

  • Page 23

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 164.2 Overall Dimensions of Packing Case of the Machine Table 2 Table of Overall Dimensions of Packing Case Type L× W× H (mm) Weight (gross/net)kg CAK3665 2520X1660X2300 (4 positions...

  • Page 24

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 175 CONSTRUCTION OF THE MACHINE 5.1 Bed of the Machine The machine bed is horizontal, overall arrangement is reasonable .Bed is made of HT300 cast iron with high strength. It is charact...

  • Page 25

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 18shaking the handwheel. Hydraulic tailstock: According to hydraulic theory, the tailstock sleeve goes ahead or go backManual tailstock: According to eccentric theory, it is locked ont...

  • Page 26

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 19Name Regulated Elements Regulated Value Clamping signal Pressure relay HED10A20150ZL24V/12 The same as pressure of chuck pressure-relief valve Clamping force of tailstock Pressure-reli...

  • Page 27

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 20 Fig. 2-1 Arrangement of the Machine

  • Page 28

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 21 Fig. 3 Spindle Structure

  • Page 29

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 22 Fig. 4 Screw Rod for X-axis

  • Page 30

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 23 Fig. 5 Hydraulic Principle Diagram

  • Page 31

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 246 INSPECTION AND MAINTENANCE 6.1 Routine Inspection Table 5 Table of Routine Inspection Routine Inspection No. Checked Position Checked Object Remarks 1 Oil gauge for lubricating posi...

  • Page 32

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 25Routine Inspection No. Checked Position Checked Object Remarks 15 Machining accuracy of the machine  Check if the machining accuracy is kept within requirements given by the machi...

  • Page 33

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 26No. Checked Position Maintained Object Period 11 Electric units Limit switch Sensors Solenoid valve  Check and tighten the installing screws and wiring screws  Check their funct...

  • Page 34

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 27the service life of the belts and bearings, contrarily, if the tension is too small, the belts won't have enough force to transfer the rated power. The tension of the belts can be adju...

  • Page 35

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 287 SPARE PARTS Table 7 List of Spare Parts Number of Drawing Name Material Qty. Remarks CAK3675v-5068 Gib for cross slide HT200 1 CAK3675v-5059 Guideway plate Fluorocabon plastic plat...

  • Page 36

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 29 Material:fluorocabon plastic board Quantity: 1 Fig.6 Spare Part CAK3675v-5059

  • Page 37

    CAK36 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEXT SHENYANG MACHINE TOOL CO., LTD 30 Material: HT200 Quantity: 1 Fig. 7 Spare Part CAK3675v-5068

x