Navigation

  • Page 1

    TechnoCNC Router SystemsIn Business Since 1986Inc.Tel: 516/328-3970 · Web: http://www.technocnc.com · E-mail: support@technocnc.com1HTT03260910CNC REINDICATIONINSTRUCTIONSMATERIALS NEEDED FOR REINDICATION• Level Beam - PICTURE 1• M5 Allen Wrench - PICTURE 2• Mallet - PICTURE 3•...

  • Page 2

    Tel: 516/328-3970 · Web: http://www.technocnc.com · E-mail: support@technocnc.com2TechnoCNC Router SystemsIn Business Since 1986Inc.HTT03260910CNC REINDICATIONINSTRUCTIONSII. INDICATING THE X-AXIS TO THE Y-AXISSTEP 1: Jog the X-axis from one side of the precision square to the other. Watch...

  • Page 3

    TechnoCNC Router SystemsIn Business Since 1986Inc.Tel: 516/328-3970 · Web: http://www.technocnc.com · E-mail: support@technocnc.com3HTT03260910CNC REINDICATIONINSTRUCTIONSIII. INDICATING THE X-AXIS TO THE TABLE SURFACESTEP 1: Remove the precision square from the table surface and replace i...

  • Page 4

    Tel: 516/328-3970 · Web: http://www.technocnc.com · E-mail: support@technocnc.com4TechnoCNC Router SystemsIn Business Since 1986Inc.HTT03260910CNC REINDICATIONINSTRUCTIONSIV. SQUARING THE SPINDLE Although your spindle may appear different from the Automatic Tool Change Spindles and the Fix...

  • Page 5

    TechnoCNC Router SystemsIn Business Since 1986Inc.Tel: 516/328-3970 · Web: http://www.technocnc.com · E-mail: support@technocnc.com5HTT03260910CNC REINDICATIONINSTRUCTIONSV. ADJUSTING THE TORSION BARA Torsion Bar has been added to the back of the X-slide to support the weight large spindle...

  • Page 6

    Tel: 516/328-3970 · Web: http://www.technocnc.com · E-mail: support@technocnc.com6TechnoCNC Router SystemsIn Business Since 1986Inc.HTT03260910CNC REINDICATIONINSTRUCTIONSSTEP 5: Next, jog the X-slide to the center of the table. Tighten the Adjusting Screw on the loose end to obtain a zero...

x