Navigation

  • Page 1

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com1BT1212 User Manual(HTT06681172)This document will provide a quick guide to the operating procedure of the Techno BT1212 CNC Router with a NCstudio Controller. The BT1212 CNC Router is powered by high p...

  • Page 2

    2Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)TABLE OF CONTENTSI 3,Safety Instructions ............................................................... Page 3 4,Colleting Guidelines ......................................

  • Page 3

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com3BT1212 User Manual(HTT06681172)1. Keepfingers,hands,andallotherobjectsawayfrommachinewhilepowerison.2. Disconnectpowertoallsystemcomponentswhennotinuse,whenchangingaccessories,andbeforeservicing.3. Donot...

  • Page 4

    4Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)WARNING! THE SPINDLE WILL BE DAMAGED IF UNBALANCED EQUIPMENT IS USED. AIR SUPPLY MUST BE FILTERED AND DRY.

  • Page 5

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com5BT1212 User Manual(HTT06681172)2.4 Mode Selection.The machine has two modes that can be selected by pressing the button.The mode will be indicated on the bottom left side of the display.The two modes an...

  • Page 6

    6Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)2.5 Functions of the Keys:The Function of the keys are shown below.Override+ Increase of feedrate override; Input the number 7; increase of spindle gear with the help of au...

  • Page 7

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com7BT1212 User Manual(HTT06681172)2.6 Combination Keys.TheFunctionofthekeysareshownbelow.pressthefirstkeythenthesecond;release the two keys simultaneously after the corresponding content appears.Touch-OFF Z...

  • Page 8

    8Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)III. Operating Tutorials. 3.1- Jogging the machine and changing from High/Low Jog Speed.ToJogthemachineholddownoneofthedirectionalkeysonthekeypad.ThekeypadhasX-,Y+,X+,Y-,Z+...

  • Page 9

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com9BT1212 User Manual(HTT06681172)3.4- Adjusting the XYZ Zero position/WCS/User Origin. XYZzeroposition,WorkingCoordinateSystem(WCS),andUserOriginareallthesamething. DifferentCAMsystemsandusersjustnametheco...

  • Page 10

    10Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)3.5- Loading a G-code File.3.6 Checking Process Time and File Size. BeforerunningaG-codefileitisagoodideatocheckthatitwillnottravelinexcessofthetable,ormaterial.Onceafilei...

  • Page 11

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com11BT1212 User Manual(HTT06681172)3.7 Running a G-code file.OncetheXYZoriginhasbeensetaspersection3.4andthefilehasbeenloadedaspersection3.5theuserisreadytoruntheG-codefile.ToruntheG-codefilesimplepress.The...

  • Page 12

    12Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)4.1- Alternating between Override and Programmed Feedrates.IV. Advanced Tutorials. ThecontrollercanrunG-codefileswithspeedsetbytheuseronthekeypad,overridespeed,orwithspeed...

  • Page 13

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com13BT1212 User Manual(HTT06681172)4.2 Setting the Override Speed for a G-code file.Fromthemainscreen,pressMenutoaccesstheMenuscreen. UsethearrowkeystomovethecursorandhighlightPressOKtoselectthisoptionand...

  • Page 14

    14Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)4.3 Setting the Table Size.Fromthemainscreen,pressMenutoaccesstheMenuscreen. Usethearrowkeystomovethecursorand highlight PressOKtoselect.TheMFRparametersscreenwillnowope...

  • Page 15

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com15BT1212 User Manual(HTT06681172)Notes On the G-code FileIfapartrequiresmultipletools,itisbesttooutputadifferentfileforeachpart.IftheG-codefilereferencesatoolnumberhigherthanT10,thenthecontrollerwillgivea...

  • Page 16

    16Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172) HAND-HELD CONTROLLER COMMON TASKSFunction Information of Each Single-key Press a key lightly to complete the called function and then release the keyOverride+ Increase of...

  • Page 17

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com17BT1212 User Manual(HTT06681172)This section outlines the most common tasks required to operate the HD Mini and HD CNC Router Series.

  • Page 18

    18Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)PresstheMenubutton. Select“2.USBfiles”toaccesstheflashdrive. OnlyaG-codefilewithan“nc”extensionwithshow. Scrollthroughthefilewith and SelectfilebypressingOK....

  • Page 19

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com19BT1212 User Manual(HTT06681172)Press MenuOperations Select WSC G54 Origin 1 G55 Origin 2 . . .WCS

  • Page 20

    20Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)Single-key Function Table

  • Page 21

    Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.com21BT1212 User Manual(HTT06681172)TheFunctionofthekeysareshownbelow.pressthefirstkeythenthesecond;release the two keys simultaneously after the corresponding content appears.Combination Key Function Inform...

  • Page 22

    22Call: 1-631-648-7481 or Visit: actionURI(http://support.technocnc.com/):support.technocnc.comBT1212 User Manual(HTT06681172)www.technocnc.com(HTT06091113)Tel: 516-328-39707/2014Techno CNC Systems, LLC., Terms and Conditions For Limited Warranty and Repairs WarrantyWARRANTYAll Techno CNC Systems...

x