Navigation

  • Page 1

    www.technocnc.com(HTT06091113)Tel: 516-328-3970 • Email: support@technocnc.com11. System Characteristics of NK105The NK105 is a standalone motion controller that is operated with a hand held controller that connects to a main control box. The software running the system is called Ncstudio. It i...

  • Page 2

    www.technocnc.com(HTT06091113)Tel: 516-328-3970 • Email: support@technocnc.com22. Basic Concepts of NK105NK105 application system involves various concepts, such as workpiece coordinate system, mechanical coordinate system, operation mode, operation state etc. Therefore, it is necessary for us...

  • Page 3

    www.technocnc.com(HTT06091113)Tel: 516-328-3970 • Email: support@technocnc.comii2.2. Machine Coordinate SystemThe coordinate system describes the motion of the machine tool, in the XYZ plane. For the sake of unification, the standard coordinate system adopts the right-hand rule, as shown in Fig...

  • Page 4

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 3—i Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 3. Functions & Operation Methods of Panel Keys 3.1. Brief Introduction The arrangement of panel keys...

  • Page 5

    3—ii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Table 1 Single-key function table Key icon Function Increases spindle speed when the spindl...

  • Page 6

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 3—iii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Adjustment of manual High/ Low speed in processing page/ Exit Processing page/ Cancel of various sele...

  • Page 7

    3—iv Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 key used to unload file should be pressed. 3.4. Backing to Machine Origin Machine origin is ...

  • Page 8

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 3—v Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 4-3 Setting picture of [back to mechanical origin speed] Press to enter modification mode and cl...

  • Page 9

    3—vi Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 4-4 Setting picture of [back to mechanical origin direction] Press to modify the val...

  • Page 10

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 3—vii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 corresponding parameters previously set.

  • Page 11

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 4—i Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 4. Processing Operation There are two processing modes, Manual and Automatic. 4.1. Manual Processing M...

  • Page 12

    4—ii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Move cursor to select the parameter to be by pressing up key or down key . After selection,...

  • Page 13

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 4—iii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 combination key + , is used to activate the Touch off sequence. The Z axis will slowly move down and ...

  • Page 14

    4—iv Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 6-22 Screen display diagram of different workpiece coordinate systems 4.2. Auto Process...

  • Page 15

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 4—v Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 6-23 File selection page Move cursor to select a file list by pressing or . Then press to enter ...

  • Page 16

    4—vi Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Pause the file by pressing the combination key + .  Continue after pause Resume the file ...

  • Page 17

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 4—vii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 6-26 Page after exit from processing To resume from breakpoint 1 press + . The system will disp...

  • Page 18

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—i Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 5. Menu Page 5.1. Summarization The default mode after system start-up is manual mode. The page for this...

  • Page 19

    5—ii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Please refer to chapter 6.1.1 manual processing for further information. Press to enter men...

  • Page 20

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—iii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 5-6 Submenus of all different levels under machine parameter configuration page 5.2.1. Pulse Equ...

  • Page 21

    5—iv Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 The procedure for modification of this value is the same as modifying [back to mechanical o...

  • Page 22

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—v Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 speed can be changed while the spindle is running by using the handheld controller or by using the contr...

  • Page 23

    5—vi Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040  [Maximum spindle speed] This sets the maximum speed of the spindle. This should be the s...

  • Page 24

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—vii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 B GX12 Extended input 2 C GX13 Extended input 3 D GX14 Extended input 4 E GX15 Extended input 5 F ...

  • Page 25

    5—viii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 2) Exit to the main screen. 3) Place the block on the table, under the tool. 4) Press u...

  • Page 26

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—ix Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 5.2.10. Tool Change Parameter Setup The parameters related to tool change in NK105 system are all set h...

  • Page 27

    5—x Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 5-8 Submenus of different levels under processing parameters configuration page 5.3.1. ...

  • Page 28

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—xi Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 5.3.3. Acceleration Configuration Sets the values of jerk and single-axis acceleration. This determines...

  • Page 29

    5—xii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 5.3.8. Processing Time Range This menu will display the file envelope and the amount of tim...

  • Page 30

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—xiii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 5.4. System File Parameter This menus provides access to system and file parameters. File levels inc...

  • Page 31

    5—xiv Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 After finding the desired file, press to execute the corresponding operation. If there is ...

  • Page 32

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—xv Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Follow the on screen instructions and press .Once the factory parameters are restored a reboot is requi...

  • Page 33

    5—xvi Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Move cursor to select and then press . Keep Still-The machine will remain in the position o...

  • Page 34

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—xvii Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 XY start coordinate: Is where the file will start from, usually 0. Processing manner: This determin...

  • Page 35

    5—xviii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 5-15 Submenus of all different levels in system diagnosis page 5.6.1. Self-detectio...

  • Page 36

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 5—xix Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 Fig. 5-16 Currently pressed button display page Press to exit from this page. 5.6.5. System Upgrade ...

  • Page 37

    5—xx Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 “upgrade system” means deleting the original system and upgrading the system with the ne...

  • Page 38

    Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com 6-i Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 6. System Installation 6.1. Basic Configuration of NcstudioTM  Basic configuration of NK105 system Memor...

  • Page 39

    6-ii Tel: 800-819-3366 Fax: 516-358-2576 E-mail: support@technocnc.com Website: www.technocnc.com Address: 2101 Jericho Turnpike, New Hyde Park, NY 11040 6.2.3. System Application Update Updating the system image/firmware will also update the Syste...

x